Practical Considerations in Designing Large Scale “Beam Down” Optical Systems

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
Akiba Segal ◽  
Michael Epstein
Keyword(s):  
Large Scale ◽  
Maximum Energy ◽  
Optical Systems ◽  
Energy Concentration ◽  
Design Parameters ◽  
Weizmann Institute ◽  
Detailed Design ◽  
Working Temperature ◽  
Compound Parabolic Concentrator ◽  
Current Mirrors

The “beam down” optics or “solar tower reflector” has been successfully used recently for testing in different projects at the Weizmann Institute of Science. There are currently sufficient data on this technology to evaluate its upscaling for commercial uses. The sizing of a tower reflector (TR) is directly linked to the layout of the heliostat field and the geometry of the ground secondary concentrator (compound parabolic concentrator (CPC)). It depends on its position relative to the aim point of the field, amount of spillage around it, and the allowable solar flux striking the TR. Its position influences the size of the image at the entrance plane of the ground CPC and the spillage around the CPC aperture. The spillage around the CPC is also directly related to the exit diameter of the CPC (equal to the entrance opening of the solar reactor, matching the CPC exit) and therefore linked to the input energy concentration, thermal losses, and working temperature in the reactor. Restrictions on the size of the exit of the CPC can influence the entire design of the optical system. This paper provides the correlations between the main design parameters and their sensitivity analysis. These correlations are based on edge-ray methodology, which provides a quick and sufficiently accurate means for preliminary evaluating large-scale beam down solar plants without the need for detailed design of the heliostat field and considering their errors. The size of the TR and the geometry of the CPC are correlated to the size of the reflective area of the heliostats field (and the power output). Thermal modeling of the TR has been performed, showing the maximum energy flux allowed on the reflector to avoid overheating, using natural cooling to the surrounding air. The current mirrors of the TR are limited to working temperatures of 120–130°C to achieve reasonable lifetime. This parameter must be considered when determining the TR position. A key issue discussed in this paper is the amount of spillage around the CPC entrance. To reduce the spillage losses, one needs to increase the size of the exit aperture (although there are practical limitations to this, e.g., due to the size of the reactor’s window). This, however, reduces the concentration and increases the thermal losses from the reactor and requires optimization work.

Design and Development of Hydrodynamic Lubricating System of Large-Scale Mill Oil-Film Bearing Test Rig

2010 ◽  
Vol 145 ◽  
pp. 274-277 ◽  
Author(s):  
Jian Mei Wang ◽  
Qing Xue Huang ◽  
Jian Zhao Sun ◽  
Xue Tao
Keyword(s):  
Large Scale ◽  
Design Parameters ◽  
Test Rig ◽  
Detailed Design ◽  
Oil Film ◽  
Solid Models ◽  
Critical Segment ◽  
3D Solid ◽  
Good Operation ◽  
Lubricating Mechanism

The lubricating system is the critical segment to ensure the good operation of bearing subsystem and the whole mill system. To keep pace with the advanced domestic and outdoors technologies, it is emergent to design and develop the mechatronic test rig of mill oil-film bearing. According to the detailed design parameters and design principles of lubricating system, its main modules and the lubricating mechanism are designed and implemented. The according 2D drawings and 3D solid models are successfully established. Consequently, the prototype is developed, and runs well in practical tests on mechanical parameters of mill bearing. Moreover, some further improvements are also made to better the performances of lubricating system.

scholarly journals A New Approach for Design Optimization and Parametric Analysis of Symmetric Compound Parabolic Concentrator for Photovoltaic Applications

2021 ◽  
Vol 13 (9) ◽  
pp. 4606
Author(s):  
Faisal Masood ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Javed Akhter ◽  
Mohammad Azad Alam
Keyword(s):  
Parametric Analysis ◽  
Concentration Ratio ◽  
Synergistic Effects ◽  
Geometric Optimization ◽  
Design Parameters ◽  
Imaging Device ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications ◽  
Half Angle ◽  
The Impact

A compound parabolic concentrator (CPC) is a non-imaging device generally used in PV, thermal, or PV/thermal hybrid systems for the concentration of solar radiation on the target surface. This paper presents the geometric design, statistical modeling, parametric analysis, and geometric optimization of a two-dimensional low concentration symmetric compound parabolic concentrator for potential use in building-integrated and rooftop photovoltaic applications. The CPC was initially designed for a concentration ratio of “2×” and an acceptance half-angle of 30°. A MATLAB code was developed in house to provoke the CPC reflector’s profile. The height, aperture width, and concentration ratios were computed for different acceptance half-angles and receiver widths. The interdependence of optical concentration ratio and acceptance half-angle was demonstrated for a wide span of acceptance half-angles. The impact of the truncation ratio on the geometric parameters was investigated to identify the optimum truncation position. The profile of truncated CPC for different truncation positions was compared with full CPC. A detailed statistical analysis was performed to analyze the synergistic effects of independent design parameters on the responses using the response surface modeling approach. A set of optimized design parameters was obtained by establishing specified optimization criteria. A 50% truncated CPC with an acceptance half-angle of 21.58° and receiver width of 193.98 mm resulted in optimum geometric dimensions.

On the irreversibility of internal-wave dynamics due to wave trapping by mean flow inhomogeneities. Part 1. Local analysis

1993 ◽  
Vol 251 ◽  
pp. 21-53 ◽  
Author(s):  
Sergei I. Badulin ◽  
Victor I. Shrira
Keyword(s):  
Shear Flow ◽  
Internal Wave ◽  
Wave Field ◽  
Large Scale ◽  
Spatial Scales ◽  
Energy Concentration ◽  
Local Analysis ◽  
Mean Flow ◽  
Wave Trapping ◽  
Wave Dynamics

The propagation of guided internal waves on non-uniform large-scale flows of arbitrary geometry is studied within the framework of linear inviscid theory in the WKB-approximation. Our study is based on a set of Hamiltonian ray equations, with the Hamiltonian being determined from the Taylor-Goldstein boundary-value problem for a stratified shear flow. Attention is focused on the fundamental fact that the generic smooth non-uniformities of the large-scale flow result in specific singularities of the Hamiltonian. Interpreting wave packets as particles with momenta equal to their wave vectors moving in a certain force field, one can consider these singularities as infinitely deep potential holes acting quite similarly to the ‘black holes’ of astrophysics. It is shown that the particles fall for infinitely long time, each into its own ‘black hole‘. In terms of a particular wave packet this falling implies infinite growth with time of the wavenumber and the amplitude, as well as wave motion focusing at a certain depth. For internal-wave-field dynamics this provides a robust mechanism of a very specific conservative and moreover Hamiltonian irreversibility.This phenomenon was previously studied for the simplest model of the flow non-uniformity, parallel shear flow (Badulin, Shrira & Tsimring 1985), where the term ‘trapping’ for it was introduced and the basic features were established. In the present paper we study the case of arbitrary flow geometry. Our main conclusion is that although the wave dynamics in the general case is incomparably more complicated, the phenomenon persists and retains its most fundamental features. Qualitatively new features appear as well, namely, the possibility of three-dimensional wave focusing and of ‘non-dispersive’ focusing. In terms of the particle analogy, the latter means that a certain group of particles fall into the same hole.These results indicate a robust tendency of the wave field towards an irreversible transformation into small spatial scales, due to the presence of large-scale flows and towards considerable wave energy concentration in narrow spatial zones.

scholarly journals Energy-Efficient Routing Control Algorithm in Large-Scale WSN for Water Environment Monitoring with Application to Three Gorges Reservoir Area

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Yuanchang Zhong ◽  
Lin Cheng ◽  
Liang Zhang ◽  
Yongduan Song ◽  
Hamid Reza Karimi
Keyword(s):  
Three Gorges Reservoir ◽  
Large Scale ◽  
Water Environment ◽  
Maximum Energy ◽  
Base Station ◽  
Three Gorges Reservoir Area ◽  
Three Gorges ◽  
Environment Monitoring ◽  
Cluster Heads ◽  
Node Energy

The typical application backgrounds of large-scale WSN (wireless sensor networks) for the water environment monitoring in the Three Gorges Reservoir are large coverage area and wide distribution. To maximally prolong lifetime of large-scale WSN, a new energy-saving routing algorithm has been proposed, using the method of maximum energy-welfare optimization clustering. Firstly, temporary clusters are formed based on two main parameters, the remaining energy of nodes and the distance between a node and the base station. Secondly, the algorithm adjusts cluster heads and optimizes the clustering according to the maximum energy-welfare of the cluster by the cluster head shifting mechanism. Finally, in order to save node energy efficiently, cluster heads transmit data to the base station in single-hop and multihop way. Theoretical analysis and simulation results show that the proposed algorithm is feasible and advanced. It can efficiently save the node energy, balance the energy dissipation of all nodes, and prolong the network lifetime.

Application areas of the angle reflector

2021 ◽  
pp. 54-59
Author(s):  
L. R. Yurenkova ◽  
O. A. Yakovuk ◽  
I. V. Morozov
Keyword(s):  
Radio Wave ◽  
Outer Space ◽  
Road Transport ◽  
Optical Systems ◽  
Design Parameters ◽  
Design Activity ◽  
Primary Role ◽  
Beam Laser ◽  
Wide Range ◽  
Graphical Calculation

The article provides examples of how the device known as the «angle reflector» a few decades ago has been increasingly used in various fields of science and technology in recent years. Angle reflectors are designed to change (reflect) optical and radar rays in the direction, opposite to the original direction. At present, angle reflectors are widely used to ensure the safety of road transport on dangerous road sections. Radio wave reflectors have the same design as optical ones; therefore, in radio detection and location, angle reflectors are used to send warning signals to ship radars on bridge supports, beacons and buoys. Modern angle reflectors attached to meteorological probes allow determining the direction and speed of the wind at high altitude, which is especially important in the study of the outer space. In recent years, devices have been developed to improve the accuracy of radar stations calibration. The examples of graphical calculation of angle reflectors presented in the article clearly demonstrate the primary role of geometry in the design activity of an engineer. The graphical calculation is based on the theoretical positions of projective geometry. The design and calculation of optical systems is carried out by the graphoanalytic method, since only with a combination of graphical and analytical methods it is possible to accurately calculate the course of a light beam, laser, or radio wave and thereby determine the design parameters of the devices. The article focuses on a graphical method for calculating two types of angle reflectors using orthogonal projection, due to which modern engineers will be able to create more up-to-date designs of optical systems with a wide range of applications.

scholarly journals Analysis of Site Selection and Design Example of Spoil Ground

2021 ◽  
Vol 631 (1) ◽  
pp. 012005
Author(s):  
Liheng Zhang ◽  
Yi He ◽  
Jie Chen
Keyword(s):  
Site Selection ◽  
Large Scale ◽  
Drainage System ◽  
Not Given ◽  
Detailed Design ◽  
Engineering Construction ◽  
Key Points ◽  
Selection Principles ◽  
Secondary Disasters ◽  
Negative Impacts

Abstract As an auxiliary project of engineering construction, spoil ground is often not given enough attention. Unreasonable spoiled materials not only have negative impacts on the local natural environment, but also generate the risk of secondary disasters. The selection and design of spoil ground is an important part of earthwork. And thus it is necessary to select the site of spoil ground reasonably and carefully and carry out detailed design of spoil, protection and flood drainage. First of all, the basic selection principles of spoil ground were discussed in this paper. Then, combined with the spoil ground design of the Heat and Power Cogeneration Power Workshop Project in Zhenfeng County's Coal, Electricity and Metallurgical Integration Industrial Park, the author presented elaboration of the technical key points of site selection, slope stability, blocking engineering and flood drainage system of large-scale spoil ground. The analysis in this paper can be used as a reference for similar spoil ground design.

scholarly journals Influence of pipeline geometry on hydrodynamics and heat transfer processes by an example of a ship steam generator

2021 ◽  
Vol 2088 (1) ◽  
pp. 012033
Author(s):  
O V Mitrofanova ◽  
A V Fedorinov
Keyword(s):  
Nuclear Power ◽  
Large Scale ◽  
Complex Geometry ◽  
Swirling Flow ◽  
Thermal Power ◽  
Design Parameters ◽  
Nuclear Power Installation ◽  
Wide Range ◽  
Nuclear Power Installations ◽  
Power Installations

Abstract The theoretical and computational analysis proposed in this work is aimed at identifying the features of thermal and hydrodynamic processes carried out in the steam-generating channels of the ship type water-moderated nuclear power installations. It is shown that the complex geometry of the thermohydraulic tract curvilinear channels of the steam generating system has a significant effect on the efficiency of the transport nuclear power installation. In addition to the formation of large-scale vortex structures and swirling flow in the pipeline, the phenomenon of the swirling flow crisis is revealed, under which the low-frequency component of the acoustic spectrum is enhanced. The scientific and applied significance of the proposed research is associated with the need to ensure a wide range of operational changes in efficient and safe operation power modes of icebreaker nuclear power installations. The research, aimed at developing the principles of physical and mathematical modeling of complex vortex flows, is necessary to optimize the design parameters of the thermal power equipment elements of new generation ship nuclear power installations in order to ensure increased safety and reliability of their operation.

Design Parameters of Brush Seals and Their Impact on Seal Performance

2012 ◽  
Author(s):  
H. Schwarz ◽  
J. Friedrichs ◽  
J. Flegler
Keyword(s):  
Steam Turbine ◽  
Gas Turbine ◽  
Large Scale ◽  
Design Parameters ◽  
Test Rig ◽  
Pressure Drops ◽  
Seal Design ◽  
Brush Seal ◽  
Extreme Load ◽  
Brush Seals

Brush seals, which were originally designed for gas turbine applications, have been successfully applied to large-scale steam turbines within the past decade. From gas turbine applications, the fundamental behavior and designing levers are known. However, the application of brush seals to a steam turbine is still a challenge. This challenge is mainly due to the extreme load on the brush seal while operating under steam. Furthermore, it is difficult to test brush seals under realistic conditions, i.e. under live steam conditions with high pressure drops. Due to these insufficiencies, 2 test rigs were developed at the University of Technology Braunschweig, Germany. The first test rig is operated under pressurized air and allows testing specific brush seal characteristics concerning their general behavior. The knowledge gained from these tests can be validated in the second test rig, which is operated under steam at pressure drops of 45 bar and temperatures up to 450 °C. Using both the air test rig and the steam test rig helps keep the testing effort comparably small. Design variants can be pre-tested with air, and promising brush seal designs can consequently be tested in the steam seal test rig. The paper focuses on a clamped brush seal design which, amongst others, is used in steam turbine blade paths and shaft seals of current Siemens turbines. The consequences of the brush assembly on the brush appearance and brush performance are shown. The clamped brush seal design reveals several particularities compared to welded brushes. It could be shown that the clamped bristle pack tends to gape when clamping forces rise. Gapping results in an axially expanding bristle pack, where the bristle density per unit area and the leakage flow vary. Furthermore, the brush elements are usually assembled with an axial lay angle, i.e. the bristles are reclined against the backing plate. Hence, the axial lay angle is also part of the investigation.

Sign in / Sign up

Export Citation Format

Share Document