Heat Transfer in Discretely Heated Side-Vented Compact Enclosures by Combined Conduction, Natural Convection, and Radiation

1999 ◽  
Vol 121 (4) ◽  
pp. 1002-1010 ◽  
Author(s):  
E. Yu ◽  
Y. K. Joshi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Radiative Heating ◽  
Computational Domain ◽  
Flow Recirculation ◽  
Discrete Heat Source ◽  
Rayleigh Numbers

A three-dimensional investigation of combined conduction, natural convection, and radiation in a side-vented compact enclosure is carried out. The focus of the study is on the enhancement of overall heat transfer through the opening, and the roles of the various modes in achieving it. A discrete heat source, flush-mounted centrally on a vertical substrate, is placed in the enclosure with a single rectangular opening on the opposite vertical wall. Steady-state computations are carried out for Rayleigh numbers, Ra, at 2.6 × 106 and 2.0 × 107. The results show that radiation plays a significant role in the overall heat transfer, and the radiative transport is even more pronounced for lower Ra. It is found that natural convection is weakened by radiation, however, contrary to the existing studies on top vented enclosures, the overall heat transfer is enhanced when radiation is included in the computations. Flow recirculation by radiative heating of enclosure walls is predicted, and is also observed experimentally. Heat spreading in the substrate is found to effect both convection and radiation. The numerical solutions on an extended computational domain are found in good agreement with the experimental data, when the conjugate effects are accounted for.

Three Dimensional Numerical Simulation of the Natural Convection in an Annulus With an Internal Slotted Cylinder

2011 ◽  
Author(s):  
Mo Yang ◽  
Jin Wang ◽  
Kun Zhang ◽  
Ling Li ◽  
Yuwen Zhang
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Dimensional Model ◽  
Heat Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Rayleigh Numbers

Detailed numerical analysis is presented for three-dimensional natural convection heat transfer in annulus with an internal concentric slotted cylinder. The internal slotted cylinder and the outer annulus are maintained at uniform but different temperatures. Governing equations are discretized using control volume technique based on staggered grid formulation and solved using SIMPLE algorithm with QUICK scheme. Flow and heat transfer characteristics are investigated for a Rayleigh number range of 10 to 106 while Prandtl number (Pr) is taken to be 0.7. The results indicate, at Rayleigh numbers below 105, the system shows two dimensional flow and heat transfer characteristics. On the other hand, the flow and heat transfer shows three dimensional characteristics while for Rayleigh numbers greater than 5×105. Comparison with experimental results indicated that the numerical solutions by three dimensional model can obtain more accuracy than the numerical solutions by two dimensional model. Besides, Numerical results show that the average equivalent conductivity coefficient of natural convection heat transfer of this problem can be enhanced by as much as 30% while relative slot width is more than 0.1.

Natural Convection in a Partitioned Cubic Enclosure

1992 ◽  
Vol 114 (2) ◽  
pp. 410-417 ◽  
Author(s):  
K. C. Karki ◽  
P. S. Sathyamurthy ◽  
S. V. Patankar
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Flow And Heat Transfer ◽  
Dimensional Simulation ◽  
Oriented Parallel ◽  
Rayleigh Numbers

Numerical solutions are obtained for fluid flow and heat transfer in a cubic enclosure with a vertical adiabatic partition. The two zones of the enclosure are connected by a single rectangular opening. The partition is oriented parallel to the isothermal sidewalls, one of which is heated and the other cooled while the remaining walls are adiabatic. Results have been presented for air for the Rayleigh numbers in the range 104−107. The width of the opening is held fixed while the height, relative to the enclosure height, is varied from 0.25 to 0.75. The effects of various parameters on the flow structure and heat transfer are investigated. The results of the three-dimensional simulation have also been compared with those for the corresponding two-dimensional configurations.

Effect of Periodic Imposed Heat Flux on Three-Dimensional Natural Convection in a Partially Heated Cubical Enclosure

2016 ◽  
Vol 831 ◽  
pp. 83-91
Author(s):  
Lahoucine Belarche ◽  
Btissam Abourida
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Study ◽  
Control Volume ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Maximum Temperature ◽  
Cubical Enclosure ◽  
Simplec Algorithm ◽  
Volume Method

The three-dimensional numerical study of natural convection in a cubical enclosure, discretely heated, was carried out in this study. Two heating square sections, similar to the integrated electronic components, are placed on the vertical wall of the enclosure. The imposed heating fluxes vary sinusoidally with time, in phase and in opposition of phase. The temperature of the opposite vertical wall is maintained at a cold uniform temperature and the other walls are adiabatic. The governing equations are solved using Control volume method by SIMPLEC algorithm. The sections dimension ε = D / H and the Rayleigh number Ra were fixed respectively at 0,35 and 106. The average heat transfer and the maximum temperature on the active portions will be examined for a given set of the governing parameters, namely the amplitude of the variable temperatures a and their period τp. The obtained results show significant changes in terms of heat transfer, by proper choice of the heating mode and the governing parameters.

Laminar Natural Convection in a Discretely Heated Cavity: II—Comparisons of Experimental and Theoretical Results

1995 ◽  
Vol 117 (4) ◽  
pp. 910-917 ◽  
Author(s):  
T. J. Heindel ◽  
F. P. Incropera ◽  
S. Ramadhyani
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Companion Paper ◽  
Nusselt Numbers ◽  
Numerical Predictions ◽  
Number Flow ◽  
Experimental Geometry

Three-dimensional numerical predictions and experimental data have been obtained for natural convection from a 3 × 3 array of discrete heat sources flush-mounted on one vertical wall of a rectangular cavity and cooled by the opposing wall. Predictions performed in a companion paper (Heindel et al., 1995a) revealed that three-dimensional edge effects are significant and that, with increasing Rayleigh number, flow and heat transfer become more uniform across each heater face. The three-dimensional predictions are in excellent agreement with the data of this study, whereas a two-dimensional model of the experimental geometry underpredicts average heat transfer by as much as 20 percent. Experimental row-averaged Nusselt numbers are well correlated with a Rayleigh number exponent of 0.25 for RaLz ≲ 1.2 × 108.

Visualization and Prediction of Natural Convection of Water Near Its Density Maximum in a Tall Rectangular Enclosure at High Rayleigh Numbers

2000 ◽  
Vol 123 (1) ◽  
pp. 84-95 ◽  
Author(s):  
C. J. Ho ◽  
F. J. Tu
Keyword(s):  
Natural Convection ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Temperature Fields ◽  
Convection Flow ◽  
Oscillatory Convection ◽  
Uniform Temperature ◽  
Density Maximum ◽  
Rectangular Enclosure ◽  
Rayleigh Numbers

An experimental and numerical investigation is presented concerning the natural convection of water near its maximum-density in a differentially heated rectangular enclosure at high Rayleigh numbers, in which an oscillatory convection regime may arise. The water in a tall enclosure of Ay=8 is initially at rest and at a uniform temperature below 4°C and then the temperature of the hot vertical wall is suddenly raised and kept at a uniform temperature above 4°C. The cold vertical wall is maintained at a constant uniform temperature equal to that of the initial temperature of the water. The top and bottom walls are insulated. Using thermally sensitive liquid crystal particles as tracers, flow and temperature fields of a temporally oscillatory convection was documented experimentally for RaW=3.454×105 with the density inversion parameter θm=0.5. The oscillatory convection features a cyclic sequence of onset at the lower quarter-height region, growth, and decay of the upward-drifting secondary vortices within counter-rotating bicellular flows in the enclosure. Two and three-dimensional numerical simulations corresponding to the visualization experiments are undertaken. Comparison of experimental with numerical results reveals that two-dimensional numerical simulation captures the main features of the observed convection flow.

Numerical Simulation of Natural Convection Flow in a Cube With a Horizontal Heated Strip

2008 ◽  
Author(s):  
Esam M. Alawadhi
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Nusselt Number ◽  
High Temperature ◽  
Natural Convection ◽  
Vertical Wall ◽  
Convection Flow ◽  
Front Wall ◽  
Natural Convection Flow ◽  
Rayleigh Numbers

Natural convection flow in a cube with a heated strip is solved numerically. The heated strip is attached horizontally to the front wall and maintained at high temperature, while the entire opposite wall is maintained at low temperature. The heated strip simulates an array of electronic chips The Rayleigh numbers of 104, 105, and 106 are considered in the analysis and the heated strip is horizontally attached to the wall. The results indicate that the heat transfer strongly depends on the position of the heated strip. The maximum Nusselt number can be achieved if the heater is placed at the lower half of the vertical wall. Increasing the Rayleigh number significantly promotes heat transfer in the enclosure. Flow streamlines and temperature contours are presented, and the results are validated against published works.

Effects of the Heat Transfer at the Side Walls on Natural Convection in Cavities

1990 ◽  
Vol 112 (2) ◽  
pp. 370-378 ◽  
Author(s):  
Y. Le Peutrec ◽  
G. Lauriat
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Thermal Conductance ◽  
Fluid Flows ◽  
Heat Losses ◽  
Transfer Rates ◽  
Side Walls ◽  
The Difference

Numerical solutions are obtained for fluid flows and heat transfer rates for three-dimensional natural convection in rectangular enclosures. The effects of heat losses at the conducting side walls are investigated. The problem is related to the design of cavities suitable for visualizing the flow field. The computations cover Rayleigh numbers from 103 to 107 and the thermal conductance of side walls ranging from adiabatic to commonly used glazed walls. The effect of the difference between the ambient temperature and the average temperature of the two isothermal walls is discussed for both air and water-filled enclosures. The results reported in the paper allow quantitative evaluations of the effects of heat losses to the surroundings, which are important considerations in the design of a test cell.

Three-Dimensional Laminar Natural Convection in an Inclined Air Slot With Hexagonal Honeycomb Core

1991 ◽  
Vol 113 (4) ◽  
pp. 906-911 ◽  
Author(s):  
Y. Asako ◽  
H. Nakamura ◽  
Z. Chen ◽  
M. Faghri
Keyword(s):  
Natural Convection ◽  
Numerical Solutions ◽  
Transfer Problem ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Temperature Fields ◽  
Honeycomb Core ◽  
Inclination Angles ◽  
Side Walls ◽  
Rayleigh Numbers

Numerical solutions are obtained for a three-dimensional natural convection heat transfer problem in an inclined air slot with a hexagonal honeycomb core. The air slot is assumed to be long and wide such that the velocity and temperature fields repeat themselves in successive enclosures. The numerical methodology is based on an algebraic coordinate transformation technique, which maps the complex cross section onto a rectangle, coupled with a calculation procedure for fully elliptic three-dimensional flows. The calculations are performed for Rayleigh numbers in the range of 103 to 105, inclination angles in the range of −90 to 80 deg, Prandtl number of 0.7, and for five values of the aspect ratio. Three types of thermal boundary condition for the honeycomb side walls are considered. The average Nusselt number results are compared with those for a rectangular two-dimensional enclosure.

Natural Convection Ventilation in Fully Open Enclosures

2010 ◽  
Author(s):  
Morteza Nateghi ◽  
Steven W. Armfield
Keyword(s):  
Natural Convection ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Full Range ◽  
Vertical Wall ◽  
Staggered Grid ◽  
Finite Volume Scheme ◽  
Full Development ◽  
Prandtl Numbers ◽  
Rayleigh Numbers

The present study is concerned with natural convection ventilation in a two dimensional fully open enclosure (cavity) with thermally stratified ambient for both transient and steady-state flow. The left hand vertical wall of the enclosure is heated and the right hand facing boundary is open, with the top and bottom boundaries insulated. The numerical solutions will be obtained by solving the Navier-Stokes equations and the temperature transport equation on a non-staggered grid using an unsteady second-order finite-volume scheme with a pressure correction equation used to simultaneously provide an update for the pressure field and enforce the divergence free condition. Results will be presented for Rayleigh numbers in the range 1 × 105 to 1 × 1010 with Prandtl numbers in the range 0.2 to 1.0. It will be shown that the flow transits from steady to unsteady, at full development, with increasing Rayleigh number for Pr <= 1.0, as observed for the similar closed enclosure flow. For higher Prandtl numbers the flow is steady at full development for the full range of Rayleigh numbers considered, again as for the similar fully closed enclosure. Streamline and temperature contour plots will be presented to illustrate the basic flow behaviours and to demonstrate the effect of the Prandtl number.

Eddie Leonardi Memorial Lecture: “Natural Convection From Earth to Space”

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Victoria Timchenko
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Solutions ◽  
Numerical Study ◽  
Three Dimensional ◽  
Experimental Investigations ◽  
Memorial Lecture ◽  
Numerical Studies ◽  
Fluid Properties ◽  
Microgravity Conditions

This lecture is dedicated to the memory of Professor Eddie Leonardi, formerly International Heat Transfer Conference (IHTC-13) Secretary, who tragically died at an early age on December 14, 2008. Eddie Leonardi had a large range of research interests: he worked in both computational fluid dynamics/heat transfer and refrigeration and air-conditioning for over 25 years. However starting from his Ph.D. ‘A numerical study of the effects of fluid properties on natural convection’ awarded in 1984, one of his main passions has been natural convection and therefore the focus of this lecture will be on what Eddie Leonardi has achieved in numerical and experimental investigations of laminar natural convective flows. A number of examples will be presented which illustrate important difficulties of numerical calculations and experimental comparisons. Eddie Leonardi demonstrated that variable properties have important effects and significant differences occur when different fluids are used, so that dimensionless formulation is not appropriate when dealing with flows of fluids with significant changes in transport properties. Difficulties in comparing numerical solutions with either numerically generated data or experimental results will be discussed with reference to two-dimensional natural convection and three-dimensional Rayleigh–Bénard convection. For a number of years Eddie Leonardi was involved in a joint US-French-Australian research program—the MEPHISTO experiment on crystal growth—and studied the effects of convection on solidification and melting under microgravity conditions. Some results of this research will be described. Finally, some results of experimental and numerical studies of natural convection for building integrated photovoltaic (BIPV) applications in which Eddie Leonardi had been working in the last few years will be also presented.

Sign in / Sign up

Export Citation Format

Share Document