The Effect of Transverse Shear on the Postbuckling and Growth Characteristics of Delaminations in Composites

1999 ◽  
Vol 121 (4) ◽  
pp. 406-412 ◽  
Author(s):  
Catherine H. Ferrie ◽  
Izhak Sheinman ◽  
George A. Kardomateas
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Shear Deformation ◽  
Release Rate ◽  
Transverse Shear ◽  
Coupling Effect ◽  
Nonlinear Differential Equations ◽  
Kinematic Model ◽  
Initial Imperfection ◽  
Plate Length

A geometrically nonlinear formulation for the behavior of composite delaminated beams of arbitrary stacking sequence, and with the effects of transverse shear deformation included, is presented. The formulation is based on a first-order shear deformation kinematic model, which incorporates the bending-stretching coupling effect and also assumes an arbitrary initial imperfection. The nonlinear differential equations are solved by Newton’s method using a finite-difference scheme. The growth of the delamination is also studied by applying the J-integral in order to derive a formula for the energy release rate, which includes transverse shear. Results are presented which illustrate the shear effect, especially with respect to the ratio of the in-plane extensional over shear modulus and with respect to the ratio of plate length over thickness. It is seen that transverse shear can affect largely the displacement profiles, rendering the structure more compliant, and can promote growth by increasing the energy release rate, but this latter effect is moderate and mainly noticable only at the later stages in the postbuckling regime.

Calculation of total energy release rate in post-local buckling delamination of composite laminates

2016 ◽  
Vol 51 (5) ◽  
pp. 623-635 ◽  
Author(s):  
M Naghinejad ◽  
H R Ovesy
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Shear Deformation ◽  
Release Rate ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Higher Order ◽  
Buckling Load ◽  
Post Buckling ◽  
Total Energy Release Rate

In the present article, the variational energy principle is used to derive the expression for energy release rate in buckled composite laminate containing through-the-width delamination, subjected to in-plane strains. Boundary conditions are clamped at both edges. Buckling and post-buckling solutions are obtained and expressions for critical buckling load and post-buckling deflection have been developed. A through-the-width delamination model has been considered and formulations are based on higher order shear deformation theory. The effects of considering the higher order shear deformation theory on equivalent bending rigidity, buckling load, and energy release rate have been investigated. Finally, the results of current study have been compared with the results of finite element method analysis by Abaqus/CAE and those available in the literature.

Evaluation of Transverse Shear Effect on Film Delamination in Blister Test

2010 ◽  
Vol 132 (1) ◽  
Author(s):  
Wei Wang ◽  
Yong Huang ◽  
Nicole Coutris ◽  
Hongseok Noh ◽  
Peter J. Hesketh
Keyword(s):  
Film Thickness ◽  
Energy Release Rate ◽  
Energy Release ◽  
Phase Angle ◽  
Release Rate ◽  
Transverse Shear ◽  
Shear Force ◽  
Shear Effect ◽  
Blister Test ◽  
Elastic Mismatch

The transverse shear effect has been frequently ignored in determining the debonding-related energy release rate and the phase angle in the blister test, resulting in underestimated values. This study aims to study the effect of shear force on the energy release rate and phase angle prediction in the blister test. A generalized approach is proposed to predict them under the effect of shear force. The predictions show that when the ratio of the film thickness to the debonded film window radius is large (such as 0.05), the transverse shear effect cannot be ignored in determining the energy release rate and the phase angle. The study also further illustrates the importance of including the shear force contribution in estimation and how this importance depends on the film thickness to debonded radius ratio, as well as the elastic mismatch.

Calculating Energy Release Rate as a Function of Crack Length Using a Multiple-Step Crack Closure Technique in Tire Finite Element Models

2018 ◽  
Vol 46 (3) ◽  
pp. 130-152
Author(s):  
Dennis S. Kelliher
Keyword(s):  
Finite Element ◽  
Energy Release Rate ◽  
Crack Length ◽  
Energy Release ◽  
Crack Closure ◽  
Release Rate ◽  
Fatigue Behavior ◽  
Three Dimensions ◽  
Quantitative Prediction ◽  
Closure Technique

ABSTRACT When performing predictive durability analyses on tires using finite element methods, it is generally recognized that energy release rate (ERR) is the best measure by which to characterize the fatigue behavior of rubber. By addressing actual cracks in a simulation geometry, ERR provides a more appropriate durability criterion than the strain energy density (SED) of geometries without cracks. If determined as a function of crack length and loading history, and augmented with material crack growth properties, ERR allows for a quantitative prediction of fatigue life. Complications arise, however, from extra steps required to implement the calculation of ERR within the analysis process. This article presents an overview and some details of a method to perform such analyses. The method involves a preprocessing step that automates the creation of a ribbon crack within an axisymmetric-geometry finite element model at a predetermined location. After inflating and expanding to three dimensions to fully load the tire against a surface, full ribbon sections of the crack are then incrementally closed through multiple solution steps, finally achieving complete closure. A postprocessing step is developed to determine ERR as a function of crack length from this enforced crack closure technique. This includes an innovative approach to calculating ERR as the crack length approaches zero.

scholarly journals Effect of the Characteristic Size and Content of Graphene on the Crack Propagation Path of Alumina/Graphene Composite Ceramics

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 611
Author(s):  
Benshuai Chen ◽  
Guangchun Xiao ◽  
Mingdong Yi ◽  
Jingjie Zhang ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Crack Propagation ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Volume Content ◽  
Phase Interface ◽  
Average Energy ◽  
Characteristic Size ◽  
Composite Ceramics ◽  
Graphene Composite

In this paper, the Voronoimosaic model and the cohesive element method were used to simulate crack propagation in the microstructure of alumina/graphene composite ceramic tool materials. The effects of graphene characteristic size and volume content on the crack propagation behavior of microstructure model of alumina/graphene composite ceramics under different interfacial bonding strength were studied. When the phase interface is weak, the average energy release rate is the highest as the short diameter of graphene is 10–50 nm and the long diameter is 1600–2000 nm. When the phase interface is strong, the average energy release rate is the highest as the short diameter of graphene is 50–100 nm and the long diameter is 800–1200 nm. When the volume content of graphene is 0.50 vol.%, the average energy release rate reaches the maximum. When the velocity load is 0.005 m s−1, the simulation result is convergent. It is proven that the simulation results are in good agreement with the experimental phenomena.

Sign in / Sign up

Export Citation Format

Share Document