Dynamics and Performance of a Harmonically Excited Vertical Impact Damper

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Sanjiv Ramachandran ◽  
George Lesieutre
Keyword(s):  
Loss Factor ◽  
Vertical Direction ◽  
Theoretical Models ◽  
Coefficient Of Restitution ◽  
Numerical Continuation ◽  
Particle Impact ◽  
Impact Damper ◽  
High Loss ◽  
Wide Range ◽  
And Performance

Particle impact dampers (PIDs) have been shown to be effective in vibration damping. However, our understanding of such dampers is still limited, based on the theoretical models existing today. Predicting the performance of the PID is an important problem, which needs to be investigated more thoroughly. This research seeks to understand the dynamics of a PID as well as those parameters which govern its behavior. The system investigated is a particle impact damper with a ceiling, under the influence of gravity. The base is harmonically excited in the vertical direction. A two-dimensional discrete map is obtained, wherein the variables at one impact uniquely dictate the variables at the next impact. This map is solved using a numerical continuation procedure. Periodic impact motions and “irregular” motions are observed. The effects of various parameters such as the gap clearance, coefficient of restitution, and the base acceleration are analyzed. The dependence of the effective damping loss factor on these parameters is also studied. The loss factor results indicate peak damping for certain combinations of parameters. These combinations of parameters correspond to a region in parameter space where two-impacts-per-cycle motions are observed over a wide range of nondimensional base accelerations. The value of the nondimensional acceleration at which the onset of two-impacts-per-cycle solutions occurs depends on the nondimensional gap clearance and the coefficient of restitution. The range of nondimensional gap clearances over which two-impacts-per-cycle solutions are observed increases as the coefficient of restitution increases. In the regime of two-impacts-per-cycle solutions, the value of nondimensional base acceleration corresponding to onset of these solutions initially decreases and then increases with increasing nondimensional gap clearance. As the two-impacts-per-cycle solutions are associated with high loss factors that are relatively insensitive to changing conditions, they are of great interest to the designer.

Experimental study of passive vibration suppression using absorber with spherical ball impact damper

2016 ◽  
Vol 231 (17) ◽  
pp. 3193-3201 ◽  
Author(s):  
Riadh Chaari ◽  
Fathi Djemal ◽  
Fakher Chaari ◽  
Mohamed Slim Abbes ◽  
Mohamed Haddar
Keyword(s):  
Vibration Suppression ◽  
Industrial Applications ◽  
Design Parameters ◽  
Particle Impact ◽  
Ball Impact ◽  
Impact Damper ◽  
Ball Size ◽  
Wide Range ◽  
The Impact ◽  
Impact Damping

Impact dampers are efficient in many industrial applications with a wide range of frequencies. An experimental analysis of the impact damping of spherical balls is investigated to simplify the particle impact damping design and improve the vibration suppression. The objective of the study is to analyze some of the design parameters of impact damper using spherical balls. The experimental investigation consists to test the effect of the ball size for each mass level, the number of balls for each size level and different exciting force levels on vibrations of the main structure. The parametric study provided useful information to understand and optimize Particle Impact Damping design.

Models for Materials Damping, Loss Factor, and Coefficient of Restitution

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Hany A. Sherif ◽  
Fahad. A. Almufadi
Keyword(s):  
Loss Factor ◽  
Polymeric Materials ◽  
Theoretical Models ◽  
Coefficient Of Restitution ◽  
Complex Model ◽  
Damping Coefficient ◽  
Damping Factor ◽  
Simple Method ◽  
Adopted Model ◽  
The Impact

Common parameters between metallic and polymeric materials are the coefficient of restitution, the damping coefficient, and loss factor. Although the relationship between the coefficient of restitution and the loss factor is quite direct, their dependence on the damping coefficient is not so simple and mainly affected by the adopted model used to describe the material response under impact. In the present study, Kelvin–Voigt linear model and Hunt–Crossley complex model are analyzed to describe how the coefficient of restitution depends on the viscous damping coefficient of impact. The correlation between the theoretical models and the experimental data is also shown. A simple method to predict the impact damping factor of both polymeric and metallic materials from the measured temporal signal of the impact force is demonstrated.

The Development and Performance of an Ambulance Stretcher Suspension

1986 ◽  
Vol 200 (4) ◽  
pp. 249-257 ◽  
Author(s):  
D R Leyshon ◽  
C W Stammers
Keyword(s):  
Medical Condition ◽  
Subjective Evaluation ◽  
Low Frequency ◽  
Vertical Direction ◽  
Vertical Vibration ◽  
Ride Height ◽  
Exposure Limit ◽  
Ambulance Transport ◽  
Wide Range ◽  
And Performance

The deterioration of the medical condition of stretchered patients during ambulance transport is discussed. The dominant vibration is generally low frequency (below 10 Hz) and in the vertical direction. Assessment of the sensitivity of supine patients to front-to-back vibration is referred to. Methods of alleviating the vibration experienced by stretchered patients are discussed and particular types of stretcher suspension described. This suspension has a constant natural frequency of vertical oscillations over a wide range of patient mass. A stretcher ride height (above the ambulance floor) independent of patient mass is achieved. The stretcher suspension was tested over four types o surface (one ofl-highway), using a commercial vehicle having a chassis similar to that of a commonly used ambulance. Vibration of the vehicle floor and of the stretcher in both the vertical and the pitch senses was measured using accelerometers. Transmissibility of the stretcher suspension, the stretcher frame and the stretcher mattress was obtained. The vertical vibration level (averaged over the four types of surface) experienced by the patient is compared with vibration tolerance levels for supine patients. Vibration inputs are closest in magnitude to the vibration exposure limit in the range 1.5–4 Hz. The transmissibility of the suspension in this range is between −7 and −9 dB. Subjective evaluation of the suspension has been favourable.

Analysis of organic removal rates in the aerated submerged fixed film process

1998 ◽  
Vol 38 (8-9) ◽  
pp. 213-221 ◽  
Author(s):  
Mohamed F. Hamoda ◽  
Ibrahim A. Al-Ghusain
Keyword(s):  
Pilot Plant ◽  
Removal Rate ◽  
Domestic Wastewater ◽  
Removal Rates ◽  
Hydraulic Loading ◽  
Organic Removal ◽  
Wide Range ◽  
Fixed Film ◽  
Cod Removal Rate ◽  
And Performance

Performance data from a pilot-plant employing the four-stage aerated submerged fixed film (ASFF) process treating domestic wastewater were analyzed to examine the organic removal rates. The process has shown high BOD removal efficiencies (> 90%) over a wide range of hydraulic loading rates (0.04 to 0.68 m3/m2·d). It could also cope with high hydraulic and organic loadings with minimal loss in efficiency due to the large amount of immobilized biomass attained. The organic (BOD and COD) removal rate was influenced by the hydraulic loadings applied, but organic removal rates of up to 104 kg BOD/ m2·d were obtained at a hydraulic loading rate of 0.68 m3/m2·d. A Semi-empirical model for the bio-oxidation of organics in the ASFF process has been formulated and rate constants were calculated based on statistical analysis of pilot-plant data. The relationships obtained are very useful for analyzing the design and performance of the ASFF process and a variety of attached growth processes.

scholarly journals A modular microfluidic system based on a multilayered configuration to generate large-scale perfusable microvascular networks

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Tao Yue ◽  
Da Zhao ◽  
Duc T. T. Phan ◽  
Xiaolin Wang ◽  
Joshua Jonghyun Park ◽  
...  
Keyword(s):  
Large Scale ◽  
Circulatory System ◽  
Vertical Direction ◽  
Microfluidic System ◽  
Vital Role ◽  
Microvascular Networks ◽  
Biological Studies ◽  
Wide Range ◽  
High Flexibility

AbstractThe vascular network of the circulatory system plays a vital role in maintaining homeostasis in the human body. In this paper, a novel modular microfluidic system with a vertical two-layered configuration is developed to generate large-scale perfused microvascular networks in vitro. The two-layer polydimethylsiloxane (PDMS) configuration allows the tissue chambers and medium channels not only to be designed and fabricated independently but also to be aligned and bonded accordingly. This method can produce a modular microfluidic system that has high flexibility and scalability to design an integrated platform with multiple perfused vascularized tissues with high densities. The medium channel was designed with a rhombic shape and fabricated to be semiclosed to form a capillary burst valve in the vertical direction, serving as the interface between the medium channels and tissue chambers. Angiogenesis and anastomosis at the vertical interface were successfully achieved by using different combinations of tissue chambers and medium channels. Various large-scale microvascular networks were generated and quantified in terms of vessel length and density. Minimal leakage of the perfused 70-kDa FITC-dextran confirmed the lumenization of the microvascular networks and the formation of tight vertical interconnections between the microvascular networks and medium channels in different structural layers. This platform enables the culturing of interconnected, large-scale perfused vascularized tissue networks with high density and scalability for a wide range of multiorgan-on-a-chip applications, including basic biological studies and drug screening.

scholarly journals Fabrication and Compressive Behavior of a Micro-Lattice Composite by High Resolution DLP Stereolithography

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 785
Author(s):  
Chow Shing Shin ◽  
Yu Chia Chang
Keyword(s):  
High Resolution ◽  
Lattice Structure ◽  
Low Cost ◽  
Hierarchical Structures ◽  
Dip Coating ◽  
Unit Cell ◽  
Digital Light Processing ◽  
Unit Cell Size ◽  
Wide Range ◽  
And Performance

Lattice structures are superior to stochastic foams in mechanical properties and are finding increasing applications. Their properties can be tailored in a wide range through adjusting the design and dimensions of the unit cell, changing the constituent materials as well as forming into hierarchical structures. In order to achieve more levels of hierarchy, the dimensions of the fundamental lattice have to be small enough. Although lattice size of several microns can be fabricated using the two-photon polymerization technique, sophisticated and costly equipment is required. To balance cost and performance, a low-cost high resolution micro-stereolithographic system has been developed in this work based on a commercial digital light processing (DLP) projector. Unit cell lengths as small as 100 μm have been successfully fabricated. Decreasing the unit cell size from 150 to 100 μm increased the compressive stiffness by 26%. Different pretreatments to facilitate the electroless plating of nickel on the lattice structure have been attempted. A pretreatment of dip coating in a graphene suspension is the most successful and increased the strength and stiffness by 5.3 and 3.6 times, respectively. Even a very light and incomplete nickel plating in the interior has increase the structural stiffness and strength by more than twofold.

BSAS Ethical Policy British Society of Animal Science Ethical guidelines for research in animal science

2005 ◽  
Vol 2005 ◽  
pp. 247-253 ◽  
Author(s):  
S. Jarvis ◽  
J.E.L. Day ◽  
B. Reed
Keyword(s):  
Ethical Issues ◽  
Science Research ◽  
British Society ◽  
Ethical Guidelines ◽  
Animal Science ◽  
Ethical Implications ◽  
Ethical Policy ◽  
Physical Environments ◽  
Wide Range ◽  
And Performance

Animal science research is important in relation to our understanding of animals, their function and performance, and their relationships with their social and physical environments. Animal science research covers a wide range of disciplines and so can lead to the use of a variety of experimental techniques on animals for many different purposes. This has the potential to lead to a multitude of diverse ethical issues. Members of the British Society of Animal Science and authors of papers submitted to the Society for publication come from countries around the world and therefore are subject to differences in legislative requirements and recommendations regarding animal experimentation. These legal requirements, along with the ethical implications of the research must be fully considered before any experimental work is undertaken.

scholarly journals CFD Study of Nozzle Configurations for Ultra High Bypass Engines

1993 ◽  
Author(s):  
H. Zimmermann ◽  
R. Gumucio ◽  
K. Katheder ◽  
A. Jula
Keyword(s):  
Engine Performance ◽  
Operating Conditions ◽  
Aerodynamic Design ◽  
Thrust Coefficient ◽  
Optimum Range ◽  
Installation Effects ◽  
Wide Range ◽  
And Performance ◽  
Aircraft Aerodynamics ◽  
Bypass Ratio

Performance and aerodynamic aspects of ultra-high bypass ratio ducted engines have been investigated with an emphasis on nozzle aerodynamics. The interference with aircraft aerodynamics could not be covered. Numerical methods were used for aerodynamic investigations of geometrically different aft end configurations for bypass ratios between 12 and 18, this is the optimum range for long missions which will be important for future civil engine applications. Results are presented for a wide range of operating conditions and effects on engine performance are discussed. The limitations for higher bypass ratios than 12 to 18 do not come from nozzle aerodynamics but from installation effects. It is shown that using CFD and performance calculations an improved aerodynamic design can be achieved. Based on existing correlations, for thrust and mass-flow, or using aerodynamic tailoring by CFD and including performance investigations, it is possible to increase the thrust coefficient up to 1%.

Design, implementation, and evaluation of an XG-PON module for the ns-3 network simulator

SIMULATION ◽  
2017 ◽  
Vol 93 (5) ◽  
pp. 409-426 ◽  
Author(s):  
Jerome A Arokkiam ◽  
Pedro Alvarez ◽  
Xiuchao Wu ◽  
Kenneth N Brown ◽  
Cormac J Sreenan ◽  
...  
Keyword(s):  
Optical Network ◽  
Future Internet ◽  
Access Networks ◽  
Passive Optical Network ◽  
Network Simulator ◽  
Optical Access Networks ◽  
Research Topics ◽  
Extensive Evaluation ◽  
Wide Range ◽  
And Performance

10-gigabit-capable Passive Optical Network (XG-PON), one of the latest standards of optical access networks, is regarded as one of the key technologies for future Internet access networks. This paper presents the design and evaluation of our XG-PON module for the ns-3 network simulator. This module is designed and implemented with the aim to provide a standards-compliant, configurable, and extensible module that can simulate XG-PON with reasonable speed and support a wide range of research topics. These include analyzing and improving the performance of XG-PON, studying the interactions between XG-PON and the upper-layer protocols, and investigating its integration with various wireless networks. In this paper, we discuss its design principles, describe the implementation details, and present an extensive evaluation on both functionality and performance.

scholarly journals Use of simulation model for measurement of MilkRun system performance

2019 ◽  
Vol 9 (1) ◽  
pp. 600-605 ◽  
Author(s):  
Gabriel Fedorko ◽  
Martin Vasil ◽  
Michaela Bartosova
Keyword(s):  
Simulation Model ◽  
Production Systems ◽  
Operational Performance ◽  
Transport Systems ◽  
Indirect Methods ◽  
Operational Characteristics ◽  
Wide Range ◽  
Effective Operation ◽  
And Performance ◽  
Plant Simulation

AbstractIntra-plant transport systems within their operation directly impact on the performance of production systems. For their effective operation, it is, therefore, necessary to realize evaluation of operational performance and effectivity. For the realization of this type of evaluation, in addition to a wide range of sensors that can be difficult for installation and operation, we can also use indirect methods that are equally able to provide reliable operational characteristics. Indirect analytical methods are presented above all by the approach which is based on the use of simulation methods. The method of computer simulation provides a wide range of options for the evaluation of efficiency and performance. The paper describes the use of a simulation model created in the program Tecnomatix Plant Simulation for analyzing the supply of production workplaces within the MilkRun system.

Sign in / Sign up

Export Citation Format

Share Document