Airflow-Housing-Induced Resonances of Rotating Optical Disks

2007 ◽  
Vol 74 (6) ◽  
pp. 1252-1263 ◽  
Author(s):  
R. M. C. Mestrom ◽  
R. H. B. Fey ◽  
H. Nijmeijer ◽  
P. M. R. Wortelboer ◽  
W. Aerts
Keyword(s):  
Numerical Model ◽  
Pressure Distribution ◽  
Critical Speed ◽  
Experimental Approach ◽  
Experimental Results ◽  
Lubrication Equation ◽  
Global View ◽  
Optical Disks ◽  
Insight Into ◽  
Finite Difference Techniques

Numerous excitation sources for disk vibrations are present in optical drives. For increasing rotation speeds, airflow-housing-induced vibrations have become more and more important. Currently, drives are designed in which rotation speeds are so high that critical speed resonances may show up. The presence of these resonances depends on the layout of the inner housing geometry of the drive. The influence of the drive inner housing geometry is investigated systematically by means of a numerical-experimental approach. An analytical model is derived, containing disk dynamics and the geometry-induced pressure distribution acting as the excitation mechanism on the disk. The Reynolds’ lubrication equation is used as a first approach for the modeling of the pressure distribution. The model is numerically implemented using an approach based on a combination of finite element and finite difference techniques. An idealized, drive-like environment serves as the experimental setup. This setup resembles the situation in the numerical model, in order to be able to verify the numerical model. Wedge-like airflow disturbances are used in order to obtain insight into the influence of drive inner geometry on the critical speed resonances of optical disks. A disk tilt measurement method is designed that yields a global view of the disk deformation. By means of two newly proposed types of plots, numerical and experimental results can be compared in a straightforward way. A qualitative match between the numerical and experimental results is obtained. The numerical and experimental methods presented provide insight into airflow-housing-induced vibrations in optical drives. Additionally, reduction of some critical speed resonances is found to be possible for certain drive inner geometry configurations.

Detailed Numerical and Experimental Investigation of Non-Isothermal Sintering of Amorphous Polymer Material

2002 ◽  
Vol 124 (3) ◽  
pp. 553-563 ◽  
Author(s):  
R. M. Tarafdar ◽  
T. L. Bergman
Keyword(s):  
Experimental Investigation ◽  
Numerical Model ◽  
Penetration Depth ◽  
Polymer Material ◽  
Amorphous Polymer ◽  
Experimental Results ◽  
Additional Insight ◽  
Morphological Response ◽  
Thermal Penetration Depth ◽  
Insight Into

Simulations and experiments are performed to investigate the coupled thermal and morphological response of polymer material during non-isothermal sintering. The experimental results are utilized to validate a numerical model that describes the response of the system. Predictions of the material expansion, its subsequent contraction due to sintering, and the temperature evolution are obtained and favorably compared with experimental results. Parametric simulations are performed to acquire additional insight into the dynamics of non-isothermal sintering while a relationship is established to describe the ratio of the sintering penetration depth to the thermal penetration depth and its dependence upon the boundary and initial temperatures.

scholarly journals Numerical and Experimental Investigation of the Effect of Cavitation on Dual Clearance Squeeze Film Damper

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Zhaojun Feng ◽  
Guihuo Luo ◽  
Hai Yang ◽  
Wangqun Deng ◽  
Wei Chen ◽  
...  
Keyword(s):  
Numerical Model ◽  
Pressure Distribution ◽  
Negative Pressure ◽  
Experimental Results ◽  
Squeeze Film ◽  
Positive Pressure ◽  
Kinetic Properties ◽  
Squeeze Film Damper ◽  
Cavitation Effect ◽  
Pressure Zone

A new dynamic model is developed for the dual clearance squeeze film damper (DCSFD) considering the effect of cavitation in this paper. The relationship between the eccentricities of the inner and outer films is achieved based on the equations of motion. The Reynolds equation and Rayleigh–Plesset equation are employed to describe the kinetic properties of DCSFD and the cavitation effect of film, respectively. Under the assumption of compressible fluid, the pressure distribution of DCSFD is finally obtained by the numerically iterative method. The film pressure distribution in the outer layer (including the positive and negative pressure zones) obtained from the experimental test agrees well with the numerical prediction, which verifies the validity of the proposed numerical model. In Section 5, the effects of oil temperature, inlet pressure, eccentricity, and whirling frequency on the cavitation in the film are investigated systematically and experimentally. The experimental results indicate that cavitation mainly affect the pressure in the negative pressure zone of the inner and outer film of DCSFD, but has little influence on the pressure in the positive pressure zone. The area of cavitation increased with eccentricity; when the inner eccentricity reached 0.1 or above, the area near the injection hole of film also generated a small zone of negative pressure. The numerical model and the experimental results in this paper are valuable for further research and engineering applications of DCSFD.

scholarly journals Thermochemical Heat Storage in a Lab-Scale Indirectly Operated CaO/Ca(OH)2 Reactor—Numerical Modeling and Model Validation through Inverse Parameter Estimation

2021 ◽  
Vol 11 (2) ◽  
pp. 682
Author(s):  
Gabriele Seitz ◽  
Farid Mohammadi ◽  
Holger Class
Keyword(s):  
Numerical Model ◽  
Gas Flow ◽  
Reaction Rate ◽  
Heat Storage ◽  
Bulk Material ◽  
Fixed Bed ◽  
Experimental Results ◽  
Fixed Bed Reactor ◽  
Thermochemical Heat Storage ◽  
Speed Up

Calcium oxide/Calcium hydroxide can be utilized as a reaction system for thermochemical heat storage. It features a high storage capacity, is cheap, and does not involve major environmental concerns. Operationally, different fixed-bed reactor concepts can be distinguished; direct reactor are characterized by gas flow through the reactive bulk material, while in indirect reactors, the heat-carrying gas flow is separated from the bulk material. This study puts a focus on the indirectly operated fixed-bed reactor setup. The fluxes of the reaction fluid and the heat-carrying flow are decoupled in order to overcome limitations due to heat conduction in the reactive bulk material. The fixed bed represents a porous medium where Darcy-type flow conditions can be assumed. Here, a numerical model for such a reactor concept is presented, which has been implemented in the software DuMux. An attempt to calibrate and validate it with experimental results from the literature is discussed in detail. This allows for the identification of a deficient insulation of the experimental setup. Accordingly, heat-loss mechanisms are included in the model. However, it can be shown that heat losses alone are not sufficient to explain the experimental results. It is evident that another effect plays a role here. Using Bayesian inference, this effect is identified as the reaction rate decreasing with progressing conversion of reactive material. The calibrated model reveals that more heat is lost over the reactor surface than transported in the heat transfer channel, which causes a considerable speed-up of the discharge reaction. An observed deceleration of the reaction rate at progressed conversion is attributed to the presence of agglomerates of the bulk material in the fixed bed. This retardation is represented phenomenologically by mofifying the reaction kinetics. After the calibration, the model is validated with a second set of experimental results. To speed up the calculations for the calibration, the numerical model is replaced by a surrogate model based on Polynomial Chaos Expansion and Principal Component Analysis.

scholarly journals Experimental study of the $ \gamma p \rightarrow K^{0}\Sigma^{+}$, $ \gamma n \rightarrow K^{0} \Lambda$, and $ \gamma n \rightarrow K^{0} \Sigma^{0}$ reactions at the Mainz Microtron

2019 ◽  
Vol 55 (11) ◽  
Author(s):  
C. S. Akondi ◽  
K. Bantawa ◽  
D. M. Manley ◽  
S. Abt ◽  
P. Achenbach ◽  
...  
Keyword(s):  
Experimental Study ◽  
Cross Sections ◽  
Differential Cross ◽  
Legendre Polynomials ◽  
Neutral Kaon ◽  
Experimental Results ◽  
Differential Cross Sections ◽  
Theoretical Predictions ◽  
Photoproduction Reactions ◽  
Insight Into

Abstract.This work measured $ \mathrm{d}\sigma/\mathrm{d}\Omega$dσ/dΩ for neutral kaon photoproduction reactions from threshold up to a c.m. energy of 1855MeV, focussing specifically on the $ \gamma p\rightarrow K^0\Sigma^+$γp→K0Σ+, $ \gamma n\rightarrow K^0\Lambda$γn→K0Λ, and $ \gamma n\rightarrow K^0 \Sigma^0$γn→K0Σ0 reactions. Our results for $ \gamma n\rightarrow K^0 \Sigma^0$γn→K0Σ0 are the first-ever measurements for that reaction. These data will provide insight into the properties of $ N^{\ast}$N* resonances and, in particular, will lead to an improved knowledge about those states that couple only weakly to the $ \pi N$πN channel. Integrated cross sections were extracted by fitting the differential cross sections for each reaction as a series of Legendre polynomials and our results are compared with prior experimental results and theoretical predictions.

Experimental Study of a Tanker Ship Squat in Shallow Water

2014 ◽  
Vol 66 (2) ◽  
Author(s):  
Mohammadreza Fathi Kazerooni ◽  
Mohammad Saeed Seif
Keyword(s):  
Experimental Study ◽  
Shallow Water ◽  
Experimental Approach ◽  
Model Tests ◽  
Ship Hull ◽  
Experimental Results ◽  
Shallow Waters ◽  
Towing Tank ◽  
Ship Model

One of the phenomena restricting the tanker navigation in shallow waters is reduction of under keel clearance in the terms of sinkage and dynamic trim that is called squatting. According to the complexity of flow around ship hull, one of the best methods to predict the ship squat is experimental approach based on model tests in the towing tank. In this study model tests for tanker ship model had been held in the towing tank and squat of the model are measured and analyzed. Based on experimental results suitable formulae for prediction of these types of ship squat in fairways are obtained.

Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results

2013 ◽  
Vol 554-557 ◽  
pp. 1375-1381 ◽  
Author(s):  
Laurence Giraud-Moreau ◽  
Abel Cherouat ◽  
Jie Zhang ◽  
Houman Borouchaki
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Sheet Metal ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Computation Time ◽  
Experimental Results ◽  
Forming Process ◽  
Adaptive Remeshing

Recently, new sheet metal forming technique, incremental forming has been introduced. It is based on using a single spherical tool, which is moved along CNC controlled tool path. During the incremental forming process, the sheet blank is fixed in sheet holder. The tool follows a certain tool path and progressively deforms the sheet. Nowadays, numerical simulations of metal forming are widely used by industry to predict the geometry of the part, stresses and strain during the forming process. Because incremental forming is a dieless process, it is perfectly suited for prototyping and small volume production [1, 2]. On the other hand, this process is very slow and therefore it can only be used when a slow series production is required. As the sheet incremental forming process is an emerging process which has a high industrial interest, scientific efforts are required in order to optimize the process and to increase the knowledge of this process through experimental studies and the development of accurate simulation models. In this paper, a comparison between numerical simulation and experimental results is realized in order to assess the suitability of the numerical model. The experimental investigation is realized using a three-axis CNC milling machine. The forming tool consists in a cylindrical rotating punch with a hemispherical head. A subroutine has been developed to describe the tool path from CAM procedure. A numerical model has been developed to simulate the sheet incremental forming process. The finite element code Abaqus explicit has been used. The simulation of the incremental forming process stays a complex task and the computation time is often prohibitive for many reasons. During this simulation, the blank is deformed by a sequence of small increments that requires many numerical increments to be performed. Moreover, the size of the tool diameter is generally very small compared to the size of the metal sheet and thus the contact zone between the tool and the sheet is limited. As the tool deforms almost every part of the sheet, small elements are required everywhere in the sheet resulting in a very high computation time. In this paper, an adaptive remeshing method has been used to simulate the incremental forming process. This strategy, based on adaptive refinement and coarsening procedures avoids having an initially fine mesh, resulting in an enormous computing time. Experiments have been carried out using aluminum alloy sheets. The final geometrical shape and the thickness profile have been measured and compared with the numerical results. These measurements have allowed validating the proposed numerical model. References [1] M. Yamashita, M. Grotoh, S.-Y. Atsumi, Numerical simulation of incremental forming of sheet metal, J. Processing Technology, No. 199 (2008), p. 163 172. [2] C. Henrard, A.M. Hbraken, A. Szekeres, J.R. Duflou, S. He, P. Van Houtte, Comparison of FEM Simulations for the Incremental Forming Process, Advanced Materials Research, 6-8 (2005), p. 533-542.

scholarly journals Numerical Simulation and Hydrodynamic Performance Predicting of 2 Two-Dimensional Hydrofoils in Tandem Configuration

2021 ◽  
Vol 9 (5) ◽  
pp. 462
Author(s):  
Yuchen Shang ◽  
Juan J. Horrillo
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Resource Constraints ◽  
Lift Coefficient ◽  
Parametric Method ◽  
Experimental Results ◽  
Hydrodynamic Performance ◽  
Tandem Configuration ◽  
Artificial Neural Network Ann ◽  
Naca 0012

In this study we investigated the performance of NACA 0012 hydrofoils aligned in tandem using parametric method and Neural Networks. We use the 2D viscous numerical model (STAR-CCM+) to simulate the hydrofoil system. To validate the numerical model, we modeled a single NACA 0012 configuration and compared it to experimental results. Results are found in concordance with the published experimental results. Then two NACA 0012 hydrofoils in tandem configuration were studied in relation to 788 combinations of the following parameters: spacing between two hydrofoils, angle of attack (AOA) of upstream hydrofoil and AOA of downstream hydrofoil. The effects exerted by these three parameters on the hydrodynamic coefficients Lift coefficient (CL), Drag Coefficient (CD) and Lift-Drag Ratio (LDR), are consistent with the behavior of the system. To establish a control system for the hydrofoil craft, a timely analysis of the hydrodynamic system is needed due to the computational resource constraints, analysis of a large combination and time consuming of the three parameters established. To provide a broader and faster way to predict the hydrodynamic performance of two hydrofoils in tandem configuration, an optimal artificial neural network (ANN) was trained using the large combination of three parameters generated from the numerical simulations. Regression analysis of the output of ANN was performed, and the results are consistent with numerical simulation with a correlation coefficient greater than 99.99%. The optimized spacing of 6.6c are suggested where the system has the lowest CD while obtaining the highest CL and LDR. The formula of the ANN was then presented, providing a reliable predicting method of hydrofoils in tandem configuration.

Numerical modeling of high velocity impact in sandwich panels with honeycomb core and composite skin including composite progressive damage model

2018 ◽  
Vol 22 (8) ◽  
pp. 2768-2795 ◽  
Author(s):  
Meysam Khodaei ◽  
Mojtaba Haghighi-Yazdi ◽  
Majid Safarabadi
Keyword(s):  
Numerical Model ◽  
Sandwich Panel ◽  
Material Model ◽  
Absorption Capacity ◽  
Numerical Results ◽  
Ballistic Impact ◽  
Experimental Results ◽  
Ballistic Limit ◽  
Honeycomb Core ◽  
Damage Initiation

In this paper, a numerical model is developed to simulate the ballistic impact of a projectile on a sandwich panel with honeycomb core and composite skin. To this end, a suitable material model for the aluminum honeycomb core is used taking the strain-rate dependent properties into account. To validate the ballistic impact of the projectile on the honeycomb core, numerical results are compared with the experimental results available in literature and ballistic limit velocities are predicted with good accuracy. Moreover, to achieve composite skin material model, a VUMAT subroutine including damage initiation based on Hashin’s seven failure criteria and damage evolution based on MLT approach modulus degradation is used. To validate the composite material model VUMAT subroutine, the ballistic limit velocities of the projectile impact on the composite laminates are predicted similar to the numerical results presented by other researchers. Next, the numerical model of the sandwich panel ballistic impact at different velocities is compared with the available experimental results in literature, and energy absorption capacity of the sandwich panel is predicted accurately. In addition, the numerical model simulated the sandwich panel damage mechanisms in different stages similar to empirical observations. Also, the composite skin damages are investigated based on different criteria damage contours.

Growth Mechanism vs Matter Transport in Thermally Growing Oxides on High Temperature Materials: A Brief Survey Based on the Case Study of Alumina Formers

2009 ◽  
Vol 289-292 ◽  
pp. 385-395 ◽  
Author(s):  
Jerzy Jedlinski
Keyword(s):  
Growth Mechanism ◽  
Experimental Approach ◽  
Experimental Results ◽  
Metallic Materials ◽  
High Temperature Materials ◽  
Matter Transport ◽  
Alumina Formers ◽  
Microstructure Morphology ◽  
The Relationship

This paper reviews briefly the relationship between the growth mechanism and matter transport using as an example the best currently applied metallic materials being alumina formers. The attention is paid to the experimental approach as well as to the interpretation procedure of experimental results. The scale structure, microstructure, morphology and phase composition are indicated as factors strongly affecting its growth mechanism. The attempt is made to elucidate the possible relationships between the obtained experimental results and actual scale growth mechanisms operating during oxidation exposures.

scholarly journals PREDICTION OF WAVE FORCE ACTING ON HORIZONTAL PLATE

2012 ◽  
Vol 1 (33) ◽  
pp. 52 ◽  
Author(s):  
Susumu Araki ◽  
Ichiro Deguchi
Keyword(s):  
Numerical Model ◽  
Wave Force ◽  
Experimental Results ◽  
Prediction Methods ◽  
Horizontal Plate

The applicability of the existing prediction methods of the wave force acting on a horizontal plate above the still water level is investigated by comparing the estimated wave force with the measured wave force. The applicability of a numerical model as well as the equations from experimental results is investigated. Some prediction methods overestimate the measured wave force, and some prediction methods underestimate the measured wave force.

Sign in / Sign up

Export Citation Format

Share Document