Application of Large Eddy Simulation to Flow Past a Circular Cylinder

1997 ◽  
Vol 119 (4) ◽  
pp. 219-225 ◽  
Author(s):  
X. Lu ◽  
C. Dalton ◽  
J. Zhang
Keyword(s):  
Circular Cylinder ◽  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Scale Model ◽  
Step Method ◽  
Fractional Step Method ◽  
Eddy Simulation ◽  
Large Eddy

A steady approach flow around a circular cylinder is investigated by using a large eddy simulation (LES) with the Smagorinsky subgrid-scale model. A second-order accurate in time fractional-step method and a combined finite-difference/spectral approximation are employed to solve the filtered three-dimensional incompressible Navier-Stokes equations. To demonstrate the viability and accuracy of the method, we present results at Reynolds numbers of 100, 3 × 103, 2 × 104, and 4.42 × 104. At Re = 100, the physical flow is two-dimensional and the calculation is done without use of the LES method. For the higher values of Re, the flow in the wake is three-dimensional and turbulent and the LES method is necessary to describe the flow accurately. Calculated values of lift and drag coefficients and Strouhal number are in good agreement with the experimentally determined values at all of the Reynolds numbers for which calculation was done.

Application of Large Eddy Simulation to an Oscillating Flow Past a Circular Cylinder

1997 ◽  
Vol 119 (3) ◽  
pp. 519-525 ◽  
Author(s):  
Xiyun Lu ◽  
Charles Dalton ◽  
Jianfeng Zhang
Keyword(s):  
Circular Cylinder ◽  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Scale Model ◽  
Oscillating Flows ◽  
Step Method ◽  
Fractional Step Method ◽  
Eddy Simulation ◽  
Large Eddy

Three-dimensional sinusoidally oscillating flows around a circular cylinder are investigated by using a viscous flow method (VFM) and a large eddy simulation (LES). A second-order accurate in time fractional step method and a combined finite-difference/spectral approximation are employed to solve the filtered incompressible Navier-Stokes equations. To demonstrate the viability and accuracy of the method, we calculate two cases of steady approach, flows at Reynolds numbers Re = 100 using VFM and Re = 104 using LES. For sinusoidally oscillating flows at β = 1035, the flow is 2D for KC< 0.5, 3D for 0.5 < KC < 2, and turbulent for KC > 2. For KC = 0.5, 0.8 and 1, the flow is calculated using VFM. For KC = 2, 3, 4, 5, 8 and 10, we have simulated the flow using LES with the Smagorinsky subgrid scale model. The drag and inertia coefficients are calculated from the in-line force acting on the cylinder and are in very good agreement with experimental data.

Prediction of Unsteady Loading on a Circular Cylinder in High Reynolds Number Flows Using Large Eddy Simulation

2005 ◽  
Author(s):  
Sung-Eun Kim ◽  
L. Srinivasa Mohan
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Turbulent Viscosity ◽  
Reynolds Numbers ◽  
Unstructured Meshes ◽  
Navier Stokes ◽  
Step Method ◽  
Fractional Step Method ◽  
Eddy Simulation ◽  
Large Eddy

Large eddy simulations were carried out for the flow around a hydrodynamically smooth, fixed circular cylinder at two Reynolds numbers, one at a subcritical Reynolds number (Re = 1.4 × 105) and the other at a supercritical Reynolds number (Re = 1.0 × 106). The computations were made using a parallelized finite-volume Navier-Stokes solver based on a multidimensional linear reconstruction scheme that allows use of unstructured meshes. Central differencing was used for discretization of both convection and diffusion terms. Time-advancement scheme, based on an implicit, non-iterative fractional-step method, was adopted in conjunction with a three-level, backward second-order temporal discretization. Subgrid-scale turbulent viscosity was modeled by a dynamic Smagorinsky model adapted to arbitrary unstructured meshes with the aid of a test-filter applicable to arbitrary unstructured meshes. The present LES results closely reproduced the flow features observed in experiments at both Reynolds numbers. The time-averaged mean drag coefficient, root-mean-square force coefficients and the frequency content of fluctuating forces (vortex-shedding frequency) are predicted with a commendable accuracy.

scholarly journals EFFECT OF THE SPANWISE DISCRETISATION ON TURBULENT FLOW PAST A CIRCULAR CYLINDER

2021 ◽  
Vol 158 (A1) ◽  
Author(s):  
S Kim ◽  
P A Wilson ◽  
Z Chen
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Flow Field ◽  
Large Eddy Simulation ◽  
Turbulent Flow ◽  
Three Dimensional ◽  
Scale Model ◽  
Spatial Density ◽  
Eddy Simulation ◽  
Large Eddy

The effect of the spanwise discretisation on numerical calculations of the turbulent flow around a circular cylinder is systematically assessed at a subcritical Reynolds number of 10000 in the frame of three-dimensional large-eddy simulation. The eddy-viscosity k-equation subgrid scale model is implemented to evaluate unsteady turbulent flow field. Large-eddy simulation is known to be a reliable method to resolve such a challenging flow field, however, the high computational efforts restrict to low Reynolds number flow or two-dimensional calculations. Therefore, minimum spatial density in the spanwise direction or cylinder axis direction needs to be carefully evaluated in order to reduce high computational resources. In the present study, the influence of the spanwise resolutions to satisfactorily represent three- dimensional complex flow features is discussed in detail and minimum spatial density for high Reynolds flow is suggested.

Large Eddy Simulation of Flow Past Circular Cylinder Based on the Least Square Meshless Method

2013 ◽  
Vol 394 ◽  
pp. 128-133
Author(s):  
Yuan Ding Wang ◽  
Jun Jie Tan ◽  
Xiao Wei Cai ◽  
Deng Feng Ren
Keyword(s):  
Circular Cylinder ◽  
Large Eddy Simulation ◽  
Meshless Method ◽  
Stokes Equations ◽  
Least Square ◽  
Scale Model ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Large Eddy

Large Eddy Simulation (LES) based on the least square meshless method was proposed in the present paper to simulate the classical turbulent flow around a stationary 2D circular cylinder. The subgrid scale model of Smagorinsky-Lily was employed to close the Navier-Stokes equations filtered by Favre filter. The Reynolds number is 3900 which means that the flow is subcritical and the wake is fully turbulent but the cylinder boundary is still laminar. Results obtained in this paper were evaluated by comparison with published experimental results and other numerical results. The results obtained in the present work show better agreement with the experimental values than other two-dimensional LES results .

Large Eddy Simulation of Cross Flow in Pipe Junction

2018 ◽  
Author(s):  
Jiajun Chen ◽  
Yue Sun ◽  
Hang Zhang ◽  
Dakui Feng ◽  
Zhiguo Zhang
Keyword(s):  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cross Flow ◽  
Exciting Force ◽  
Navier Stokes ◽  
Pipe Network ◽  
Eddy Simulation ◽  
Large Eddy

Mixing in pipe junctions can play an important role in exciting force and distribution of flow in pipe network. This paper investigated the cross pipe junction and proposed an improved plan, Y-shaped pipe junction. The numerical study of a three-dimensional pipe junction was performed for calculation and improved understanding of flow feature in pipe. The filtered Navier–Stokes equations were used to perform the large-eddy simulation of the unsteady incompressible flow in pipe. From the analysis of these results, it clearly appears that the vortex strength and velocity non-uniformity of centerline, can be reduced by Y-shaped junction. The Y-shaped junction not only has better flow characteristic, but also reduces head loss and exciting force. The results of the three-dimensional improvement analysis of junction can be used in the design of pipe network for industry.

Large Eddy Simulations of a Hydrocyclone

2002 ◽  
Author(s):  
Francisco Jose´ de Souza ◽  
Aristeu Silveira Neto
Keyword(s):  
Turbulence Models ◽  
Fluid Flows ◽  
Scale Model ◽  
Staggered Grid ◽  
Subgrid Scale ◽  
Step Method ◽  
Fractional Step Method ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Subgrid Scale Modeling

Subgrid-scale modeling, which characterizes Large Eddy Simulation (LES), has been used to predict the behavior of a water-fed hydrocyclone operating without an air core. The governing equations were solved by a fractional step method on a staggered grid. The Smagorinsky subgrid-scale model was employed to account for turbulent effects. Numerical results actually capture the main features of the flow pattern and agree reasonably well with experiments, suggesting that LES represents an interesting alternative to classical turbulence models when applied to the numerical solution of fluid flows within hydrocyclones.

Large Eddy Simulation of Flow around a Cylinder at Re=3900 Using a CFD Code

2011 ◽  
Vol 94-96 ◽  
pp. 1707-1710 ◽  
Author(s):  
Yao Zhen Li
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Scale Model ◽  
Subgrid Scale ◽  
Flow Around A Cylinder ◽  
Cpu Time ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Subgrid Scale Model ◽  
Better Than

Flow over circular cylinder at Reynolds number 3900 is studied numerically using the technique of Large Eddy Simulation .As a result, strong three-dimensional characteristics are revealed in flow around a cylinder at Re=3900. As spanwise and streamwise mesh refinement is done respectively, result improves similarly. But the CPU time consumed is too much when refinement meshes are used. Also the simulation result with Smagorinsky subgrid-scale model is investigated to be better than subgrid-scale k model.

Three-dimensional study of separated flow over a square cylinder by large eddy simulation

2005 ◽  
Vol 219 (3) ◽  
pp. 225-234 ◽  
Author(s):  
M Farhadi ◽  
M Rahnama
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Separated Flow ◽  
Reynolds Numbers ◽  
Square Cylinder ◽  
Mean Flow ◽  
Central Difference ◽  
Eddy Simulation ◽  
Flow Parameters ◽  
Large Eddy

Large eddy simulation of flow over a square cylinder in a channel is performed at Reynolds numbers of 22 000 and 21 400. The selective structure function (SSF) modelling of the subgrid-scale stress terms is used and the convective terms are discretized using quadratic upstream interpolation for convective kinematics (QUICK) and central difference (CD) schemes. A series of time-averaged velocities, turbulent stresses, and some global flow parameters such as lift and drag coefficients and their fluctuations are computed and compared with experimental data. The suitability of SSF model has been shown by comparing the computed mean flow velocities and turbulent quantities with experiments. Results show negligible variation in the flow parameters for the two Reynolds numbers used in the present computations. It was observed that both QUICK and CD schemes are capable of obtaining results close to those of the experiments with some minor differences.

Sign in / Sign up

Export Citation Format

Share Document