High Pressure Test Results of a Catalytically Assisted Ceramic Combustor for a Gas Turbine

1999 ◽  
Vol 121 (3) ◽  
pp. 422-428 ◽  
Author(s):  
Y. Ozawa ◽  
Y. Tochihara ◽  
N. Mori ◽  
I. Yuri ◽  
T. Kanazawa ◽  
...  
Keyword(s):  
High Pressure ◽  
Gas Turbine ◽  
Catalytic Combustion ◽  
Ceramic Fiber ◽  
Outlet Temperature ◽  
Mechanical Shock ◽  
Test Results ◽  
Ceramic Tiles ◽  
Combustion Gas ◽  
Ceramic Liner

A catalytically assisted ceramic combustor for a gas turbine was designed to achieve low NOx emission under 5 ppm at a combustor outlet temperature over 1300°C. This combustor is composed of a burner system and a ceramic liner behind the burner system. The burner system consists of 6 catalytic combustor segments and 6 premixing nozzles, which are arranged in parallel and alternately. The ceramic liner is made up of the layer of outer metal wall, ceramic fiber, and inner ceramic tiles. Fuel flow rates for the catalysts and the premixing nozzles are controlled independently. Catalytic combustion temperature is controlled under 1000°C, premixed gas is injected from the premixing nozzles to the catalytic combustion gas and lean premixed combustion over 1300°C is carried out in the ceramic liner. This system was designed to avoid catalytic deactivation at high temperature and thermal and mechanical shock fracture of the honeycomb monolith of the catalyst. A combustor for a 10 MW class, multican type gas turbine was tested under high pressure conditions using LNG fuel. Measurements of emission, temperature, etc. were made to evaluate combustor performance under various combustion temperatures and pressures. This paper presents the design features and the test results of this combustor.

scholarly journals High Pressure Test Results of a Catalytically Assisted Ceramic Combustor for a Gas Turbine

1998 ◽  
Author(s):  
Yasushl Ozawa ◽  
Yoshihisa Tochihara ◽  
Noriyuki Mori ◽  
Isao Yuri ◽  
Takaaki Kanazawa ◽  
...  
Keyword(s):  
High Pressure ◽  
Gas Turbine ◽  
Catalytic Combustion ◽  
Ceramic Fiber ◽  
Outlet Temperature ◽  
Mechanical Shock ◽  
Test Results ◽  
Ceramic Tiles ◽  
Combustion Gas ◽  
Ceramic Liner

A catalytically assisted ceramic combustor for a gas turbine was designed to achieve low NOx emission under 5ppm at a combustor outlet temperature over 1300°C. This combustor is composed of a burner system and a ceramic liner behind the burner system. The burner system consists of 6 catalytic combustor segments and 6 premixing nozzles, which are arranged in parallel and alternately. The ceramic liner is made up of the layer of outer metal wall, ceramic fiber and inner ceramic tiles. Fuel flow rates for the catalysts and the premixing nozzles are controlled independently. Catalytic combustion temperature is controlled under 1000°C, premixed gas is injected from the premixing nozzles to the catalytic combustion gas and lean premixed combustion over 1300°C is carried out in the ceramic liner. This system was designed to avoid catalytic deactivation at high temperature and thermal and mechanical shock fracture of the honeycomb monolith of the catalyst. A combustor for a 10MW class, multi-can type gas turbine was tested under high pressure conditions using LNG fuel. Measurements of emission, temperature, etc. were made to evaluate combustor performance under various combustion temperatures and pressures. This paper presents the design features and the test results of this combustor.

High Pressure Test Results of a Catalytic Combustor for Gas Turbine

1998 ◽  
Vol 120 (3) ◽  
pp. 509-513 ◽  
Author(s):  
T. Fujii ◽  
Y. Ozawa ◽  
S. Kikumoto ◽  
M. Sato ◽  
Y. Yuasa ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Catalytic Combustion ◽  
Combustion Process ◽  
Combined Cycle ◽  
Nox Emission ◽  
Test Results ◽  
Catalytic Combustor

Recently, the use of gas turbine systems, such as combined cycle and cogeneration systems, has gradually increased in the world. But even when a clean fuel such as LNG (liquefied natural gas) is used, thermal NOx is generated in the high temperature gas turbine combustion process. The NOx emission from gas turbines is controlled through selective catalytic reduction processes (SCR) in the Japanese electric industry. If catalytic combustion could be applied to the combustor of the gas turbine, it is expected to lower NOx emission more economically. Under such high temperature and high pressure conditions, as in the gas turbine, however, the durability of the catalyst is still insufficient. So it prevents the realization of a high temperature catalytic combustor. To overcome this difficulty, a catalytic combustor combined with premixed combustion for a 1300°C class gas turbine was developed. In this method, catalyst temperature is kept below 1000°C, and a lean premixed gas is injected into the catalytic combustion gas. As a result, the load on the catalyst is reduced and it is possible to prevent the catalyst deactivation. After a preliminary atmospheric test, the design of the combustort was modified and a high pressure combustion test was conducted. As a result, it was confirmed that NOx emission was below 10 ppm (at 16 percent O2) at a combustor outlet gas temperature of 1300°C and that the combustion efficiency was almost 100 percent. This paper presents the design features and test results of the combustor.

scholarly journals High Pressure Test Results of a Catalytic Combustor for Gas Turbine

1996 ◽  
Author(s):  
T. Fujii ◽  
Y. Ozawa ◽  
S. Kikumoto ◽  
M. Sato ◽  
Y. Yuasa ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Catalytic Combustion ◽  
Combustion Process ◽  
Combined Cycle ◽  
Nox Emission ◽  
Test Results ◽  
Catalytic Combustor

Recently, use of gas turbine systems such as combined cycle and cogeneration systems has gradually increased in the world. But even when a clean fuel such as LNG (liquefied natural gas) is used, thermal NOx is generated in the high temperature gas turbine combustion process. The NOx emission from gas turbines is controlled through selective catalytic reduction processes (SCR) in the Japanese electric industry. If catalytic combustion could be applied to the combustor of the gas turbine, it is expected to lower NOx emission more economically. Under such high temperature and high pressure conditions as in the gas turbine, however, the durability of the catalyst is still insufficient. So it prevents the realization of a high temperature catalytic combustor. To overcome this difficulty, a catalytic combustor combined with premixed combustion for a 1300°C class gas turbine was developed. In this method, catalyst temperature is kept below 1000°C and a lean premixed gas is injected into the catalytic combustion gas. As a result, the load on the catalyst is reduced and it is possible to prevent the catalyst deactivation. After a preliminary atmospheric test, the design of the combustor was modified and a high pressure combustion test was conducted. As a result, it was confirmed that NOx emission was below 10ppm (at 16% O2) at a combustor outlet gas temperature of 1300°C and that the combustion efficiency was almost 100%. This paper presents the design features and test results of the combustor.

Study on Combustor Outlet Temperature Field of Gas Turbine

2011 ◽  
Vol 138-139 ◽  
pp. 962-966 ◽  
Author(s):  
Kai Liu ◽  
Li Xu
Keyword(s):  
Experimental Study ◽  
Temperature Field ◽  
Gas Turbine ◽  
Reference Value ◽  
Test System ◽  
Outlet Temperature ◽  
Test Results ◽  
Heavy Duty ◽  
Pressure Test ◽  
Heavy Duty Gas Turbine

Experimental study on combustor outlet temperature field of heavy-duty gas turbine had been finished on high-pressure test system. Experimental results indicate: The OTDF is sensitive to diameter of dilution holes, and the RTDF is sensitive to location of dilution holes. The test results have important guiding significance and reference value to design, commission and working about the similar combustor.

A Performance Autopsy of Three Centrifugal Compressors for a Small Gas Turbine

2010 ◽  
Author(s):  
Colin Rodgers ◽  
Dan Brown
Keyword(s):  
High Pressure ◽  
Gas Turbine ◽  
Radial Flow ◽  
Pressure Ratio ◽  
Test Results ◽  
Design Features ◽  
Centrifugal Compressors ◽  
High Pressure Ratio ◽  
Flow Type ◽  
The One

Three 140mm tip diameter centrifugal compressors were designed and tested to determine the one exhibiting the best performance most suitable for eventual application to a small 60KW radial flow type gas turbine. The design features, and stage test results of these three moderately high pressure ratio impellers are presented, together with a comparison of their respective test and CFD computed performance maps.

Structural Design and High-Pressure Test of a Ceramic Combustor for 1500°C Class Industrial Gas Turbine

1997 ◽  
Vol 119 (3) ◽  
pp. 506-511 ◽  
Author(s):  
I. Yuri ◽  
T. Hisamatsu ◽  
K. Watanabe ◽  
Y. Etori
Keyword(s):  
Fracture Toughness ◽  
High Pressure ◽  
Gas Turbine ◽  
Structural Design ◽  
Metal Structure ◽  
Combustion Efficiency ◽  
Test Results ◽  
Industrial Gas Turbine ◽  
Hybrid Ceramic ◽  
Load Conditions

A ceramic combustor for a 1500°C, 20 MW class industrial gas turbine was developed and tested. This combustor has a hybrid ceramic/metal structure. To improve the durability of the combustor, the ceramic parts were made of silicon carbide (SiC), which has excellent oxidation resistance under high-temperature conditions as compared to silicon nitride (Si3N4), although the fracture toughness of SiC is lower than that of Si3N4. Structural improvements to allow the use of materials with low fracture toughness were made to the fastening structure of the ceramic parts. Also, the combustion design of the combustor was improved. Combustor tests using low-Btu gaseous fuel of a composition that simulated coal gas were carried out under high pressure. The test results demonstrated that the structural improvements were effective because the ceramic parts exhibited no damage even in the fuel cutoff tests from rated load conditions. It also indicated that the combustion efficiency was almost 100 percent even under part-load conditions.

Sign in / Sign up

Export Citation Format

Share Document