Analytical Modeling of Chatter Stability in Turning and Boring Operations—Part I: Model Development

2007 ◽  
Vol 129 (4) ◽  
pp. 726-732 ◽  
Author(s):  
Emre Ozlu ◽  
Erhan Budak
Keyword(s):  
Model Development ◽  
Three Dimensional ◽  
Chip Thickness ◽  
Stability Limit ◽  
Chatter Stability ◽  
Nose Radius ◽  
Process Dynamics ◽  
Model Predictions ◽  
Accurate Treatment ◽  
Acceptable Agreement

In this paper an analytical model for stability limit predictions in turning and boring operations is proposed. The multidimensional model includes the three-dimensional geometry of the processes resulting in an eigenvalue problem. In addition, a model for the chip thickness at the insert nose is proposed to observe the effect of the insert nose radius on the chatter stability limit. The model represents a development over existing ones due to accurate treatment of the multidimensional process dynamics and geometry, and resulting practical formulas for stability limit predictions. Chatter experiments are conducted for both turning and boring in order to verify the model predictions, and overall, an acceptable agreement is observed.

Analytical Modeling of Chatter Stability in Turning and Boring Operations—Part II: Experimental Verification

2007 ◽  
Vol 129 (4) ◽  
pp. 733-739 ◽  
Author(s):  
Emre Ozlu ◽  
Erhan Budak
Keyword(s):  
Satisfactory Agreement ◽  
Experimental Verification ◽  
Analytical Modeling ◽  
Stability Limit ◽  
Experimental Results ◽  
Chatter Stability ◽  
Nose Radius ◽  
The Stability ◽  
Flexible Component ◽  
Cutting System

In this part of the paper series, chatter experiments are conducted in order to verify the proposed stability models presented in the first part (Ozlu, E., and Budak, E., 2007, ASME J. Manuf. Sci. Eng., 129(4), pp. 726–732). Turning and boring chatter experiments are conducted for the cases where the tool or the workpiece is the most flexible component of the cutting system. In addition, chatter experiments demonstrating the effect of the insert nose radius on the stability limit are presented. Satisfactory agreement is observed between the analytical predictions and the experimental results.

Modeling and Assessment of the Produced Water Discharges from Offshore Petroleum Platforms

2007 ◽  
Vol 42 (4) ◽  
pp. 303-310 ◽  
Author(s):  
Zhi Chen ◽  
Lin Zhao ◽  
Kenneth Lee ◽  
Charles Hannath
Keyword(s):  
Random Walk ◽  
Produced Water ◽  
Model Development ◽  
Three Dimensional ◽  
Monitoring Program ◽  
Ecological Monitoring ◽  
Numerical Approach ◽  
Ocean Model ◽  
Scale Model ◽  
Water Stream

Abstract There has been a growing interest in assessing the risks to the marine environment from produced water discharges. This study describes the development of a numerical approach, POM-RW, based on an integration of the Princeton Ocean Model (POM) and a Random Walk (RW) simulation of pollutant transport. Specifically, the POM is employed to simulate local ocean currents. It provides three-dimensional hydrodynamic input to a Random Walk model focused on the dispersion of toxic components within the produced water stream on a regional spatial scale. Model development and field validation of the predicted current field and pollutant concentrations were conducted in conjunction with a water quality and ecological monitoring program for an offshore facility located on the Grand Banks of Canada. Results indicate that the POM-RW approach is useful to address environmental risks associated with the produced water discharges.

scholarly journals The Hydromechanical Interplay in the Simplified Three-Dimensional Limit Equilibrium Analyses of Unsaturated Slope Stability

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 73
Author(s):  
Panagiotis Sitarenios ◽  
Francesca Casini
Keyword(s):  
Analytical Solution ◽  
Slope Stability ◽  
Slope Failure ◽  
Failure Modes ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Three Dimensional ◽  
Stability Limit ◽  
Smooth Transition

This paper presents a three-dimensional slope stability limit equilibrium solution for translational planar failure modes. The proposed solution uses Bishop’s average skeleton stress combined with the Mohr–Coulomb failure criterion to describe soil strength evolution under unsaturated conditions while its formulation ensures a natural and smooth transition from the unsaturated to the saturated regime and vice versa. The proposed analytical solution is evaluated by comparing its predictions with the results of the Ruedlingen slope failure experiment. The comparison suggests that, despite its relative simplicity, the analytical solution can capture the experimentally observed behaviour well and highlights the importance of considering lateral resistance together with a realistic interplay between mechanical parameters (cohesion) and hydraulic (pore water pressure) conditions.

scholarly journals The ICON Single-Column Mode

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 906
Author(s):  
Ivan Bašták Ďurán ◽  
Martin Köhler ◽  
Astrid Eichhorn-Müller ◽  
Vera Maurer ◽  
Juerg Schmidli ◽  
...  
Keyword(s):  
Data Storage ◽  
Model Development ◽  
Computational Cost ◽  
Three Dimensional ◽  
Shallow Convection ◽  
Modeling Framework ◽  
Additional Tool ◽  
Eddy Simulation ◽  
Single Column ◽  
Stratocumulus Clouds

The single-column mode (SCM) of the ICON (ICOsahedral Nonhydrostatic) modeling framework is presented. The primary purpose of the ICON SCM is to use it as a tool for research, model evaluation and development. Thanks to the simplified geometry of the ICON SCM, various aspects of the ICON model, in particular the model physics, can be studied in a well-controlled environment. Additionally, the ICON SCM has a reduced computational cost and a low data storage demand. The ICON SCM can be utilized for idealized cases—several well-established cases are already included—or for semi-realistic cases based on analyses or model forecasts. As the case setup is defined by a single NetCDF file, new cases can be prepared easily by the modification of this file. We demonstrate the usage of the ICON SCM for different idealized cases such as shallow convection, stratocumulus clouds, and radiative transfer. Additionally, the ICON SCM is tested for a semi-realistic case together with an equivalent three-dimensional setup and the large eddy simulation mode of ICON. Such consistent comparisons across the hierarchy of ICON configurations are very helpful for model development. The ICON SCM will be implemented into the operational ICON model and will serve as an additional tool for advancing the development of the ICON model.

Effects of Insert Nose Radius and Processing Cutting Parameter on the Surface Roughness of Aisi 316 Stainless Steel

2010 ◽  
Vol 447-448 ◽  
pp. 51-54
Author(s):  
Mohd Fazuri Abdullah ◽  
Muhammad Ilman Hakimi Chua Abdullah ◽  
Abu Bakar Sulong ◽  
Jaharah A. Ghani
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Finish ◽  
Feed Rate ◽  
Cutting Speed ◽  
Chip Thickness ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Nose Radius ◽  
Aisi 316

The effects of different cutting parameters, insert nose radius, cutting speed and feed rates on the surface quality of the stainless steel to be use in medical application. Stainless steel AISI 316 had been machined with three different nose radiuses (0.4 mm 0.8 mm, and 1.2mm), three different cutting speeds (100, 130, 170 m/min) and feed rates (0.1, 0.125, 0.16 mm/rev) while depth of cut keep constant at (0.4 mm). It is seen that the insert nose radius, feed rates, and cutting speed have different effect on the surface roughness. The minimum average surface roughness (0.225µm) has been measured using the nose radius insert (1.2 mm) at lowest feed rate (0.1 mm/rev). The highest surface roughness (1.838µm) has been measured with nose radius insert (0.4 mm) at highest feed rate (0.16 mm/rev). The analysis of ANOVA showed the cutting speed is not dominant in processing for the fine surface finish compared with feed rate and nose radius. Conclusion, surface roughness is decreasing with decreasing of the feed rate. High nose radius produce better surface finish than small nose radius because of the maximum uncut chip thickness decreases with increase of nose radius.

3D Numerical Simulation of Polydisperse Pressurized Gas-Solid Fluidized Bed

2011 ◽  
Author(s):  
P. Fede ◽  
O. Simonin ◽  
I. Ghouila
Keyword(s):  
Numerical Simulation ◽  
Fluidized Bed ◽  
Ethylene Polymerization ◽  
Solid Phase ◽  
Three Dimensional ◽  
Gas Velocity ◽  
Particle Segregation ◽  
3D Numerical Simulation ◽  
Model Predictions ◽  
The Mean

Three dimensional unsteady numerical simulations of dense pressurized polydisperse fluidized bed have been carried out. The geometry is a medium-scale industrial pilot for ethylene polymerization. The numerical simulation have been performed with a polydisperse collision model. The consistency of the polydisperse model predictions with the monodisperse ones is shown. The results show that the pressure distribution and the mean vertical gas velocity are not modified by polydispersion of the solid phase. In contrast, the solid particle species are not identically distributed in the fluidized bed indicating the presence of particle segregation.

Sign in / Sign up

Export Citation Format

Share Document