Endwall and Unsteady Flow Phenomena in an Axial Turbine Stage

1995 ◽  
Vol 117 (4) ◽  
pp. 562-570 ◽  
Author(s):  
H. E. Gallus ◽  
J. Zeschky ◽  
C. Hah
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Radial Distribution ◽  
Three Dimensional ◽  
Hot Wire ◽  
Turbine Stage ◽  
Flow Properties ◽  
Blade Row ◽  
Secondary Flow Field

Detailed experimental and numerical studies have been performed in a subsonic, axial-flow turbine stage to investigate the secondary flow field, the aerodynamic loss generation, and the spanwise mixing under a stage environment. The experimental study includes measurements of the static pressure distribution on the rotor blade surface and the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The rotor exit flow field was measured with an unsteady hot-wire probe, which has high temporal and spatial resolution. Both steady and unsteady numerical analyses were performed with a three-dimensional Navier–Stokes code for the multiple blade rows. Special attention was focused on how well the steady multiple-blade-row calculation predicts the rotor exit flow field and how much the blade interaction affects the radial distribution of flow properties at the stage exit. Detailed comparisons between the measurement and the steady calculation indicate that the steady multiple-blade-row calculation predicts the overall time-averaged flow field very well. However, the steady calculation does not predict the secondary flow at the stage exit accurately. The current study indicates that the passage vortex near the hub of the rotor is transported toward the midspan due to the blade interaction effects. Also, the structure of the secondary flow field at the exit of the rotor is significantly modified by the unsteady effects. The time-averaged secondary flow field and the radial distribution of the flow properties, which are used for the design of the following stage, can be predicted more accurately with the unsteady flow calculation.

scholarly journals Endwall and Unsteady Flow Phenomena in an Axial Turbine Stage

1994 ◽  
Author(s):  
H. E. Gallus ◽  
J. Zeschky ◽  
C. Hah
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Radial Distribution ◽  
Three Dimensional ◽  
Hot Wire ◽  
Turbine Stage ◽  
Flow Properties ◽  
Blade Row ◽  
Secondary Flow Field

Detailed experimental and numerical studies have been performed in a subsonic, axial-flow turbine stage to investigate the secondary flow field, the aerodynamic loss generation, and the spanwise mixing under a stage environment. The experimental study includes measurements of the static pressure distribution on the rotor blade surface and the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The rotor exit flow field was measured with an unsteady hot-wire probe which has high temporal and spatial resolution. Both steady and unsteady numerical analyses were performed with a three-dimensional Navier-Stokes code for the multiple blade rows. Special attention was focused on how well the steady multiple-blade-row calculation predicts the rotor exit flow field and how much the blade interaction affects the radial distribution of flow properties at the stage exit. Detailed comparisons between the measurement and the steady calculation indicate that the steady multiple-blade-row calculation predicts the overall time-averaged flow field very well. However, the steady calculation does not predict the secondary flow at the stage exit accurately. The current study indicates that the passage vortex near the hub of the rotor is transported toward the mid-span due to the blade interaction effects. And, the structure of the secondary flow field at the exit of the rotor is significantly modified by the unsteady effects. The time-averaged secondary flow field and the radial distribution of the flow properties, which are uses for the design of the following stage, can be predicted more accurately with the unsteady flow calculation.

Time Accurate Euler Simulation of Interaction of Nozzle Wake and Secondary Flow With Rotor Blade in an Axial Turbine Stage Using Nonreflecting Boundary Conditions

1995 ◽  
Author(s):  
S. Fan ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Boundary Conditions ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Computational Domain ◽  
Turbine Stage ◽  
Axial Turbine ◽  
Unsteady Pressure

The objective of this paper is to investigate the three dimensional unsteady flow interactions in a turbomachine stage. A three-dimensional time accurate Euler code has been developed using an explicit four-stage Runge-Kutta scheme. Three-dimensional unsteady non-reflecting boundary conditions are formulated at the inlet and at the outlet of the computational domain to remove the spurious numerical reflections. The three-dimensional code is first validated for 2-D and 3-D cascades with harmonic vortical inlet distortions. The effectiveness of non reflecting boundary conditions is demonstrated. The unsteady Euler solver is then used to simulate the propagation of nozzle wake and secondary flow through rotor and the resulting unsteady pressure field in an axial turbine stage. The three dimensional and time dependent propagation of nozzle wakes in the rotor blade row and the effects of nozzle secondary flow on the rotor unsteady surface pressure and passage flow field are studied. It was found that the unsteady flow field in the rotor is highly three-dimensional and the nozzle secondary flow has significant contribution to the unsteady pressure on the blade surfaces. Even though the steady flow at the midspan is nearly two-dimensional, the unsteady flow is 3-D and the unsteady pressure distribution can not by predicted by a 2-D analysis.

scholarly journals Experimental Study of a 3D Wake Decay and Secondary Flows Behind a Rotor Blade Row of a Low Speed Compressor Stage

1996 ◽  
Author(s):  
A. S. Witkowski ◽  
T. J. Chmielniak ◽  
M. D. Strozik
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Compressor Stage ◽  
Blade Row

Detailed measurements have been performed in a low pressure axial flow compressor stage to investigate the structure of the secondary flow field and the three-dimensional wake decay at different axial locations before and behind the rotor. The three dimensional flow field upstream and downstream of the rotor and on the centerline of the stator blade passage have been sampled periodically using a straight and a 90 degree triple-split fiber probe. Radial measurements at 39 radial stations were carried out at chosen axial positions in order to get the span-wise characteristics of the unsteady flow. Taking the experimental values of the unsteady flow velocities and turbulence properties, the effects of the rotor blade wake decay and secondary flow on the blade row spacing and stator passage flow at different operating conditions are discussed. For the normal operating point, the component of radial turbulent intensities in the leakage-flow mixing region is found to be much higher than the corresponding axial and tangential components. But for a higher value of the flow coefficient the relations are different.The results of the experiments show that triple-split fiber probes, straight and 90 degree measurements, combined with the ensemble average technique are a very useful method for the analysis of rotor flow in turbomachinery. Tip clearance vortex, secondary flow near the hub and radial flow in the wake, turbulent intensity and Reynolds stresses and also the decay of the rotor wakes can be obtained by this method.

Time-Accurate Euler Simulation of Interaction of Nozzle Wake and Secondary Flow With Rotor Blade in an Axial Turbine Stage Using Nonreflecting Boundary Conditions

1996 ◽  
Vol 118 (4) ◽  
pp. 663-678 ◽  
Author(s):  
S. Fan ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Boundary Conditions ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Turbine Stage ◽  
Unsteady Pressure ◽  
Nonreflecting Boundary Conditions

The objective of this paper is to investigate the three-dimensional unsteady flow interactions in a turbomachine stage. A three-dimensional time-accurate Euler code has been developed using an explicit four-stage Runge–Kutta scheme. Three-dimensional unsteady nonreflecting boundary conditions are formulated at the inlet and the outlet of the computational domain to remove the spurious numerical reflections. The three-dimensional code is first validated for two-dimensional and three-dimensional cascades with harmonic vortical inlet distortions. The effectiveness of the nonreflecting boundary conditions is demonstrated. The unsteady Euler solver is then used to simulate the propagation of nozzle wake and secondary flow through the rotor and the resulting unsteady pressure field in an axial turbine stage. The three-dimensional and time-dependent propagation of nozzle wakes in the rotor blade row and the effects of nozzle secondary flow on the rotor unsteady surface pressure and passage flow field are studied. It was found that the unsteady flow field in the rotor is highly three dimensional and the nozzle secondary flow has significant contribution to the unsteady pressure on the blade surfaces. Even though the steady flow at the midspan is nearly two dimensional, the unsteady flow is three dimensional and the unsteady pressure distribution cannot be predicted by a two-dimensional analysis.

scholarly journals Incidence Angle and Pitch-Chord Effects on Secondary Flows Downstream of a Turbine Cascade

1992 ◽  
Author(s):  
A. Perdichizzi ◽  
V. Dossena
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Incidence Angle ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Oil Flow ◽  
Secondary Velocity ◽  
Secondary Flow Field

This paper describes the results of an experimental investigation of the three-dimensional flow downstream of a linear turbine cascade at off-design conditions. The tests have been carried out for five incidence angles from −60 to +35 degrees, and for three pitch-chord ratios: s/c = 0.58,0.73,0.87. Data include blade pressure distributions, oil flow visualizations, and pressure probe measurements. The secondary flow field has been obtained by traversing a miniature five hole probe in a plane located at 50% of an axial chord downstream of the trailing edge. The distributions of local energy loss coefficients, together with vorticity and secondary velocity plots show in detail how much the secondary flow field is modified both by incidence and cascade solidity variations. The level of secondary vorticity and the intensity of the crossflow at the endwall have been found to be strictly related to the blade loading occurring in the blade entrance region. Heavy changes occur in the spanwise distributions of the pitch averaged loss and of the deviation angle, when incidence or pitch-chord ratio is varied.

Effects of Stator Wakes and Spanwise Nonuniform Inlet Conditions on the Rotor Flow of an Axial Turbine Stage

1993 ◽  
Vol 115 (1) ◽  
pp. 128-136 ◽  
Author(s):  
J. Zeschky ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Axial Flow ◽  
Tip Clearance ◽  
Hot Wire ◽  
Turbine Stage ◽  
Static Pressure Distribution ◽  
Inlet Conditions ◽  
Experimental Values ◽  
Rotor Flow

Detailed measurements have been performed in a subsonic, axial-flow turbine stage to investigate the structure of the secondary flow field and the loss generation. The data include the static pressure distribution on the rotor blade passage surfaces and radial-circumferential measurements of the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The flow field at the rotor outlet is derived from unsteady hot-wire measurements with high temporal and spatial resolution. The paper presents the formation of the tip clearance vortex and the passage vortices, which are strongly influenced by the spanwise nonuniform stator outlet flow. Taking the experimental values for the unsteady flow velocities and turbulence properties, the effect of the periodic stator wakes on the rotor flow is discussed.

Vortex-Wake-Blade Interaction in a Shrouded Axial Turbine

2005 ◽  
Vol 127 (4) ◽  
pp. 699-707 ◽  
Author(s):  
J. Schlienger ◽  
A. I. Kalfas ◽  
R. S. Abhari
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Surprising Result ◽  
Rotor Wake ◽  
Time Resolved ◽  
Axial Turbine ◽  
Passage Vortex ◽  
Blade Row ◽  
Stator Blade ◽  
Secondary Flow Field

This paper presents time-resolved flow field measurements at the exit of the first rotor blade row of a two stage shrouded axial turbine. The observed unsteady interaction mechanism between the secondary flow vortices, the rotor wake and the adjacent blading at the exit plane of the first turbine stage is of prime interest and analyzed in detail. The results indicate that the unsteady secondary flows are primarily dominated by the rotor hub passage vortex and the shed secondary flow field from the upstream stator blade row. The analysis of the results revealed a roll-up mechanism of the rotor wake layer into the rotor indigenous passage vortex close to the hub endwall. This interesting mechanism is described in a flow schematic within this paper. In a second measurement campaign the first stator blade row is clocked by half a blade pitch relative to the second stator in order to shift the relative position of both stator indigenous secondary flow fields. The comparison of the time-resolved data for both clocking cases showed a surprising result. The steady flow profiles for both cases are nearly identical. The analysis of the probe pressure signal indicates a high level of unsteadiness that is due to the periodic occurrence of the shed first stator secondary flow field.

Incidence Angle and Pitch–Chord Effects on Secondary Flows Downstream of a Turbine Cascade

1993 ◽  
Vol 115 (3) ◽  
pp. 383-391 ◽  
Author(s):  
A. Perdichizzi ◽  
V. Dossena
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Incidence Angle ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Oil Flow ◽  
Secondary Velocity ◽  
Secondary Flow Field

This paper describes the results of an experimental investigation of the three-dimensional flow downstream of a linear turbine cascade at off-design conditions. The tests have been carried out for five incidence angles from −60 to +35 deg, and for three pitch-chord ratios: s/c = 0.58, 0.73, 0.87. Data include blade pressure distributions, oil flow visualizations, and pressure probe measurements. The secondary flow field has been obtained by traversing a miniature five-hole probe in a plane located at 50 percent of an axial chord downstream of the trailing edge. The distributions of local energy loss coefficients, together with vorticity and secondary velocity plots, show in detail how much the secondary flow field is modified both by incidence and by cascade solidity variations. The level of secondary vorticity and the intensity of the crossflow at the endwall have been found to be strictly related to the blade loading occurring in the blade entrance region. Heavy changes occur in the spanwise distributions of the pitch-averaged loss and of the deviation angle, when incidence or pitch–chord ratio is varied.

Simulation of Three-Dimensional Viscous Flow Within a Multistage Turbine

1990 ◽  
Vol 112 (3) ◽  
pp. 370-376 ◽  
Author(s):  
J. J. Adamczyk ◽  
M. L. Celestina ◽  
T. A. Beach ◽  
M. Barnett
Keyword(s):  
Aspect Ratio ◽  
Flow Field ◽  
Three Dimensional ◽  
Equation System ◽  
Aerodynamic Performance ◽  
Experimental Measurements ◽  
Low Aspect Ratio ◽  
Blade Row ◽  
Multistage Turbine ◽  
Secondary Flow Field

This work outlines a procedure for simulating the flow field within multistage turbomachinery, which includes the effects of unsteadiness, compressibility, and viscosity. The associated modeling equations are the average passage equation system, which governs the time-averaged flow field within a typical passage of a blade row embedded within a multistage configuration. The results from a simulation of a low aspect ratio stage and one-half turbine will be presented and compared with experimental measurements. It will be shown that the secondary flow field generated by the rotor causes the aerodynamic performance of the downstream vane to be significantly different from that of an isolated blade row.

Three-Dimensional Time-Resolved Flow Field in the First and Last Turbine Stage of a Heavy Duty Gas Turbine: Part I — Secondary Flow Field

2000 ◽  
Author(s):  
Martin von Hoyningen-Huene ◽  
Wolfram Frank ◽  
Alexander R. Jung
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Companion Paper ◽  
Heavy Duty ◽  
Turbine Stage ◽  
Time Resolved ◽  
Heavy Duty Gas Turbine ◽  
Secondary Flow Field

Unsteady stator-rotor interaction in gas turbines has been investigated both experimentally and numerically for some years now. Even though the numerical methods are still in development, today they have reached a certain degree of maturity allowing industry to focus on the results of the computations and their impact on turbine design, rather than on a further improvement of the methods themselves. The key to increase efficiency in modern gas turbines is a better understanding and subsequent optimization of the loss-generation mechanisms. A major part of these are the secondary losses. To this end, this paper presents the time-resolved secondary flow field for the two test cases computed, viz the first and the last turbine stage of a modern heavy duty gas turbine. A companion paper referring to the same computations focuses on the unsteady pressure fluctuations on vanes and blades. The investigations have been performed with the flow solver ITSM3D which allows for efficient calculations that simulate the real blade count ratio. This is a prerequisite to simulate the unsteady phenomena in frequency and amplitude properly.

Sign in / Sign up

Export Citation Format

Share Document