Navier-Stokes Computations of the NREL Airfoil Using a κ — ω Turbulent Model at High Angles of Attack

1995 ◽  
Vol 117 (4) ◽  
pp. 304-310 ◽  
Author(s):  
S. L. Yang ◽  
Y. L. Chang ◽  
O. Arici
Keyword(s):  
Turbulent Flow ◽  
Stokes Equations ◽  
Solid Wall ◽  
Wind Tunnel Test ◽  
Navier Stokes ◽  
Mean Flow ◽  
Approximate Factorization ◽  
Navier Stokes Equations ◽  
Reynolds Number Effects ◽  
Model Equations

This paper presents a two-dimensional numerical simulation of the turbulent flow fields for the NREL (National Renewable Energy Laboratory) S809 airfoil. The flow is modeled as steady, viscous, turbulent, and incompressible. The pseudo-compressible formulation is used for the time-averaged Navier-Stokes equations so that a time marching scheme developed for the compressible flow can be applied directly. The turbulent flow is simulated using Wilcox’s modified κ — ω model to account for the low Reynolds number effects near a solid wall and the model’s sensitivity to the freestream conditions. The governing equations are solved by an implicit approximate-factorization scheme. To correctly model the convection terms in the mean-flow and turbulence model equations, the symmetric TVD (Total Variational Diminishing) scheme is incorporated. The methodology developed is then applied to analyze the NREL S809 airfoil at various angles of attack (α) from 1 to 45 degrees. The accuracy of the numerical results is compared with the available Delft wind tunnel test data. For comparison, two Eppler code results at low angles of attack are also included. Depending on the value of α, preliminary results show excellent to fairly good agreement with the experimental data. Directions for future work are also discussed.

Numerical Prediction of Turbulent Wakes Behind a Square Cylinder

1998 ◽  
Vol 14 (1) ◽  
pp. 23-29
Author(s):  
Robert R. Hwang ◽  
Sheng-Yuh Jaw
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Wall Region ◽  
Square Cylinder ◽  
Mean Velocity ◽  
Navier Stokes Equations ◽  
Turbulent Vortex Shedding ◽  
Model Equations ◽  
Good Agreement

ABSTRACTThis paper presents a numerical study on turbulent vortex shedding flows past a square cylinder. The 2D unsteady periodic shedding motion was resolved in the calculation and the superimposed turbulent fluctuations were simulated with a second-order Reynolds-stress closure model. The calculations were carried out by solving numerically the fully elliptic ensemble-averaged Navier-Stokes equations coupled with the turbulence model equations together with the two-layer approach in the treatment of the near-wall region. The performance of the computations was evaluated by comparing the numerical results with data from available experiments. Results indicate that the present study gives good agreement in the shedding frequency and mean drag as well as in some phase profiles of the mean velocity.

Computational analysis of turbulent flow through an eccentric annulus under different temperature conditions

2018 ◽  
Vol 28 (9) ◽  
pp. 2189-2207 ◽  
Author(s):  
Erman Ulker ◽  
Sıla Ovgu Korkut ◽  
Mehmet Sorgun
Keyword(s):  
Turbulent Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Content Type ◽  
Non Linear ◽  
Fully Developed Turbulent Flow ◽  
Effects Of Temperature ◽  
Eccentric Annuli ◽  
Pipe Rotation

Purpose The purpose of this paper is to solve Navier–Stokes equations including the effects of temperature and inner pipe rotation for fully developed turbulent flow in eccentric annuli by using finite difference scheme with fixing non-linear terms. Design/methodology/approach A mathematical model is proposed for fully developed turbulent flow including the effects of temperature and inner pipe rotation in eccentric annuli. Obtained equation is solved numerically via central difference approximation. In this process, the non-linear term is frozen. In so doing, the non-linear equation can be considered as a linear one. Findings The convergence analysis is studied before using the method to the proposed momentum equation. It reflects that the method approaches to the exact solution of the equation. The numerical solution of the mathematical model shows that pressure gradient can be predicted with a good accuracy when it is compared with experimental data collected from experiments conducted at Izmir Katip Celebi University Flow Loop. Originality/value The originality of this work is that Navier–Stokes equations including temperature and inner pipe rotation effects for fully developed turbulent flow in eccentric annuli are solved numerically by a finite difference method with frozen non-linear terms.

scholarly journals Asymptotically based self-similarity solution of the Navier–Stokes equations for a porous tube with a non-circular cross-section

2017 ◽  
Vol 826 ◽  
pp. 396-420 ◽  
Author(s):  
M. Bouyges ◽  
F. Chedevergne ◽  
G. Casalis ◽  
J. Majdalani
Keyword(s):  
Cross Section ◽  
Similarity Solution ◽  
Stokes Equations ◽  
Circular Cross Section ◽  
Internal Flow ◽  
Navier Stokes ◽  
Solid Rocket Motor ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Radial Deviation

This work introduces a similarity solution to the problem of a viscous, incompressible and rotational fluid in a right-cylindrical chamber with uniformly porous walls and a non-circular cross-section. The attendant idealization may be used to model the non-reactive internal flow field of a solid rocket motor with a star-shaped grain configuration. By mapping the radial domain to a circular pipe flow, the Navier–Stokes equations are converted to a fourth-order differential equation that is reminiscent of Berman’s classic expression. Then assuming a small radial deviation from a fixed chamber radius, asymptotic expansions of the three-component velocity and pressure fields are systematically pursued to the second order in the radial deviation amplitude. This enables us to derive a set of ordinary differential relations that can be readily solved for the mean flow variables. In the process of characterizing the ensuing flow motion, the axial, radial and tangential velocities are compared and shown to agree favourably with the simulation results of a finite-volume Navier–Stokes solver at different cross-flow Reynolds numbers, deviation amplitudes and circular wavenumbers.

Analytical and Semi-empirical Models of Tornadoes and Downbursts

2021 ◽  
Author(s):  
Djordje Romanic ◽  
Horia Hangan
Keyword(s):  
Numerical Simulations ◽  
Stokes Equations ◽  
Empirical Models ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Boundary Layer Equations ◽  
Simplifying Assumptions ◽  
The Individual ◽  
Semi Empirical

Analytical and semi-empirical models are inexpensive to run and can complement experimental and numerical simulations for risk analysis-related applications. Some models are developed by employing simplifying assumptions in the Navier-Stokes equations and searching for exact, but many times inviscid solutions occasionally complemented by boundary layer equations to take surface effects into account. Other use simple superposition of generic, canonical flows for which the individual solutions are known. These solutions are then ensembled together by empirical or semi-empirical fitting procedures. Few models address turbulent or fluctuating flow fields, and all models have a series of constants that are fitted against experiments or numerical simulations. This chapter presents the main models used to provide primarily mean flow solutions for tornadoes and downbursts. The models are organized based on the adopted solution techniques, with an emphasis on their assumptions and validity.

Low-Frequency Fluctuations In The Flow Over Confined Cylinder In A Narrow Rectangular Duct At Re = 3 750

2017 ◽  
Vol 12 (1) ◽  
pp. 43-49
Author(s):  
Egor Palkin ◽  
Rustam Mullyadzhanov
Keyword(s):  
Stokes Equations ◽  
Low Frequency ◽  
Horseshoe Vortex ◽  
Navier Stokes ◽  
Infinite Cylinder ◽  
Rectangular Duct ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Frequency Modulations ◽  
Bounding Surfaces

Flows between two closely spaced bounding surfaces are frequently appear in engineering applications and natural flows. In current paper the flow over a cylinder in a narrow rectangular duct was investigated by numerical computations of Navier-Stokes equations using Large eddy simulations (LES) at ReD = 3 750 based on cylinder diameter and the bulk velocity at inflow boundary. The influence of the bounding walls was demonstrated by comparing mean flow streamlines with the flow over an infinite cylinder at close Reynolds numbers. A comparison between the time-averaged velocity field in front and past the cylinder with experimental from the literature data showed good agreement although the characteristic horseshoe vortex structures are highly sensitive to Reynolds number and turbulence level at inflow boundary. Most energetic modes in recirculating region were revealed by spectral analysis. These low-frequency modulations were characterized by the pair of dominating vortices which are expected to have high influence on the heat transfer in near wake of the cylinder.

scholarly journals Three-Dimensional Turbulent Vortex Shedding From a Surface-Mounted Square Cylinder: Predictions With Large-Eddy Simulations and URANS

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
B. A. Younis ◽  
A. Abrishamchi
Keyword(s):  
Experimental Data ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Large Eddy

The paper reports on the prediction of the turbulent flow field around a three-dimensional, surface mounted, square-sectioned cylinder at Reynolds numbers in the range 104–105. The effects of turbulence are accounted for in two different ways: by performing large-eddy simulations (LES) with a Smagorinsky model for the subgrid-scale motions and by solving the unsteady form of the Reynolds-averaged Navier–Stokes equations (URANS) together with a turbulence model to determine the resulting Reynolds stresses. The turbulence model used is a two-equation, eddy-viscosity closure that incorporates a term designed to account for the interactions between the organized mean-flow periodicity and the random turbulent motions. Comparisons with experimental data show that the two approaches yield results that are generally comparable and in good accord with the experimental data. The main conclusion of this work is that the URANS approach, which is considerably less demanding in terms of computer resources than LES, can reliably be used for the prediction of unsteady separated flows provided that the effects of organized mean-flow unsteadiness on the turbulence are properly accounted for in the turbulence model.

Turbulent Flow Velocity Between Rotating Co-Axial Disks of Finite Radius

1989 ◽  
Vol 111 (3) ◽  
pp. 333-340 ◽  
Author(s):  
J. F. Louis ◽  
A. Salhi
Keyword(s):  
Turbulent Flow ◽  
Turbulence Model ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Finite Radius ◽  
Navier Stokes Equations ◽  
Rotating Cavity ◽  
Tangential Wall ◽  
Frictional Forces

The turbulent flow between two rotating co-axial disks is driven by frictional forces. The prediction of the velocity field can be expected to be very sensitive to the turbulence model used to describe the viscosity close to the walls. Numerical solutions of the Navier–Stokes equations, using a k–ε turbulence model derived from Lam and Bremhorst, are presented and compared with experimental results obtained in two different configurations: a rotating cavity and the outflow between a rotating and stationary disk. The comparison shows good overall agreement with the experimental data and substantial improvements over the results of other analyses using the k–ε models. Based on this validation, the model is applied to the flow between counterrotating disks and it gives the dependence of the radial variation of the tangential wall shear stress on Rossby number.

Improved κ-ɛ Modelling of Impeller Flow Performance of a Mixed-Flow Pump under off-Design Operating States

1993 ◽  
Vol 207 (4) ◽  
pp. 219-229 ◽  
Author(s):  
S M Fraser ◽  
Y Zhang
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Careful Analysis ◽  
Navier Stokes ◽  
Mean Flow ◽  
Mixed Flow ◽  
Navier Stokes Equations ◽  
Flow Through ◽  
The Mean ◽  
Flow Pump

Three-dimensional turbulent flow through the impeller passage of a model mixed-flow pump has been simulated by solving the Navier-Stokes equations with an improved κ-ɛ model. The standard κ-ɛ model was found to be unsatisfactory for solving the off-design impeller flow and a converged solution could not be obtained at 49 per cent design flowrate. After careful analysis, it was decided to modify the standard κ-ɛ model by including the extra rates of strain due to the acceleration of impeller rotation and geometrical curvature and removing the mathematical ill-posedness between the mean flow turbulence modelling and the logarithmic wall function.

Sign in / Sign up

Export Citation Format

Share Document