A Theoretical Framework to Analyze Bend Testing of Soft Tissue

2006 ◽  
Vol 129 (1) ◽  
pp. 117-120 ◽  
Author(s):  
Mark A. Nicosia
Keyword(s):  
Soft Tissue ◽  
Energy Function ◽  
Strain Energy ◽  
Heart Valves ◽  
Finite Elasticity ◽  
Strain Energy Function ◽  
Element Model ◽  
Theoretical Framework ◽  
Radius Of Curvature ◽  
Bend Testing

It has been hypothesized that repetitive flexural stresses contribute to the fatigue-induced failure of bioprosthetic heart valves. Although experimental apparatuses capable of measuring the bending properties of biomaterials have been described, a theoretical framework to analyze the resulting data is lacking. Given the large displacements present in these bending experiments and the nonlinear constitutive behavior of most biomaterials, such a formulation must be based on finite elasticity theory. We present such a theory in this work, which is capable of fitting bending moment versus radius of curvature experimental data to an arbitrary strain energy function. A simple finite element model was constructed to study the validity of the proposed method. To demonstrate the application of the proposed approach, bend testing data from the literature for gluteraldehyde-fixed bovine pericardium were fit to a nonlinear strain energy function, which showed good agreement to the data. This method may be used to integrate bending behavior in constitutive models for soft tissue.

Application of Finite Elastic Theory to the Behavior of Rubberlike Materials

1963 ◽  
Vol 36 (5) ◽  
pp. 1459-1496 ◽  
Author(s):  
Paul J. Blatz
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Mechanical Response ◽  
Finite Elasticity ◽  
Strain Energy Function ◽  
Elastic Theory ◽  
Mechanical Parameters ◽  
Molecular Interpretation ◽  
Rubberlike Materials

Abstract A brief review of the theory of finite elasticity is presented. The theory is applied to the characterization of the mechanical response parameters of a polyurethan foam. The incorporation of compressibility and anisotropy effects into the strain energy function are discussed. An example of the behavior of a composite or filled foam is presented. Finally some of the problems associated with the molecular interpretation of mechanical parameters are discussed.

Mesoscale bounds in finite elasticity and thermoelasticity of random composites

2006 ◽  
Vol 462 (2068) ◽  
pp. 1167-1180 ◽  
Author(s):  
Z.F Khisaeva ◽  
M Ostoja-Starzewski
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Variational Principles ◽  
Finite Elasticity ◽  
Effective Strain ◽  
Strain Energy Function ◽  
Free Energy Function ◽  
Thermoelastic Effects ◽  
Thermoelastic Response ◽  
Strain Energy Functions

Under consideration is the problem of size and response of the Representative Volume Element (RVE) in the setting of finite elasticity of statistically homogeneous and ergodic random microstructures. Through the application of variational principles, a scale dependent hierarchy of strain energy functions (i.e. mesoscale bounds) is derived for the effective strain energy function of the RVE. In order to account for thermoelastic effects, the variational principles are first generalized, and then analogous bounds on the effective thermoelastic response are derived. It is also shown that, in contradiction to results obtained for random linear composites, the hierarchy on the effective strain energy function in nonlinear elasticity cannot be split into volumetric and isochoric terms, while the hierarchy on the effective free energy function cannot be divided into purely mechanical and thermal contributions.

Mechanical power and hyperelasticity

2017 ◽  
Author(s):  
David J. Steigmann
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Power ◽  
Elastic Materials ◽  
Cyclic Motion

This chapter covers the notion of hyperelasticity—the concept that stress is derived from a strain—energy function–by invoking an analogy between elastic materials and springs. Alternatively, it can be derived by invoking a work inequality; the notion that work is required to effect a cyclic motion of the material.

scholarly journals Modelling the Inflation and Elastic Instabilities of Rubber-Like Spherical and Cylindrical Shells Using a New Generalised Neo-Hookean Strain Energy Function

2021 ◽  
Author(s):  
Afshin Anssari-Benam ◽  
Andrea Bucchi ◽  
Giuseppe Saccomandi
Keyword(s):  
Experimental Data ◽  
Energy Function ◽  
Limit Point ◽  
Strain Energy ◽  
Cylindrical Shells ◽  
Strain Energy Function ◽  
Model Parameters ◽  
Wide Range ◽  
Cylindrical Tubes ◽  
Gent Model

AbstractThe application of a newly proposed generalised neo-Hookean strain energy function to the inflation of incompressible rubber-like spherical and cylindrical shells is demonstrated in this paper. The pressure ($P$ P ) – inflation ($\lambda $ λ or $v$ v ) relationships are derived and presented for four shells: thin- and thick-walled spherical balloons, and thin- and thick-walled cylindrical tubes. Characteristics of the inflation curves predicted by the model for the four considered shells are analysed and the critical values of the model parameters for exhibiting the limit-point instability are established. The application of the model to extant experimental datasets procured from studies across 19th to 21st century will be demonstrated, showing favourable agreement between the model and the experimental data. The capability of the model to capture the two characteristic instability phenomena in the inflation of rubber-like materials, namely the limit-point and inflation-jump instabilities, will be made evident from both the theoretical analysis and curve-fitting approaches presented in this study. A comparison with the predictions of the Gent model for the considered data is also demonstrated and is shown that our presented model provides improved fits. Given the simplicity of the model, its ability to fit a wide range of experimental data and capture both limit-point and inflation-jump instabilities, we propose the application of our model to the inflation of rubber-like materials.

Mechanical characterization of a woven multi-layered hyperelastic composite laminate under uniaxial loading

2021 ◽  
pp. 002199832110115
Author(s):  
Shaikbepari Mohmmed Khajamoinuddin ◽  
Aritra Chatterjee ◽  
MR Bhat ◽  
Dineshkumar Harursampath ◽  
Namrata Gundiah
Keyword(s):  
Composite Materials ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Tests ◽  
Stress Strain ◽  
Aerospace Applications ◽  
Envelope Material ◽  
The Individual ◽  
High Dielectric

We characterize the material properties of a woven, multi-layered, hyperelastic composite that is useful as an envelope material for high-altitude stratospheric airships and in the design of other large structures. The composite was fabricated by sandwiching a polyaramid Nomex® core, with good tensile strength, between polyimide Kapton® films with high dielectric constant, and cured with epoxy using a vacuum bagging technique. Uniaxial mechanical tests were used to stretch the individual materials and the composite to failure in the longitudinal and transverse directions respectively. The experimental data for Kapton® were fit to a five-parameter Yeoh form of nonlinear, hyperelastic and isotropic constitutive model. Image analysis of the Nomex® sheets, obtained using scanning electron microscopy, demonstrate two families of symmetrically oriented fibers at 69.3°± 7.4° and 129°± 5.3°. Stress-strain results for Nomex® were fit to a nonlinear and orthotropic Holzapfel-Gasser-Ogden (HGO) hyperelastic model with two fiber families. We used a linear decomposition of the strain energy function for the composite, based on the individual strain energy functions for Kapton® and Nomex®, obtained using experimental results. A rule of mixtures approach, using volume fractions of individual constituents present in the composite during specimen fabrication, was used to formulate the strain energy function for the composite. Model results for the composite were in good agreement with experimental stress-strain data. Constitutive properties for woven composite materials, combining nonlinear elastic properties within a composite materials framework, are required in the design of laminated pretensioned structures for civil engineering and in aerospace applications.

Viscohyperelastic Strain Energy Function

2017 ◽  
pp. 59-78 ◽  
Author(s):  
Arne Vogel ◽  
Lalao Rakotomanana ◽  
Dominique P. Pioletti
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function
Sign in / Sign up

Export Citation Format

Share Document