Effect of Strength Matching and Strain Hardening Capacity on Fracture Performance of X80 Line Pipe Girth Welded Joint Subjected to Uniaxial Tensile Loading

2007 ◽  
Vol 129 (4) ◽  
pp. 318 ◽  
Author(s):  
Hiroyuki Motohashi ◽  
Naoto Hagiwara
Keyword(s):  
Strain Hardening ◽  
Welded Joint ◽  
Tensile Loading ◽  
Uniaxial Tensile ◽  
Line Pipe ◽  
Fracture Performance ◽  
Uniaxial Tensile Loading

scholarly journals Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1375 ◽  
Author(s):  
Hiroki Ogura ◽  
Venkatesh Nerella ◽  
Viktor Mechtcherine
Keyword(s):  
3D Printing ◽  
Strain Hardening ◽  
New Technology ◽  
Tensile Loading ◽  
The Other ◽  
Uniaxial Tensile ◽  
3D Printer ◽  
Fiber Volume ◽  
Structural Applications ◽  
Uniaxial Tensile Loading

Incorporating reinforcement into the practice of digital concrete construction, often called 3D-concrete-printing, is a prerequisite for wide-ranging, structural applications of this new technology. Strain-Hardening Cement-based Composites (SHCC) offer one possible solution to this challenge. In this work, printable SHCC were developed and tested. The composites could be extruded through a nozzle of a 3D-printer so that continuous filaments could be deposited, one upon the other, to build lab-scaled wall specimens without noticeable deformation of the bottom layers. The specimens extracted from the printed walls exhibited multiple fine cracks and pronounced strain-hardening characteristics under uniaxial tensile loading, even for fiber volume fractions as low as 1.0%. In fact, the strain-hardening characteristics of printed specimens were superior to those of mold-cast SHCC specimens.

Failure Analysis of Laminates Single-Lap Adhesive Joints under Uniaxial Tensile Loading

2012 ◽  
Vol 490-495 ◽  
pp. 2201-2204
Author(s):  
Yin Huan Yang
Keyword(s):  
Shear Stress ◽  
Tensile Loading ◽  
Adhesive Joints ◽  
Experimental Results ◽  
Uniaxial Tensile ◽  
Tension Tests ◽  
Different Types ◽  
Uniaxial Tensile Loading ◽  
Overlap Area ◽  
Main Factor

Tension tests on three different types of T700/EXOPY unidirectional laminates single-lap adhesive joints under uniaxial tensile loading were performed and effect of adherend thickness and spew fillets on strength of single-lap adhesive joints were analyzed in this paper. According to the experimental results, it is found that joint strength was not linear with the adherend thickness and much affected by spew fillets in overlap ends. At the same time, finite element simulations are carried out to analyze the peel/shear stress fields along joint interfaces and the intermediate layer of adhesive. The simulation results show that it is the main factor to leading to joint failure that the maximum peel/shear stress is occurred at overlap area edges and peel/shear stress of joints with spew fillet at the overlap area edges is less than that of joints with no spew fillet. Good agreements between the present simulations and the experimental results are found.

Sign in / Sign up

Export Citation Format

Share Document