Nonaxisymmetric Convection in Stationary Gas Tungsten Arc Weld Pools

1997 ◽  
Vol 119 (1) ◽  
pp. 164-172 ◽  
Author(s):  
Y. Joshi ◽  
P. Dutta ◽  
P. E. Schupp ◽  
D. Espinosa
Keyword(s):  
Computational Study ◽  
Numerical Models ◽  
Three Dimensional ◽  
Pulsed Laser ◽  
Surface Flow ◽  
Rotational Flow ◽  
Visualization System ◽  
Gas Tungsten Arc ◽  
Laser Visualization ◽  
Weld Pools

Observations of surface flow patterns of steel and aluminum GTAW pools have been made using a pulsed laser visualization system. The weld pool convection is found to be three-dimensional, with the azimuthal circulation depending on the location of the clamp with respect to the torch. Oscillation of steel pools and undulating motion in aluminum weld pools are also observed even with steady process parameters. Current axisymmetric numerical models are unable to explain such phenomena. A three-dimensional computational study is carried out in this study to explain the rotational flow in aluminum weld pools.

Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool

1996 ◽  
Vol 118 (4) ◽  
pp. 589-596 ◽  
Author(s):  
R. Kovacevic ◽  
Z. N. Cao ◽  
Y. M. Zhang
Keyword(s):  
Fluid Flow ◽  
Weld Pool ◽  
Numerical Models ◽  
Three Dimensional ◽  
Welding Current ◽  
Gta Welding ◽  
Welding Parameters ◽  
Geometrical Shape ◽  
Arc Length ◽  
Weld Pools

A three-dimensional numerical model is developed to describe the fluid flow and heat transfer in weld pools. Both full penetration and free deformation of the top and bottom weld pool surfaces are considered. Temperature distribution and fluid flow field are obtained. In order to analyze the influence of welding parameters on the geometrical appearance of weld pools, a normalized model is developed to characterize the geometrical appearance of weld pools. It is found that welding current can significantly affect the geometrical shape. When welding current increases, the curvature of the pool boundary at the trailing end increases. The effect of the welding speed on the geometrical appearance is slight, although its influence on the pool size is great. In the interest range of arc length (from 1 mm to 4 mm), the arc length can affect both the size and the shape of the weld pool. However, compared with the welding current and speed, its influences are much weaker. GTA welding experiments are performed to verify the validity of the numerical models. The appearance of weld pools was obtained by using machine vision and a high-shutter speed camera. It is found that the calculated results have a good agreement with the experimental ones.

Three-Dimensional Effects in Supersonic and Transonic Compressor Rotors: An Experimental and Computational Study

1982 ◽  
Author(s):  
K. D. Broichhausen ◽  
H. E. Gallus
Keyword(s):  
Experimental Data ◽  
Computational Study ◽  
Three Dimensional ◽  
Experimental Results ◽  
Computation Method ◽  
Rotational Flow ◽  
Transonic Compressor ◽  
Dimensional Effects ◽  
Flow Through ◽  
Data Result

A computation method for the three-dimensional rotational flow through transonic and supersonic rotors is described and discussed by means of a comparison with experimental results. The computation treats subsonic and supersonic flows with different algorithms. The compression shocks are calculated as real three-dimensional discontinuities on the basis of the Rankine-Hugoniot-equations. The experimental data result from measurements in transonic and supersonic compressor rotors. A comparison of the data shows to what extent these three-dimensional effects are covered by the described theory.

Three-Dimensional Computational Study of Natural Convection in a Non-Uniformly Heated Vertical Open-Ended Channel

2014 ◽  
Author(s):  
Oxana A. Tkachenko ◽  
Svetlana A. Tkachenko ◽  
Victoria Timchenko ◽  
John A. Reizes ◽  
Guan Heng Yeoh ◽  
...  
Keyword(s):  
Natural Convection ◽  
Computational Study ◽  
Three Dimensional

Wake Flow of Single and Multiple Yawed Cylinders

2004 ◽  
Vol 126 (5) ◽  
pp. 861-870 ◽  
Author(s):  
A. Thakur ◽  
X. Liu ◽  
J. S. Marshall
Keyword(s):  
Computational Study ◽  
Three Dimensional ◽  
Side Wall ◽  
Wake Flow ◽  
Upstream Region ◽  
Two Dimensional ◽  
Cylinder Wake ◽  
Dimensional Approximation ◽  
The Face ◽  
Drag And Lift

An experimental and computational study is performed of the wake flow behind a single yawed cylinder and a pair of parallel yawed cylinders placed in tandem. The experiments are performed for a yawed cylinder and a pair of yawed cylinders towed in a tank. Laser-induced fluorescence is used for flow visualization and particle-image velocimetry is used for quantitative velocity and vorticity measurement. Computations are performed using a second-order accurate block-structured finite-volume method with periodic boundary conditions along the cylinder axis. Results are applied to assess the applicability of a quasi-two-dimensional approximation, which assumes that the flow field is the same for any slice of the flow over the cylinder cross section. For a single cylinder, it is found that the cylinder wake vortices approach a quasi-two-dimensional state away from the cylinder upstream end for all cases examined (in which the cylinder yaw angle covers the range 0⩽ϕ⩽60°). Within the upstream region, the vortex orientation is found to be influenced by the tank side-wall boundary condition relative to the cylinder. For the case of two parallel yawed cylinders, vortices shed from the upstream cylinder are found to remain nearly quasi-two-dimensional as they are advected back and reach within about a cylinder diameter from the face of the downstream cylinder. As the vortices advect closer to the cylinder, the vortex cores become highly deformed and wrap around the downstream cylinder face. Three-dimensional perturbations of the upstream vortices are amplified as the vortices impact upon the downstream cylinder, such that during the final stages of vortex impact the quasi-two-dimensional nature of the flow breaks down and the vorticity field for the impacting vortices acquire significant three-dimensional perturbations. Quasi-two-dimensional and fully three-dimensional computational results are compared to assess the accuracy of the quasi-two-dimensional approximation in prediction of drag and lift coefficients of the cylinders.

scholarly journals Experimental and Numerical Investigation of 3D Dam-Break Wave Propagation in an Enclosed Domain with Dry and Wet Bottom

2021 ◽  
Vol 11 (12) ◽  
pp. 5638
Author(s):  
Selahattin Kocaman ◽  
Stefania Evangelista ◽  
Hasan Guzel ◽  
Kaan Dal ◽  
Ada Yilmaz ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Numerical Models ◽  
Three Dimensional ◽  
Dam Break ◽  
Dam Failure ◽  
Navier Stokes ◽  
Negative Wave ◽  
Through Flow ◽  
Instantaneous Removal ◽  
Surface Patterns

Dam-break flood waves represent a severe threat to people and properties located in downstream regions. Although dam failure has been among the main subjects investigated in academia, little effort has been made toward investigating wave propagation under the influence of tailwater depth. This work presents three-dimensional (3D) numerical simulations of laboratory experiments of dam-breaks with tailwater performed at the Laboratory of Hydraulics of Iskenderun Technical University, Turkey. The dam-break wave was generated by the instantaneous removal of a sluice gate positioned at the center of a transversal wall forming the reservoir. Specifically, in order to understand the influence of tailwater level on wave propagation, three tests were conducted under the conditions of dry and wet downstream bottom with two different tailwater depths, respectively. The present research analyzes the propagation of the positive and negative wave originated by the dam-break, as well as the wave reflection against the channel’s downstream closed boundary. Digital image processing was used to track water surface patterns, and ultrasonic sensors were positioned at five different locations along the channel in order to obtain water stage hydrographs. Laboratory measurements were compared against the numerical results obtained through FLOW-3D commercial software, solving the 3D Reynolds-Averaged Navier–Stokes (RANS) with the k-ε turbulence model for closure, and Shallow Water Equations (SWEs). The comparison achieved a reasonable agreement with both numerical models, although the RANS showed in general, as expected, a better performance.

scholarly journals Crystal Structure and Computational Study on Methyl-3-Aminothiophene-2-Carboxylate

Crystals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 19 ◽  
Author(s):  
Yaping Tao ◽  
Ligang Han ◽  
Andong Sun ◽  
Kexi Sun ◽  
Qian Zhang ◽  
...  
Keyword(s):  
Crystal Packing ◽  
Computational Study ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Dispersion Energy ◽  
Monoclinic Crystal ◽  
Hydrogen Bond Interactions ◽  
Calculation Results ◽  
Reduced Density Gradient ◽  
Reduced Density

Methyl-3-aminothiophene-2-carboxylate (matc) is a key intermediate in organic synthesis, medicine, dyes, and pesticides. Single crystal X-ray diffraction analysis reveals that matc crystallizes in the monoclinic crystal system P21/c space group. Three matc molecules in the symmetric unit are crystallographically different and further linked through the N–H⋯O and N–H⋯N hydrogen bond interactions along with weak C–H⋯S and C–H⋯Cg interactions, which is verified by the three-dimensional Hirshfeld surface, two-dimensional fingerprint plot, and reduced density gradient (RDG) analysis. The interaction energies within crystal packing are visualized through dispersion, electrostatic, and total energies using three-dimensional energy-framework analyses. The dispersion energy dominates in crystal packing. To better understand the properties of matc, electrostatic potential (ESP) and frontier molecular orbitals (FMO) were also calculated and discussed. Experimental and calculation results suggested that amino and carboxyl groups can participate in various inter- and intra-interactions.

Numerical Modeling of Heat Transfer and Pressure Losses for Uncooled Gas Turbine Blade Tip: Effect of Tip Clearance and Tip Geometry

2007 ◽  
Author(s):  
Lamyaa A. El-Gabry
Keyword(s):  
Heat Transfer ◽  
Mach Number ◽  
Gas Turbine ◽  
Computational Study ◽  
Numerical Models ◽  
Pressure Ratio ◽  
Tip Clearance ◽  
Pressure Losses ◽  
Blade Tip ◽  
Exit Mach Number

A computational study has been performed to predict the heat transfer distribution on the blade tip surface for a representative gas turbine first stage blade. CFD predictions of blade tip heat transfer are compared to test measurements taken in a linear cascade, when available. The blade geometry has an inlet Mach number of 0.3 and an exit Mach number of 0.75, pressure ratio of 1.5, exit Reynolds number based on axial chord of 2.57×106, and total turning of 110 deg. Three blade tip configurations were considered; they are flat tip, a full perimeter squealer, and an offset squealer where the rim is offset to the interior of the tip perimeter. These three tip geometries were modeled at three tip clearances of 1.25, 2.0, and 2.75% of blade span. The tip heat transfer results of the numerical models agree fairly well with the data and are comparable to other CFD predictions in the open literature.

Ice-Phase Precipitation

2017 ◽  
Vol 58 ◽  
pp. 6.1-6.36 ◽  
Author(s):  
I. Gultepe ◽  
A. J. Heymsfield ◽  
P. R. Field ◽  
D. Axisa
Keyword(s):  
Collection Efficiency ◽  
Numerical Models ◽  
Mass Density ◽  
Three Dimensional ◽  
Phase Precipitation ◽  
Microphysical Parameters ◽  
Mass Size ◽  
Ice Water ◽  
Ice Phase

AbstractIce-phase precipitation occurs at Earth’s surface and may include various types of pristine crystals, rimed crystals, freezing droplets, secondary crystals, aggregates, graupel, hail, or combinations of any of these. Formation of ice-phase precipitation is directly related to environmental and cloud meteorological parameters that include available moisture, temperature, and three-dimensional wind speed and turbulence, as well as processes related to nucleation, cooling rate, and microphysics. Cloud microphysical parameters in the numerical models are resolved based on various processes such as nucleation, mixing, collision and coalescence, accretion, riming, secondary ice particle generation, turbulence, and cooling processes. These processes are usually parameterized based on assumed particle size distributions and ice crystal microphysical parameters such as mass, size, and number and mass density. Microphysical algorithms in the numerical models are developed based on their need for applications. Observations of ice-phase precipitation are performed using in situ and remote sensing platforms, including radars and satellite-based systems. Because of the low density of snow particles with small ice water content, their measurements and predictions at the surface can include large uncertainties. Wind and turbulence affecting collection efficiency of the sensors, calibration issues, and sensitivity of ground-based in situ observations of snow are important challenges to assessing the snow precipitation. This chapter’s goals are to provide an overview for accurately measuring and predicting ice-phase precipitation. The processes within and below cloud that affect falling snow, as well as the known sources of error that affect understanding and prediction of these processes, are discussed.

Sign in / Sign up

Export Citation Format

Share Document