Study of Multimode Combustion System With Gasoline Direct Injection

2006 ◽  
Vol 129 (4) ◽  
pp. 1079-1087 ◽  
Author(s):  
Zhi Wang ◽  
Jian-Xin Wang ◽  
Shi-Jin Shuai ◽  
Yan-Jun Wang ◽  
Guo-Hong Tian ◽  
...  
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Spark Ignition ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Combustion System ◽  
Stratified Charge ◽  
Part Load ◽  
Valve Overlap ◽  
Homogeneous Charge

In this paper, a multimode combustion system was developed in a gasoline direct injection engine. A two-stage fuel-injection strategy, including flexible injection timings and flexible fuel quantity, is adopted as a main means to form desired mixture in the cylinder. The combustion system can realize five combustion modes. The homogeneous charge spark ignition (HCSI) mode was used at high load to achieve high-power output density; stratified charge spark ignition (SCSI) was adopted at intermediate load to get optimum fuel economy; stratified charge compression ignition (SCCI) was introduced at transient operation between SI and CI mode. Homogeneous charge compression ignition (HCCI) was utilized at part load to obtain ultralow emissions. Reformed charge compression ignition (RCCI) was imposed at low load to extend the HCCI operation range. In SI mode, the stratified concentration is formed by introducing a second fuel injection in the compression stroke. This kind of stratified mixture has a faster heat release than the homogeneous mixture and is primarily optimized to reduce the fuel consumption. In CI mode, the cam phase configurations are switched from positive valve overlap to negative valve overlap (NVO). The test results reveal that the CI combustion is featured with a high gradient pressure after ignition and has advantages in high thermal efficiency and low NOx emissions over SI combustion at part load.

Control of a spark ignition homogeneous charge compression ignition mode transition on a gasoline direct injection engine

2007 ◽  
Vol 221 (7) ◽  
pp. 867-875 ◽  
Author(s):  
G Tian ◽  
Z Wang ◽  
Q Ge ◽  
J Wang ◽  
S Shuai
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Direct Injection ◽  
Spark Ignition ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Combustion Mode ◽  
Key Issues ◽  
Cam Profile ◽  
Negative Valve Overlap ◽  
Homogeneous Charge

The hybrid combustion mode is an ideal operation strategy for a gasoline homogeneous charge compression ignition (HCCI) engine. A stable and smooth spark ignition (SI)/HCCI switch has been an issue in the research on multimode combustion. In this paper, the switch process has two key issues; the cam profile and throttle opening. With the developed two-stage cam system, the valve phase strategy can be switched within one engine cycle, from the normal cam profile for the SI mode to a negative valve overlap (NVO) profile for the HCCI mode, or vice versa. For a smoother and more stable switch, the throttle change was separated from the cam profile switch, which was called the stepped switch. The effect of throttle opening on HCCI combustion was studied, and the results showed that the concept of the stepped switch was reliable. With gasoline direct injection (GDI) the combustion mode switches from both SI and HCCI sides were smooth, rapid, and robust, without any abnormal combustion such as knocking and misfiring.

Experimental and Numerical Analysis on the Influences of Direct Fuel Injection into Oxygen-Depleted Environment of a Homogeneous Charge Compression Ignition Engine

2021 ◽  
pp. 1-29
Author(s):  
Ratnak Sok ◽  
Kei Yoshimura ◽  
Kenjiro Nakama ◽  
Jin Kusaka
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Fuel Injection ◽  
Double Pulse ◽  
Gasoline Direct Injection ◽  
Oh Radicals ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Intake Stroke ◽  
Direct Fuel Injection ◽  
Homogeneous Charge

Abstract The oxygen-depleted environment in the recompression stroke can convert gasoline fuel into light hydrocarbons due to thermal cracking, partial oxidation, and water-gas shift reactions. These reformate species can influence the combustion characteristics of gasoline direct injection homogeneous charge compression ignition (GDI-HCCI) engines. In this work, the combustion phenomena are investigated using a single-cylinder research engine under a medium load. The main combustion phases are experimentally advanced by direct fuel injection into the negative valve overlap (NVO) compared with that of intake stroke under single/double pulse injections. NVO peak in-cylinder pressures are lower than that of motoring due to the limited O2 concentration, emphasizing that endothermic reactions occur during the overlap. This phenomenon limits the oxidation reactions, and the thermal effect is not pronounced. The 0-D chemical kinetics results present the same increasing tendencies of classical reformed species of rich-mixture such as C3H6, C2H4, CH4, CO, and H2 as functions of injection timings. Predicted ignition delays are shortened due to the additions of these reformed species. The influences of the reformates on the main combustion are confirmed by 3-D CFD calculations, and the results show that OH radicals are advanced under NVO injections relative to intake stroke injections. Consequently, earlier heat release and cylinder pressure are noticeable. Parametric studies on the effects of injection pressure, double-pulse injection, and equivalence ratio on the combustion and emissions are also discussed experimentally.

scholarly journals Comparisons of Laboratory and On-Road Type-Approval Cycles with Idling Emissions. Implications for Periodical Technical Inspection (PTI) Sensors

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5790 ◽  
Author(s):  
Barouch Giechaskiel ◽  
Tero Lähde ◽  
Ricardo Suarez-Bertoa ◽  
Victor Valverde ◽  
Michael Clairotte
Keyword(s):  
Direct Injection ◽  
Spark Ignition ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Particulate Filters ◽  
Technical Inspection ◽  
Diesel Vehicles ◽  
Type Approval ◽  
Road Type ◽  
Technical Specifications

For the type approval of compression ignition (diesel) and gasoline direct injection vehicles, a particle number (PN) limit of 6 × 1011 p/km is applicable. Diesel vehicles in circulation need to pass a periodical technical inspection (PTI) test, typically every two years, after the first four years of circulation. However, often the applicable smoke tests or on-board diagnostic (OBD) fault checks cannot identify malfunctions of the diesel particulate filters (DPFs). There are also serious concerns that a few high emitters are responsible for the majority of the emissions. For these reasons, a new PTI procedure at idle run with PN systems is under investigation. The correlations between type approval cycles and idle emissions are limited, especially for positive (spark) ignition vehicles. In this study the type approval PN emissions of 32 compression ignition and 56 spark ignition vehicles were compared to their idle PN concentrations from laboratory and on-road tests. The results confirmed that the idle test is applicable for diesel vehicles. The scatter for the spark ignition vehicles was much larger. Nevertheless, the proposed limit for diesel vehicles was also shown to be applicable for these vehicles. The technical specifications of the PTI sensors based on these findings were also discussed.

Part-Load Operation of Gasoline Direct-Injection Compression Ignition (GDCI) Engine

2013 ◽  
Author(s):  
Mark C. Sellnau ◽  
James Sinnamon ◽  
Kevin Hoyer ◽  
Junghwan Kim ◽  
Marilou Cavotta ◽  
...  
Keyword(s):  
Direct Injection ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Part Load

scholarly journals Cycle-by-cycle variations in autonomous and spark assisted homogeneous charge compression ignition combustion of stoichiometric air–fuel mixture

2018 ◽  
Vol 10 (3) ◽  
pp. 231-243 ◽  
Author(s):  
Jacek Hunicz
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Fuel Injection ◽  
Fuel Mixture ◽  
Compression Ignition ◽  
Indicated Mean Effective Pressure ◽  
Start Of Injection ◽  
Negative Valve Overlap ◽  
Compression Ignition Combustion ◽  
Valve Overlap ◽  
Homogeneous Charge

This study investigates cycle-by-cycle variations in a gasoline fuelled, homogeneous charge compression ignition (HCCI) engine with internal exhaust gas recirculation. In order to study the effects of exhaust-fuel reactions occurring prior to the main combustion event fuel was injected directly into the cylinder at two selected timings during the negative valve overlap period. The engine was operated as both autonomous HCCI and spark assisted HCCI (SA-HCCI). The primary interest in this work was the operating region where the engine is switched between HCCI and spark ignition modes, thus operation with stoichiometric air–fuel mixture, which is typical for this region, was considered. Cycle-by-cycle variations in both combustion timing and indicated mean effective pressure (IMEP) were investigated. It was found that long-period oscillations of the IMEP occur when fuel injection is started at early stages of the negative valve overlap period, and that these can be suppressed by delaying the start of injection. This behaviour remained even when fuel injection was split into early and late-negative valve overlap injections. Spark assisted operation allowed eliminating late combustion cycles, thus improving thermal efficiency. However, characteristic patterns of IMEP variations were found to be the same for both HCCI and SA-HCCI operations, irrespective of the adopted negative valve overlap fuel injection strategy, as evidenced by using symbol-sequence statistics.

scholarly journals HCCI combustion control using advanced gasoline direct injection techniques

2018 ◽  
Vol 234 ◽  
pp. 03003
Author(s):  
Jacek Hunicz ◽  
Maciej Mikulski ◽  
Henryk Komsta
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Fuel Efficiency ◽  
Pressure Rise ◽  
Gasoline Direct Injection ◽  
Combustion Control ◽  
Excessive Pressure ◽  
Compression Stroke ◽  
Load Regime ◽  
Homogeneous Charge

Homogeneous Charge Compression Ignition (HCCI) is a promising low temperature combustion technology for reciprocating engines that offers high fuel efficiency and extremely low exhaust emissions. However, combustion control should be improved and operating range should be widened for the technology to achieve production level. In this study an overview of different direct gasoline injection control approaches, applied to improve stability at low engine loads and to reduce pressure rise rates at high load regime, is presented. The tests are performed on a single-cylinder research engine operated in a negative valve overlap (NVO) mode for residual gasses trapping. The investigated direct injection schemes included: (i) fuel injection during the NVO period to improve mixture reactivity and take an advantage of exhaust-fuel reactions thermal effects, (ii) fuel injection during intake stroke to create homogeneous charge and (iii) late fuel injection during compression stroke to create stratified charge. The results showed that application of early NVO injection enables active control of combustion timing at nearly idle conditions. The late fuel injection, during the compression stroke, enabled mitigation of excessive pressure rise rates at high engine load regime.

Effects of Multi-Injection Mode on Diesel Homogeneous Charge Compression Ignition Combustion

2006 ◽  
Vol 129 (1) ◽  
pp. 230-238 ◽  
Author(s):  
Wanhua Su ◽  
Bin Liu ◽  
Hui Wang ◽  
Haozhong Huang
Keyword(s):  
Thermal Efficiency ◽  
Homogeneous Charge Compression Ignition ◽  
Fuel Injection ◽  
Direct Injection ◽  
Progressive Increase ◽  
Compression Ignition ◽  
Injection Mode ◽  
Hcci Combustion ◽  
Injection Modes ◽  
Homogeneous Charge

Early injection, well before top dead center (TDC), has perhaps been the most commonly investigated approach to obtain homogeneous charge compression ignition (HCCI) combustion in a direct-injection (DI) diesel engine. However, wall wetting due to overpenetration of the fuel spray can lead to unacceptable amounts of unburned fuel and removal of lubrication oil. Another difficulty of diesel HCCI combustion is the control of combustion phasing. In order to overcome these difficulties, a multipulse fuel injection technology has been developed for the purpose of organizing diesel HCCI combustion, by which the injection width, injection number, and the dwell time between two neighboring pulse injections can be flexibly regulated. In present paper, the effects of a series of multipulse injection modes realized based on the prejudgment of combustion requirement, on engine emissions, thermal efficiency, and cycle fuel energy distribution of diesel HCCI combustion are studied. The designed injection modes include so-called even mode, hump mode, and progressive increase mode, and each mode with five and six pulses, respectively. Engine test was conducted with these modes. The experimental results show that diesel HCCI combustion is extremely sensitive to multipulse injection modes and that thermal efficiency can be improved with carefully modulated ones. There are many modes that can reach near zero NOx and smoke emissions, but it is significant to be aware that multipulse injection mode must be carefully designed for higher thermal efficiency.

Sign in / Sign up

Export Citation Format

Share Document