Thermodynamic Heating With Various Types of Cogeneration Plants and Heat Pumps

1995 ◽  
Vol 117 (2) ◽  
pp. 251-258 ◽  
Author(s):  
K. Stachel ◽  
H. U. Frutschi ◽  
H. Haselbacher
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Primary Energy ◽  
Heat Pumps ◽  
Combined Cycle ◽  
The Other ◽  
Environmental Damage ◽  
Site Conditions ◽  
Fuel Utilization ◽  
Heating Method

The thermodynamic heating method combines cogeneration power plants and heat pumps in order to maximize the heating energy that can be derived from a given amount of fuel. In doing this, unnecessary waste of primary energy and environmental damage can be prevented. In this paper, four cogeneration systems—combined cycle plants, steam and gas turbine power plants, and gas engines—and heat pump systems are investigated and compared with respect to fuel utilization for realistic site conditions. It is shown that the combined cycle cogeneration power plant is superior to the other three types of power plant.

Seven Years of Putnam Plant Operation: Part 1–2

1984 ◽  
Author(s):  
V. C. Tandon ◽  
D. A. Moss
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Heat Rate ◽  
Combined Cycle ◽  
High Availability ◽  
Fuel Utilization ◽  
Residual Oil ◽  
L System ◽  
Efficient Power ◽  
Plant Components

Florida Power and Light Company’s Putnam Station, one of the most efficient power plants in the FP&L system, is in a unique and enviable position from an operational viewpoint. Its operation, in the last seven years, has evolved through a triple phase fuel utilization from distillate to residual oil and finally to natural gas. This paper compares the availability/reliability of the Putnam combined cycle station and the starting reliability of the combustion turbines in each of the operating periods. A review of the data shows that high availability/reliability is not fuel selective when appropriate actions are developed and implemented to counteract the detractors. This paper also includes experience with heat rate and power degradation of various power plant components and programs implemented to restore performance.

Saving Primary Energy Consumption Through Exergy Analysis of Combine Distillation and Power Plant

2012 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
Alhassan Salami Tijani ◽  
Nazri Mohammed ◽  
Werner Witt
Keyword(s):  
Energy Consumption ◽  
Power Plant ◽  
Heat Pump ◽  
Heat Recovery ◽  
Energy Savings ◽  
Primary Energy ◽  
Heat Pumps ◽  
Saturated Steam ◽  
Distillation Unit ◽  
Primary Energy Consumption

Industrial heat pumps are heat-recovery systems that allow the temperature ofwaste-heat stream to be increased to a higher, more efficient temperature. Consequently, heat pumps can improve energy efficiency in industrial processes as well as energy savings when conventional passive-heat recovery is not possible. In this paper, possible ways of saving energy in the chemical industry are considered, the objective is to reduce the primary energy (such as coal) consumption of power plant. Particularly the thermodynamic analyses ofintegrating backpressure turbine ofa power plant with distillation units have been considered. Some practical examples such as conventional distillation unit and heat pump are used as a means of reducing primary energy consumption with tangible indications of energy savings. The heat pump distillation is operated via electrical power from the power plant. The exergy efficiency ofthe primary fuel is calculated for different operating range ofthe heat pump distillation. This is then compared with a conventional distillation unit that depends on saturated steam from a power plant as the source of energy. The results obtained show that heat pump distillation is an economic way to save energy if the temperaturedifference between the overhead and the bottom is small. Based on the result, the energy saved by the application of a heat pump distillation is improved compared to conventional distillation unit.

scholarly journals Dynamic simulation of a combined cycle for power plant flexibility enhancement

2019 ◽  
Vol 113 ◽  
pp. 01005
Author(s):  
Adrien Reveillere ◽  
Martin Longeon ◽  
Iacopo Rossi
Keyword(s):  
Power Plant ◽  
Dynamic Models ◽  
Real Life ◽  
Heat Pumps ◽  
Combined Cycle ◽  
Industrial Systems ◽  
Virtual Plant ◽  
Balance Of Plant ◽  
Real Life Data ◽  
Combined Cycles

System simulation is used in many fields to help design, control or troubleshoot various industrial systems. Within the PUMP-HEAT H2020 project, it is applied to a combined cycles power plant, with innovative layouts that include heat pumps and thermal storage to un-tap combined cycle potential flexibility through low-CAPEX balance of plant innovations. Simcenter Amesim software is used to create dynamic models of all subsystems and their interactions and validate them from real life data for various purpose. Simple models of the Gas Turbine (GT), the Steam loop, the Heat Recovery Steam Generator (HRSG), the Heat Pump and the Thermal Energy storage with Phase Change material are created for Pre-Design and concept validation and then scaled to more precise design. Control software and hardware is validated by interfacing them with detailed models of the virtual plant by Model in the Loop (MiL), Software in the Loop (SiL) and Hardware in the Loop (HiL) technologies. Unforeseen steady state and transient behaviours of the powerplant can be virtually captured, analysed, understood and solved. The purpose of this paper is to introduce the associated methodologies applied in the PUMP-HEAT H2020 project and their respective results.

scholarly journals Using adsorption chillers for utilising waste heat from power plants

2019 ◽  
Vol 23 (Suppl. 4) ◽  
pp. 1143-1151 ◽  
Author(s):  
Karol Sztekler ◽  
Wojciech Kalawa ◽  
Sebastian Stefanski ◽  
Jaroslaw Krzywanski ◽  
Karolina Grabowska ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Efficiency ◽  
Power Plant ◽  
Power Plants ◽  
Waste Heat ◽  
Primary Energy ◽  
Simulation Software ◽  
Coefficient Of Performance ◽  
Low Grade ◽  
Adsorption Chiller

At present, energy efficiency is a very important issue and it is power generation facilities, among others, that have to confront this challenge. The simultaneous production of electricity, heat and cooling, the so-called trigeneration, allows for substantial savings in the chemical energy of fuels. More efficient use of the primary energy contained in fuels translates into tangible earnings for power plants while reductions in the amounts of fuel burned, and of non-renewable resources in particular, certainly have a favorable impact on the natural environment. The main aim of the paper was to investigate the contribution of the use of adsorption chillers to improve the energy efficiency of a conventional power plant through the utilization of combined heat and power waste heat, involving the use of adsorption chillers. An adsorption chiller is an item of industrial equipment that is driven by low grade heat and intended to produce chilled water and desalinated water. Nowadays, adsorption chillers exhibit a low coefficient of performance. This type of plant is designed to increase the efficiency of the primary energy use. This objective as well as the conservation of non-renewable energy resources is becoming an increasingly important aspect of the operation of power generation facilities. As part of their project, the authors have modelled the cycle of a conventional heat power plant integrated with an adsorption chiller-based plant. Multi-variant simulation calculations were performed using IPSEpro simulation software.

scholarly journals Gerakan Kontra Pembangunan Shelter 9 Dan 10 Pltu Suralaya Merak-Banten

ijd-demos ◽  
2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Nida Urrohmah ◽  
Karin Caroline Kelly ◽  
Fitri Yuliani
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Electrical Energy ◽  
Environmental Damage ◽  
Steam Power ◽  
Steam Power Plant ◽  
Steam Power Plants ◽  
Local Residents

Electric Steam Power Plants (PLTU) need coal as fuel to produce electricity. The higher the electrical energy needed to eat, the more fuel will be used. This has happened in the construction of shelters 9 and 10 Suralaya Merak-Banten steam power plant (PLTU). This development is reaping various kinds of rejection because it causes environmental damage not only in the area around the development operation but also in the Greater Jakarta area. The rejection movement was initiated by local residents and supported by international Environmental NGOs.Pembangkit Listrik Tenaga Uap (PLTU) membutuhkan batu bara sebagai bahan bakar untuk menghasilkan energi listrik. Semakin tinggi energi listrik yang dibutuhkan makan akan semakin banyak bahan bakar yang digunakan. Hal ini terjadi pada pembangunan shelter 9 dan 10 PLTU Suralaya di pulau Jawa spesifiknya di daerah Merak-Banten. Pembangunan ini menuai berbagai macam penolakan karena mengakibatkan kerusakan lingkungan tidak hanya pada wilayah sekitar operasi pembangunan namun juga pada wilayah Jabodetabek. Gerakan penolakan diinisiasi tentunya oleh warga setempat dan didukung dengan NGO Internasional penggiat isu lingkungan. 

Thermo-Economic Assessment Under Electrical Market Uncertainties of a Combined Cycle Gas Turbine Integrated With a Flue Gas-Condensing Heat Pump

2020 ◽  
Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Heat Pump ◽  
Flue Gas ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Capital Expenditure ◽  
Combined Cycle ◽  
Gas Turbine Power Plant

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.

The Elephant in the Room–Gas Turbine Power

2010 ◽  
Vol 132 (12) ◽  
pp. 57-57
Author(s):  
Lee S. Langston
Keyword(s):  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
Power Plants ◽  
Electrical Power ◽  
Electric Power Industry ◽  
Hydrocarbon Fuel ◽  
Combined Cycle ◽  
Electrical Generator ◽  
Gas Turbine Exhaust

This article presents an overview of gas turbine combined cycle (CCGT) power plants. Modern CCGT power plants are producing electric power as high as half a gigawatt with thermal efficiencies approaching the 60% mark. In a CCGT power plant, the gas turbine is the key player, driving an electrical generator. Heat from the hot gas turbine exhaust is recovered in a heat recovery steam generator, to generate steam, which drives a steam turbine to generate more electrical power. Thus, it is a combined power plant burning one unit of fuel to supply two sources of electrical power. Most of these CCGT plants burn natural gas, which has the lowest carbon content of any other hydrocarbon fuel. Their near 60% thermal efficiencies lower fuel costs by almost half compared to other gas-fired power plants. Their installed capital cost is the lowest in the electric power industry. Moreover, environmental permits, necessary for new plant construction, are much easier to obtain for CCGT power plants.

Thermoeconomic Study of a Small Parabolic Trough Solar Plant

2010 ◽  
Author(s):  
M. D. Duran ◽  
E. A. Rinco´n ◽  
M. Sa´nchez
Keyword(s):  
Power Plant ◽  
Optimization Model ◽  
Power Plants ◽  
Optimization Problem ◽  
Pressure Level ◽  
Combined Cycle ◽  
Design Parameters ◽  
Parabolic Trough ◽  
Solar Plant ◽  
Solar Power Plants

This work describes the thermoeconomic study of an integrated combined cycle parabolic trough power plant. The parabolic trough plant will economize boiler activity, and thus the thermoeconomic optimization of the configuration of the boiler, including the parabolic trough plant, will be achieved. The objective is to obtain the optimum design parameters for the boiler and the size of the parabolic field. The proposal is to apply the methodology employed by Duran [1] and Valde´s et. al. [2], but with the inclusion of the parabolic trough plant into the optimization problem. It is important to point out that the optimization model be applied to a single pressure level configuration. For future works, it is proposed that the same model be applied to different configurations of integrated combined cycle solar power plants. As a result the optimum thermoeconomic design will be obtained for a parabolic trough plant used to economize the HRSG.

300 MW Combined-Cycle Plant With Integrated Coal Gasification

1984 ◽  
Author(s):  
Rolf H. Kehlhofer
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Gas Turbines ◽  
Power Plants ◽  
Coal Gasification ◽  
District Heating ◽  
Combined Cycle ◽  
Liquid Fuels ◽  
Combined Cycle Plant ◽  
The Individual

In the past 15 years the combined-cycle (gas/steam turbine) power plant has come into its own in the power generation market. Today, approximately 30 000 MW of power are already installed or being built as combined-cycle units. Combined-cycle plants are therefore a proven technology, showing not only impressive thermal efficiency ratings of up to 50 percent in theory, but also proving them in practice and everyday operation (1) (2). Combined-cycle installations can be used for many purposes. They range from power plants for power generation only, to cogeneration plants for district heating or combined cycles with maximum additional firing (3). The main obstacle to further expansion of the combined cycle principle is its lack of fuel flexibility. To this day, gas turbines are still limited to gaseous or liquid fuels. This paper shows a viable way to add a cheap solid fuel, coal, to the list. The plant system in question is a 2 × 150 MW combined-cycle plant of BBC Brown Boveri with integrated coal gasification plant of British Gas/Lurgi. The main point of interest is that all the individual components of the power plant described in this paper have proven their worth commercially. It is therefore not a pilot plant but a viable commercial proposition.

Model of a Combined Cycle Steam Section for Use in an On-Line Fuzzy-Based Diagnosis System

2012 ◽  
Author(s):  
Rafael Barbosa ◽  
Sandro Ferreira ◽  
Raphael Duarte ◽  
Paula Ribeiro Pinto ◽  
Marília Paula e Silva
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Computer Models ◽  
Combined Cycle ◽  
Feed Water ◽  
Diagnosis System ◽  
Power Plant Equipment ◽  
Partial Load ◽  
On Line ◽  
Good Agreement

In recent years, combined cycle power plants showed remarkable progress in the safe operation and reliability of their equipment, mostly because of the reliable control and instrumentation systems available today. However, these systems cannot detect and evaluate inconsistencies in the behaviour of equipment due to failures and avoid trips caused by catastrophic events. Computer models developed to simulate the power plant equipment are often employed in diagnosis tools in order to provide accurate healthy parameters that are compared to the field measured parameters. In this work, the computer models built for the simulation of some of the main bottoming cycle equipment of a real power plant (steam turbine, HRSG, boiler feed water pumps and condenser) are described. These models were developed through characteristics maps and constitutive equations related to the fluid path analysis, implemented in Fortran language. The results provided by the developed models for each equipment show good agreement with operational data at base and partial load in simulations that covered a good part of the load domain. Due to the good agreement between the measured parameters values and those calculated through simulation, these models are intended to be included in an on-line fuzzy-based diagnosis system.

Sign in / Sign up

Export Citation Format

Share Document