A New Method of Steam Quality Measurement Based on Ultrasound

1999 ◽  
Vol 121 (3) ◽  
pp. 172-175 ◽  
Author(s):  
J. J. S. Shen

A new method of measuring the steam quality based on ultrasound is presented in this paper. This method is based on rigorous consideration of the steam’s thermodynamic properties. It is shown in the paper that the steam’s speed of sound depends on its quality at a given saturation temperature. Thus, the quality of the wet steam can be determined if its speed of sound is known. The speed of sound of a flowing fluid can be measured using transit-time ultrasonic meters. Field testing of a pair of customdesigned ultrasonic transducers has shown that it is feasible to measure the steam’s speed of sound. An uncertainty analysis of this new method is also presented in the paper. The analysis suggests that this method is capable of achieving a measurement accuracy of better than ±3 percentage points of the steam quality under typical oil field steam injection conditions.

2020 ◽  
Vol 2020 (4) ◽  
pp. 25-32
Author(s):  
Viktor Zheltov ◽  
Viktor Chembaev

The article has considered the calculation of the unified glare rating (UGR) based on the luminance spatial-angular distribution (LSAD). The method of local estimations of the Monte Carlo method is proposed as a method for modeling LSAD. On the basis of LSAD, it becomes possible to evaluate the quality of lighting by many criteria, including the generally accepted UGR. UGR allows preliminary assessment of the level of comfort for performing a visual task in a lighting system. A new method of "pixel-by-pixel" calculation of UGR based on LSAD is proposed.


2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Yakun Gao ◽  
Haibin Li ◽  
Shuhuan Wen

This paper proposed a new method of underwater images restoration and enhancement which was inspired by the dark channel prior in image dehazing field. Firstly, we proposed the bright channel prior of underwater environment. By estimating and rectifying the bright channel image, estimating the atmospheric light, and estimating and refining the transmittance image, eventually underwater images were restored. Secondly, in order to rectify the color distortion, the restoration images were equalized by using the deduced histogram equalization. The experiment results showed that the proposed method could enhance the quality of underwater images effectively.


2005 ◽  
Author(s):  
Pei Liang ◽  
Jianjun Yu ◽  
Guirong Zu ◽  
Xinjiang Li ◽  
Yang Shen ◽  
...  

2020 ◽  
Vol 40 (9) ◽  
pp. 771-781
Author(s):  
Janne van Gisbergen ◽  
Jaap den Doelder

AbstractRecycling of thermoplastic polymers is an important element of sustainable circular economy practices. The quality of mechanically recycled polymers is a concern. A method is presented to predict the structure and processability of recycled blends of polymers based on processability knowledge of their virgin precursor components. Blending rules at molecular weight distribution level are well established and form the foundation of the new method. Two essential fundamental building blocks are combined with this foundation. First, component and blend structure are related to viscosity via tube theories. Second, viscosity is related to melt flow index via a continuum mechanics approach. Emulator equations are built based on virtual experimental designs for fast forward and reverse calculations directly relating structure to viscosity and processability. The new combined method is compared with empirical blend rules, and shows important similarities and also clear quantitative differences. Finally, the new method is applied to practical recycling quality challenges.


PEDIATRICS ◽  
1999 ◽  
Vol 103 (Supplement_E1) ◽  
pp. 248-254 ◽  
Author(s):  
Anne G. Castles ◽  
Arnold Milstein ◽  
Cheryl L. Damberg

Large employers have become increasingly involved in helping to set the agenda for quality measurement and improvement. Moreover, they are beginning to hold health care organizations accountable for their performance through marketplace incentives, including the public reporting of comparative quality data and the linkage of reimbursement to performance on quality measures. The Pacific Business Group on Health (PBGH) is an employer coalition that has been prominent in establishing models for collaborative quality measurement and improvement in the California marketplace. PBGH's involvement in quality stems from an environment in which purchasers were faced with high health care costs, yet virtually no information with which to assess the value their employees received from that care. Research indicating widespread variation in performance across health care organizations and seemingly limited oversight for quality of care within the industry has further motivated purchasers' efforts to better understand the quality of care being delivered to their em-ployees. Using the purchasing power of employers representing 2.5-million covered lives, PBGH endeavors to encourage the transition of the health care marketplace from one that competes solely on price to one that competes on price and quality. This entails collaborating with the health care industry to develop and publicly report valid performance data for use by both large employers and consumers of health care services. It also includes communicating to the marketplace purchasers' commitment to making purchasing decisions based on quality as well as cost. PBGH efforts to measure, report, and improve quality have been demonstrated by several undertakings in the perinatal care arena, including research to assess cesarean section rates and newborn readmission rates across California hospitals. employer coalition, purchaser, quality measurement, quality improvement, report cards, perinatal quality of care.


2020 ◽  
Vol 26 (4) ◽  
pp. 50-55
Author(s):  
A.R. Stasyshyn ◽  
◽  
A.A. Hurayevskyy ◽  
Yu.Y. Holyk ◽  
◽  
...  

Aim. To analyze the effectiveness of a new method of antireflux surgery in patients with hiatal hernia. Materials and Methods. The results of treatment of 157 patients with hiatal hernia from 2016 to 2020 are analyzed. The patients were divided into 3 groups: group I, N=59, underwent laparoscopic antireflux operation modified by the authors (Patent of Ukraine № 59772); group II (N=77), underwent laparoscopic Nissen fundoplication; and group III (N=21) - laparoscopic Toupet fundoplication. Results and Discussion. At 36 months post-surgery follow-up, there was a statistically significant difference in favor of group I on the average scores of the visual analog scale for reflux symptoms, dysphagia and extraesophageal symptoms; the average quality of life questionnaire scores; the average DeMeester index; distribution of the patients by satisfaction; distribution of the patients by degree of reflux esophagitis according to the Los Angeles classification; and distribution by gas-bloat syndrome. Conclusions. Clinical application of the developed new method of laparoscopic surgery for hiatal hernia reduces the number of relapses and complications after surgery, and improves the quality of life of patients. Key words: hiatal hernia, antireflux surgery, new methods of treatment


2021 ◽  
Vol 21 (2) ◽  
pp. 86-90
Author(s):  
Tri Akhyari Romadhon ◽  
M. Izman Herdiansyah

Open Government is committed to improving the quality of information availability on government activities, supporting civil society participation in government, upholding professional standards in public administration to prevent corruption, abuse of power and increasing access to the use of new technologies to support accountability and openness. Currently, many governments have implemented e-government which supports the government's goals in open government. Where, e-government is used to describe the use of technology in carrying out several government tasks. The city government of Palembang has several applications or e-government systems that are open government. The city government of Palembang has not made a quality measurement of the e-government that has been implemented, so it is not known the level of quality in each application or system implemented. Based on this explanation, it is necessary to analyze the level of service quality in the system that has been implemented by the Palembang City Government.


2012 ◽  
Vol 236-237 ◽  
pp. 839-843
Author(s):  
Xiao Meng Cui ◽  
Guang Xue Chen ◽  
Huan Mei Wang ◽  
Lin Lin Chen

In this study we present a new framework to assess line micro quality of multicolor prints adapted to a low-cost image quality analysis system based on common flatbed scanner. The contribution elements including quality metrics, measurement principle, applying methods and detection instrument, which were complemented and sorted in terms of ISO 13660 standard, were described and a case experiment was conducted to survey the output performance of both inkjet printer and xerographic printer, two most popular digital printing technologies. Their qualities were compared in details rendering angle such as width and straightness of line, raggedness and blurriness in line edges, as well as darkness and contrast in color. The results verify the efficiency and shortcomings of the framework. Meanwhile, the metric values let us take an investigation in the character of each digital printing technology in micron size.


2015 ◽  
Vol 15 (7) ◽  
pp. 88-98
Author(s):  
J. Dezert ◽  
A. Tchamova ◽  
P. Konstantinova

Abstract The main purpose of this paper is to apply and to test the performance of a new method, based on belief functions, proposed by Dezert et al. in order to evaluate the quality of the individual association pairings provided in the optimal data association solution for improving the performances of multisensor-multitarget tracking systems. The advantages of its implementation in an illustrative realistic surveillance context, when some of the association decisions are unreliable and doubtful and lead to potentially critical mistake, are discussed. A comparison with the results obtained on the base of Generalized Data Association is made.


2015 ◽  
Vol 75 (5) ◽  
Author(s):  
Ang Qiu Mei ◽  
Md Azree Othuman Mydin

This study was done to investigate the relationship between indoor environmental quality and prevalence of Sick Building Syndrome in six small offices inPenangIsland. Indoor environmental quality measurement was conducted according to relevant standards. There are totally Sixty workers were selected to participate in an electronic questionnaire survey. Questionnaire was used to record the comfort level of respondents in the case studies and level of sick building syndrome faced by respondents. Through indoor environmental quality measurement, it is found that most of the offices facing the lighting and noise problem. The result from the questionnaire shows that in overall, the occupants satisfy with their working environment in term of indoor environmental quality although the result also shows the opinions of occupants on dissatisfaction on certain indoor environmental parameter according to case study. The study also found that most of the occupants feel drowsy and fatigue when they work within the offices. Besides, due to the difference of the indoor environmental quality of the buildings, the occupants are suffered from different symptoms of the sick building syndrome.


Sign in / Sign up

Export Citation Format

Share Document