Lattice Boltzmann Method Simulation of Backward-Facing Step Flow With Double Plates Aligned at Angle to Flow Direction

2006 ◽  
Vol 128 (11) ◽  
pp. 1176-1184 ◽  
Author(s):  
Chao-Kuang Chen ◽  
Tzu-Shuang Yen ◽  
Yue-Tzu Yang
Keyword(s):  
Reynolds Number ◽  
Temperature Gradient ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Numerical Results ◽  
Field Synergy ◽  
Backward Facing Step ◽  
Number Range ◽  
Field Synergy Principle ◽  
Boltzmann Method

This study applies the lattice Boltzmann method (LBM) to simulate incompressible steady low Reynolds number backward-facing step flows. In order to restrict the simulations to two-dimensional flows, the investigated Reynolds number range is limited to a maximum value of Re=200. The field synergy principle is applied to demonstrate that the increased interruption within the fluid caused by the introduction of two inclined plates reduces the intersection angle between the velocity vector and the temperature gradient. The present results obtained for the velocity and temperature fields are found to be in good agreement with the published experimental and numerical results. Furthermore, the numerical results confirm the relationship between the velocity and temperature gradient predicted by the field synergy principle.

scholarly journals Application of lattice Boltzmann method and field synergy principle to the heat transfer analysis of channel flow with obstacles inside

2011 ◽  
Vol 15 (suppl. 1) ◽  
pp. 75-80
Author(s):  
Cheng-Chi Wang ◽  
Her-Terng Yau ◽  
Chien-Nan Lin ◽  
Po-Jen Cheng ◽  
Wei-Min Hung
Keyword(s):  
Heat Transfer ◽  
Velocity Field ◽  
Temperature Gradient ◽  
Lattice Boltzmann Method ◽  
Channel Flow ◽  
Lattice Boltzmann ◽  
Heat Transfer Analysis ◽  
Field Synergy ◽  
Field Synergy Principle ◽  
Boltzmann Method

In this paper the lattice Boltzmann method and field synergy principle are applied to simulate two-dimensional incompressible steady channel flow under low Reynolds number, and analyze the local influence on velocity field and temperature field caused by inserting cylinder obstacles of different cross-section. Furthermore, field synergy principle of elliptic flow type is applied to demonstrate that the increased interruption within the fluid increases the synergistic level between the velocity field and temperature gradient field. As the intersection angle between the velocity vector and the temperature gradient vector decreases by inserting cylinder obstacles to fluid field, the results of heat transfer will improve significantly.

scholarly journals Simulation of Boiling Heat Transfer at Different Reduced Temperatures with an Improved Pseudopotential Lattice Boltzmann Method

Symmetry ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1358
Author(s):  
Matheus dos Santos Guzella ◽  
Luiz Eduardo Czelusniak ◽  
Vinícius Pessoa Mapelli ◽  
Pablo Fariñas Alvariño ◽  
Gherhardt Ribatski ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Pool Boiling ◽  
Numerical Results ◽  
Boltzmann Method ◽  
Nucleation Growth

The pseudopotential Lattice Boltzmann Method has attracted much attention in the recent years for the simulation of boiling heat transfer. Many studies have been published recently for the simulation of the bubble cycle (nucleation, growth and departure from a heated surface). This paper puts forward two-dimensional simulations of bubble nucleation, growth and departure using an improved pseudopotential Lattice Boltzmann Model from the literature at different reduced temperatures, Tr=0.76 and Tr=0.86. Two different models using the Bhatnagar–Gross–Krook (BGK) and the Multiple-Relaxation-Time (MRT) collision operators with appropriate forcing schemes are used. The results for pool boiling show that the bubbles exhibit axial symmetry during growth and departure. Numerical results of departure diameter and release period for pool boiling are compared against empirical correlations from the literature by varying the gravitational acceleration. Reasonable agreement is observed. Nucleate boiling trends with heat flux are also captured by the simulations. Numerical results of flow boiling simulations are compared by varying the Reynolds number for both reduced temperatures with the MRT model. It was found that the departure diamenter and release period decreases with the increase of the Reynolds number. These results are a direct effect of the drag force. Proper conclusions are commented at the end of the paper.

Numerical Simulation of High Reynolds Number Flow Structure in a Lid-Driven Cavity Using MRT-LES

2014 ◽  
Vol 554 ◽  
pp. 665-669
Author(s):  
Leila Jahanshaloo ◽  
Nor Azwadi Che Sidik
Keyword(s):  
Reynolds Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Numerical Technique ◽  
Lattice Boltzmann Model ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Driven Cavity ◽  
Reynolds Number Flow ◽  
Boltzmann Method

The Lattice Boltzmann Method (LBM) is a potent numerical technique based on kinetic theory, which has been effectively employed in various complicated physical, chemical and fluid mechanics problems. In this paper multi-relaxation lattice Boltzmann model (MRT) coupled with a Large Eddy Simulation (LES) and the equation are applied for driven cavity flow at different Reynolds number (1000-10000) and the results are compared with the previous published papers which solve the Navier stokes equation directly. The comparisons between the simulated results show that the lattice Boltzmann method has the capacity to solve the complex flows with reasonable accuracy and reliability. Keywords: Two-dimensional flows, Lattice Boltzmann method, Turbulent flow, MRT, LES.

Numerical simulation of vapor bubble growth on a vertical superheated wall using lattice Boltzmann method

2015 ◽  
Vol 25 (5) ◽  
pp. 1214-1230 ◽  
Author(s):  
Tao Sun ◽  
Weizhong Li ◽  
Bo Dong
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Phase Change ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Nucleate Boiling ◽  
Numerical Results ◽  
Heat Transfer Mechanism ◽  
Content Type ◽  
Boltzmann Method

Purpose – The purpose of this paper is to test the feasibility of lattice Boltzmann method (LBM) for numerical simulation of nucleate boiling and transition boiling. In addition, the processes of nucleate and transition boiling on vertical wall are simulated. The heat transfer mechanism is discussed based on the evolution of temperature field. Design/methodology/approach – In this paper, nucleate boiling and transition boiling are numerically investigated by LBM. A lattice Boltzmann (LB) multiphase model combining with a LB thermal model is used to predict the phase-change process. Findings – Numerical results are in good agreement with existing experimental results. Numerical results confirm the feasibility of the hybrid LBM for direct simulations of nucleate and transition boiling. The data exhibit correct parametric dependencies of bubble departure diameter compared with experimental correlation and relevant references. Research limitations/implications – All the simulations are performed in two-dimensions in this paper. In the future work, the boiling process will be simulated in three-dimensional. Practical implications – This study demonstrated a potential model that can be applied to the investigation of phase change heat transfer, which is one of the effective techniques for enhance the heat transfer in engineering. The numerical results can be considered as a basic work or a reference for generalizing LB method in the practical application about nucleate boiling and transition boiling. Originality/value – The hybrid LBM is first used for simulation of nucleate and transition boiling on vertical surface. Heat transfer mechanism during boiling is discussed based on the numerical results.

scholarly journals Study on droplet nucleation position and jumping on structured hydrophobic surface using the lattice Boltzmann method

2021 ◽  
pp. 149-149
Author(s):  
Gaojie Liang ◽  
Lijun Liu ◽  
Haiqian Zhao ◽  
Cong Li ◽  
Nandi Zhang
Keyword(s):  
Lattice Boltzmann Method ◽  
Significant Influence ◽  
Lattice Boltzmann ◽  
Hydrophobic Surface ◽  
Numerical Results ◽  
Nucleation Mode ◽  
Droplet Nucleation ◽  
Simulation Results ◽  
The Individual ◽  
Boltzmann Method

In this study, droplet nucleation and jumping on the conical microstructure surface is simulated using the Lattice Boltzmann Method (LBM). The nucleation and jumping laws of the droplet on the surface are summarized. The numerical results suggest that the height and the gap of the conical microstructure exhibit a significant influence on the nucleation position of the droplet. When the ratio of height to the gap of the microstructure(H/D) is small, the droplet tends to nucleate at the bottom of the structure. Otherwise, the droplet tends to nucleate towards the side of the structure. The droplet grown in the side nucleation mode possesses better hydrophobicity than that of the droplet grown in the bottom nucleation mode and the droplet jumping becomes easier. Apart from the coalescence of the droplets jumping out of the surface, jumping of individual droplets may also occur under certain conditions. The ratio of the clearance to the width of the conical microstructure(D/F) depends on the jumping mode of the droplet. The simulation results indicate that when the D/F ratio is greater than 1.2, the coalescence jump of droplets is likely to occur. On the contrary, the individual jump of droplets is easy to occur.

THE JEFFERY-HAMEL PROBLEM: A NUMERICAL LATTICE-BOLTZMANN STUDY

2003 ◽  
Vol 17 (01n02) ◽  
pp. 139-143
Author(s):  
GÁBOR HÁZI ◽  
ISTVÁN FARKAS
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Bifurcation Theory ◽  
Numerical Study ◽  
Numerical Results ◽  
Point Of View ◽  
Boltzmann Method

In this paper, we present a numerical study of the Jeffery-Hammel problem using the lattice-Boltzmann method. We study three situations: pure inflow, pure outflow, and outflow with backflow. We demonstrate that the lattice-Boltzmann method gives not only qualitatively but also quantitatively accurate solutions for this problem. From the point of view of stability of the flow, the recent results of bifurcation theory are also briefly considered from the viewpoint of our numerical results.

Sign in / Sign up

Export Citation Format

Share Document