Waviness Amplitude Reduction in EHL Line Contacts Under Rolling-Sliding

1998 ◽  
Vol 120 (4) ◽  
pp. 705-709 ◽  
Author(s):  
A. A. Lubrecht ◽  
D. Graille ◽  
C. H. Venner ◽  
J. A. Greenwood
Keyword(s):  
Film Thickness ◽  
Financial Constraints ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
The Other ◽  
Foreseeable Future ◽  
Lubricant Film Thickness ◽  
Detailed Understanding ◽  
Line Contacts ◽  
Do So

Due to technological pressures the lubricant film thickness in EHD contacts has decreased over the years and will continue to do so for the foreseeable future. On the other hand, financial constraints cause the surface roughness in these contacts to decrease very slowly, or might even cause an increase. As a result, the ratio of film thickness to composite roughness will continue to decrease. The question that remains to be answered is to what extent this decrease will affect the contact performance. A third development makes this question even more acute, the request of increased reliability. As a consequence, the problem of the detailed understanding of the elastohydrodynamic lubrication with rough surfaces is as urgent as ever. Recent work has shown that the features inside the contact deform, and that the level of deformation is a function of the wavelength of the feature and the contact operating conditions, including slip. This last aspect of the problem, which has not been addressed previously, forms the central topic of the current paper. Instead of studying the deformation of a real roughness profile, the deformation of its sinusoidal Fourier components is investigated.

scholarly journals Maximizing the Lubricant Film Thickness Between a Rigid Microtextured and a Smooth Deformable Surface in Relative Motion, Using a Soft Elasto-Hydrodynamic Lubrication Model

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Quentin Allen ◽  
Bart Raeymaekers
Keyword(s):  
Film Thickness ◽  
Hydrodynamic Lubrication ◽  
Elastohydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Lubricant Film ◽  
Operating Conditions ◽  
Design Parameters ◽  
Lubricant Film Thickness ◽  
Texture Density ◽  
Film Lubrication

Abstract We design a pattern of microtexture features to increase hydrodynamic pressure and lubricant film thickness in a hard-on-soft bearing. We use a soft elastohydrodynamic lubrication model to evaluate the effect of microtexture design parameters and bearing operating conditions on the resulting lubricant film thickness and find that the maximum lubricant film thickness occurs with a texture density between 10% and 40% and texture aspect ratio between 1% and 14%, depending on the bearing load and operating conditions. We show that these results are similar to those of hydrodynamic textured bearing problems because the lubricant film thickness is almost independent of the stiffness of the bearing surfaces in full-film lubrication.

Elastohydrodynamic lubrication of coated finite line contacts

2017 ◽  
Vol 232 (9) ◽  
pp. 1077-1092 ◽  
Author(s):  
Shivam S Alakhramsing ◽  
Matthijn B de Rooij ◽  
Dirk J Schipper ◽  
Mark van Drogen
Keyword(s):  
Mechanical Properties ◽  
Film Thickness ◽  
Surface Profile ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
Maximum Pressure ◽  
Lubrication Performance ◽  
Line Contacts ◽  
Finite Line ◽  
Axial Surface

In this work, a finite element-based model is presented that simulates elastohydrodynamic lubrication in coated finite line contacts. Using this model, the film thickness and pressure distributions, between a straight roller with rounded edges on a plate, were analyzed. The model was successfully validated against representative results reported in literature. Parameter studies were conducted to study the influence of varying operating conditions, axial surface profile parameters and coating mechanical properties on the overall elastohydrodynamic lubrication behavior of the contact. It was found that in contrast with typical elastohydrodynamic lubrication behavior, the maximum pressure and minimum film thickness, which are located at the rear of the contact, are largely influenced by variations in load. Results also reveal that axial surface profile parameters and coating mechanical properties may act as amplifiers to the effect of load on pressure and film thickness distribution and can thus, if smartly chosen, significantly enhance lubrication performance.

The Minimum Film Thickness in Lubricated Line Contacts during a Reversal of Entrainment—Piezoviscous Behaviour

1992 ◽  
Vol 206 (6) ◽  
pp. 417-424 ◽  
Author(s):  
C J Hooke
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Lubrication Theory ◽  
Rate Of Change ◽  
Operating Conditions ◽  
Entrainment Velocity ◽  
Residual Film ◽  
Minimum Film Thickness ◽  
Line Contacts ◽  
Important Exception

In many line contacts the operating conditions, such as load, entrainment velocity and contact radii, vary with time. Generally, the results from standard elastohydrodynamic lubrication theory, derived for constant conditions, can be used to obtain a quasi-steady prediction of film thickness that is sufficiently accurate for design purposes. An important exception to this is where the entrainment direction changes because, under those conditions, the quasi-steady approach predicts that there will be no clearance between the surfaces while in practice a residual film will persist. A previous paper showed that the minimum film thickness during entrainment reversal depends primarily on the rate of change of entrainment velocity. Limit expressions for the minimum clearance in the four regimes of lubrication were obtained. The present paper is part of a programme to develop a minimum film thickness chart for entrainment reversal and deals with the transition between the rigid-piezoviscous and the elastic-piezoviscous regimes.

Film formation in EHL contacts with oil-impregnated sintered materials

2018 ◽  
Vol 70 (4) ◽  
pp. 612-619 ◽  
Author(s):  
Milan Omasta ◽  
Martin Ebner ◽  
Petr Šperka ◽  
Thomas Lohner ◽  
Ivan Krupka ◽  
...  
Keyword(s):  
Film Thickness ◽  
Sintered Material ◽  
Film Formation ◽  
Elastohydrodynamic Lubrication ◽  
Lubricant Film ◽  
Operating Conditions ◽  
Lubricant Film Thickness ◽  
Content Type ◽  
Film Forming ◽  
Highly Loaded

PurposeThe purpose of this study is to investigate lubricant film-forming capability of oil-impregnated sintered material in highly loaded non-conformal contacts. This self-lubrication mechanism is well described in lightly loaded conformal contacts such as journal bearings; however, only a little has been published about the application to highly loaded contacts under elastohydrodynamic lubrication regime (EHL).Design/methodology/approachThin film colorimetric interferometry is used to describe the effect of different operating conditions on lubricant film formation in line contacts.FindingsUnder fully flooded conditions, the effect of porous structure can be mainly traced back to the different elastic properties. When the contact is lubricated only by oil bleeding from the oil-impregnated sintered material, starvation is likely to occur. It is indicated that lubricant film thickness is mainly governed by oil bleeding capacity. The relationship between oil starvation parameters corresponds well with classic starved EHL theory.Practical implicationsTo show practical, relevant limitations of the considered self-lubrication system, time tests were conducted. The findings indicate that EHL contact with oil-impregnated sintered material may provide about 40 per cent of fully flooded film thickness.Originality/valueFor the first time, the paper presents results on the EHL film-forming capability of oil-impregnated sintered material by measuring the lubricant film thickness directly. The present paper identifies the phenomena involved, which is necessary for the understanding of the behavior of this complex tribological system.

A Starved Mixed Elastohydrodynamic Lubrication Model for the Prediction of Lubrication Performance, Friction and Flash Temperature With Arbitrary Entrainment Angle

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Wei Pu ◽  
Dong Zhu ◽  
Jiaxu Wang
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Industrial Applications ◽  
Operating Conditions ◽  
Flash Temperature ◽  
Machined Surface ◽  
Lubrication Performance ◽  
Wide Range ◽  
Starved Lubrication

In this study, a modified mixed lubrication model is developed with consideration of machined surface roughness, arbitrary entraining velocity angle, starvation, and cavitation. Model validation is executed by means of comparison between the obtained numerical results and the available starved elastohydrodynamic lubrication (EHL) data found from some previous studies. A comprehensive analysis for the effect of inlet oil supply condition on starvation and cavitation, mixed EHL characteristics, friction and flash temperature in elliptical contacts is conducted in a wide range of operating conditions. In addition, the influence of roughness orientation on film thickness and friction is discussed under different starved lubrication conditions. Obtained results reveal that inlet starvation leads to an obvious reduction of average film thickness and an increase in interasperity cavitation area due to surface roughness, which results in significant increment of asperity contacts, friction, and flash temperature. Besides, the effect of entrainment angle on film thickness will be weakened if the two surfaces operate under starved lubrication condition. Furthermore, the results show that the transverse roughness may yield thicker EHL films and lower friction than the isotropic and longitudinal if starvation is taken into account. Therefore, the starved mixed EHL model can be considered as a useful engineering tool for industrial applications.

Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and Shear-Thinning Effects

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Punit Kumar ◽  
M. M. Khonsari
Keyword(s):  
Free Volume ◽  
Elastohydrodynamic Lubrication ◽  
Approximate Equation ◽  
Shear Thinning ◽  
Operating Conditions ◽  
Limiting Shear Stress ◽  
Line Contacts ◽  
Traction Coefficient ◽  
Simulation Results ◽  
Volume Equation

This paper investigates the traction behavior in heavily loaded thermo-elastohydrodynamic lubrication (EHL) line contacts using the Doolittle free-volume equation, which closely represents the experimental viscosity-pressure-temperature relationship and has recently gained attention in the field of EHL, along with Tait’s equation of state for compressibility. The well-established Carreau viscosity model has been used to describe the simple shear-thinning encountered in EHL. The simulation results have been used to develop an approximate equation for traction coefficient as a function of operating conditions and material properties. This equation successfully captures the decreasing trend with increasing slide to roll ratio caused by the thermal effect. The traction-slip characteristics are expected to be influenced by the limiting shear stress and pressure dependence of lubricant thermal conductivity, which need to be incorporated in the future.

Thermal Non-Newtonian Elastohydrodynamic Lubrication of Line Contacts Under Simple Sliding Conditions

1992 ◽  
Vol 114 (2) ◽  
pp. 317-327 ◽  
Author(s):  
Shao Wang ◽  
T. F. Conry ◽  
C. Cusano
Keyword(s):  
Film Thickness ◽  
Surface Temperature ◽  
Thermal Effects ◽  
Elastohydrodynamic Lubrication ◽  
Reduction Factor ◽  
Simple Formulation ◽  
Maximum Surface ◽  
Line Contacts ◽  
Traction Coefficient ◽  
Maximum Surface Temperature

A computationally simple formulation for the stationary surface temperature is developed to examine the thermal non-Newtonian EHD problem for line contacts under simple sliding conditions. Numerical results obtained are used to develop a formula for a thermal and non-Newtonian (Ree-Eyring) film thickness reduction factor. Results for the maximum surface temperature and traction coefficient are also presented. The thermal effects on film thickness and traction are found to be more pronounced for simple sliding than for combined sliding and rolling conditions.

Roughness Amplitude Reduction Under Non-Newtonian EHL Conditions

2005 ◽  
Author(s):  
A. D. Chapkov ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Pressure Fluctuations ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
Quantitative Prediction ◽  
Point Contacts ◽  
Minimum Film Thickness ◽  
Roughness Amplitude ◽  
Average Film Thickness ◽  
Ehl Contact

The influence of surface roughness on the performance of bearings and gears operating under ElastoHydrodynamic Lubrication (EHL) conditions has become increasingly important over the last decade, as the average film thickness decreased due to various influences. Surface features can reduce the minimum film thickness and thus increase the wear. They can also increase the temperature and the pressure fluctuations, which directly affects the component life. In order to describe the roughness geometry inside an EHL contact, the amplitude reduction of harmonic waviness has been studied over the last ten years. This theory currently allows a quantitative prediction of the waviness amplitude and includes the influence of wavelength and contact operating conditions. However, the model assumes a Newtonian behaviour of the lubricant. The current paper makes a first contribution to the extension of the roughness amplitude reduction for EHL point contacts including non-Newtonian effects.

The Effects of Surface Irregularities on the Elastohydrodynamic Lubrication of Sliding Line Contacts. Part II—Wavy Surfaces

1984 ◽  
Vol 106 (1) ◽  
pp. 113-119 ◽  
Author(s):  
P. R. Goglia ◽  
C. Cusano ◽  
T. F. Conry
Keyword(s):  
Shear Stress ◽  
Film Thickness ◽  
Smooth Surface ◽  
Wave Amplitude ◽  
Elastohydrodynamic Lubrication ◽  
Wavy Surface ◽  
Line Contacts ◽  
Surface Irregularities ◽  
Wavy Surfaces ◽  
Octahedral Shear Stress

The micro-EHD effects caused by wavy surfaces have been analytically investigated. The investigation includes the effects of phase, wavelength, and wave amplitude on film thickness, pressure distribution and subsurface octahedral shear stress field. The presence of a wavy surface with a given wavelength produces pressure oscillations of the same wavelength. With increasing wave amplitude and decreasing wavelength, the micro-EHD action increases. This results in a maximum value of the octahedral shear stress which is greater in magnitude and closer to the surface than the corresponding smooth surface case. The slope of the wavy surface in the inlet region determines whether the average film thickness is smaller or larger than the smooth surface value.

The Highways Agency Approach to Traffic Management

1997 ◽  
Vol 50 (1) ◽  
pp. 5-13
Author(s):  
Mel G. Quinn
Keyword(s):  
Traffic Management ◽  
Environmental Issues ◽  
Road Transport ◽  
The Other ◽  
Foreseeable Future ◽  
Vital Part ◽  
Road Capacity ◽  
Road Space ◽  
The Uk ◽  
Do So

Road transport plays a vital part in the UK economy and will continue to do so for the foreseeable future. However, the environmental issues surrounding transport are also of growing concern to the nation, with roads seen as a key element in the environmental debate. These two issues are in conflict, with one pointing to the need for greater road capacity to accommodate more vehicles while the other suggests a limit on road space and fewer vehicles. The Highways Agency has a responsibility to help resolve this dilemma and is doing so by placing increased emphasis on making more efficient use of existing roads.

Sign in / Sign up

Export Citation Format

Share Document