Overview of the New B&PV Code Section XII Transport Tank Rules

2005 ◽  
Vol 128 (4) ◽  
pp. 663-664
Author(s):  
Charles Becht
Keyword(s):  
Pressure Vessel ◽  
Pressure Vessels ◽  
Dangerous Goods ◽  
Transport Tank

The first edition of Section XII, “Rules for Construction and Continued Service of Transport Tanks,” was issued with the 2004 edition of the ASME Boiler and Pressure Vessel Code. Transport tanks are pressure vessels used for the transportation of dangerous goods via highway, rail, air or water. This paper provides an overview of the requirements of section XII.

Overview of the New B&PV Code Section XII Transport Tank Rules

2005 ◽  
Author(s):  
Charles Becht
Keyword(s):  
Pressure Vessel ◽  
Pressure Vessels ◽  
Dangerous Goods ◽  
Transport Tank

The first edition of Section XII, “Rules for Construction and Continued Service of Transport Tanks,” was issued with the 2004 edition of the ASME Boiler and Pressure Vessel Code. Transport tanks are pressure vessels used for the transportation of dangerous goods via highway, rail, air or water. This paper provides an overview of the requirements of Section XII.

The Applicability of the ASME Boiler and Pressure Vessel Code, Section XII, Transport Tanks, for Use in U.S. Federal Maritime Regulations

2010 ◽  
Author(s):  
Allen Selz ◽  
Daniel R. Sharp
Keyword(s):  
Pressure Vessel ◽  
Road Transport ◽  
Pressure Vessels ◽  
Department Of Transportation ◽  
The Road ◽  
Dangerous Goods ◽  
Division 1 ◽  
The Us ◽  
Section Viii ◽  
Marine Applications

Developed at the request of the US Department of Transportation, Section XII-Transport Tanks, of the ASME Boiler and Pressure Vessel Code addresses rules for the construction and continued service of pressure vessels for the transportation of dangerous goods by road, air, rail, or water. The standard is intended to replace most of the vessel design rules and be referenced in the federal hazardous material regulations, Title 49 of the Code of Federal Regulations (CFR). While the majority of the current rules focus on over-the-road transport, there are rules for portable tanks which can be used in marine applications for the transport of liquefied gases, and for ton tanks used for rail and barge shipping of chlorine and other compressed gases. Rules for non-cryogenic portable tanks are currently provided in Section VIII, Division 2, but will be moved into Section XII. These portable tank requirements should also replace the existing references to the outmoded 1989 edition of ASME Section VIII, Division 1 cited in Title 46 of the CFR. Paper published with permission.

Description of Rules of Section XII Transport Tank Code

2005 ◽  
Author(s):  
Mahendra D. Rana ◽  
Stanley Staniszewski ◽  
Stephen V. Voorhees
Keyword(s):  
Pressure Vessels ◽  
Dangerous Goods ◽  
Transport Tank ◽  
Broad Overview

ASME Section XII Transport Tank Code was published in July 2004. This newly developed Code which provides rules for construction and continued service of pressure vessels used in transportation of dangerous goods via highway, rail or water. This paper presents a broad overview of Section XII. The main topics included in the paper are: scope and general requirements, materials and design, and fabrication, inspection and testing requirements.

Stress Field Around a Large Opening in a Pressure Vessel During a Major Repair

2009 ◽  
Author(s):  
Erik Garrido ◽  
Euro Casanova
Keyword(s):  
Pressure Vessel ◽  
New Technologies ◽  
Mechanical Design ◽  
General Purpose ◽  
Pressure Vessels ◽  
Mechanical Equipment ◽  
Stress Distributions ◽  
Large Opening ◽  
Von Mises ◽  
Case Basis

It is a regular practice in the oil industry to modify mechanical equipment to incorporate new technologies and to optimize production. In the case of pressure vessels, it is occasionally required to cut large openings in their walls in order to have access to the interior part of the equipment for executing modifications. This cutting process produces temporary loads, which were obviously not considered in the original mechanical design. Up to now, there is not a general purpose specification for approaching the assessments of stress levels once a large opening in a vertical pressure vessel has been made. Therefore stress distributions around large openings are analyzed on a case-by-case basis without a reference scheme. This work studies the distribution of the von Mises equivalent stresses around a large opening in FCC Regenerators during internal cyclone replacement, which is a frequently required practice for this kind of equipment. A finite element parametric model was developed in ANSYS, and both numerical results and illustrating figures are presented.

Effect of Carbide Content on Temper Embrittlement of 2.25Cr1Mo Steel

2016 ◽  
Author(s):  
Yian Wang ◽  
Guoshan Xie ◽  
Zheng Zhang ◽  
Xiaolong Qian ◽  
Yufeng Zhou ◽  
...  
Keyword(s):  
High Temperature ◽  
Pressure Vessel ◽  
High Stress ◽  
Temper Embrittlement ◽  
Damage Mechanism ◽  
Pressure Vessels ◽  
Nondestructive Method ◽  
Operating Conditions ◽  
Low Alloy Steels ◽  
Carbide Content

Temper embrittlement is a common damage mechanism of pressure vessels in the chemical and petrochemical industry serviced in high temperature, which results in the reduction of roughness due to metallurgical change in some low alloy steels. Pressure vessels that are temper embrittled may be susceptible to brittle fracture under certain operating conditions which cause high stress by thermal gradients, e.g., during start-up and shutdown. 2.25Cr1-Mo steel is widely used to make hydrogenation reactor due to its superior combination of high mechanical strength, good weldability, excellent high temperature hydrogen attack (HTHA) and oxidation-resistance. However, 2.25Cr-1Mo steel is particularly susceptible to temper embrittlement. In this paper, the effect of carbide on temper embrittlement of 2.25Cr-1Mo steel was investigated. Mechanical properties and the ductile-brittle transition temperature (DBTT) of 2.25Cr-1Mo steel were measured by tensile test and impact test. The tests were performed at two positions (base metal and weld metal) and three states (original, step cooling treated and in-service for a hundred thousand hours). The content and distribution of carbides were analyzed by scanning electron microscope (SEM). The content of Cr and Mo elements in carbide was measured by energy dispersive X-ray analysis (EDS). The results showed that the embrittlement could increase the strength and reduce the plasticity. Higher carbide contents appear to be responsible for the higher DBTT. The in-service 2.25Cr-1Mo steel showed the highest DBTT and carbide content, followed by step cooling treated 2.25Cr-1Mo steel, while the as-received 2.25Cr-1Mo steel has the minimum DBTT and carbide content. At the same time, the Cr and Mo contents in carbide increased with the increasing of DBTT. It is well known that the specimen analyzed by SEM is very small in size, sampling SEM specimen is convenient and nondestructive to pressure vessel. Therefore, the relationship between DBTT and the content of carbide offers a feasible nondestructive method for quantitative measuring the temper embrittlement of 2.25Cr-1Mo steel pressure vessel.

A Study on Fatigue Life Evaluation of Pressure Vessel Made of ASME SA240-316L Material Using Numerical Analysis

2019 ◽  
Vol 893 ◽  
pp. 1-5 ◽  
Author(s):  
Eui Soo Kim
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Pressure Vessel ◽  
Life Prediction ◽  
Pressure Vessels ◽  
Physical Damage ◽  
Element Analysis ◽  
Internal Damage ◽  
Life Evaluation ◽  
Fatigue Life Evaluation

Pressure vessels are subjected to repeated loads during use and charging, which can causefine physical damage even in the elastic region. If the load is repeated under stress conditions belowthe yield strength, internal damage accumulates. Fatigue life evaluation of the structure of thepressure vessel using finite element analysis (FEA) is used to evaluate the life cycle of the structuraldesign based on finite element method (FEM) technology. This technique is more advanced thanfatigue life prediction that uses relational equations. This study describes fatigue analysis to predictthe fatigue life of a pressure vessel using stress data obtained from FEA. The life prediction results areuseful for improving the component design at a very early development stage. The fatigue life of thepressure vessel is calculated for each node on the model, and cumulative damage theory is used tocalculate the fatigue life. Then, the fatigue life is calculated from this information using the FEanalysis software ADINA and the fatigue life calculation program WINLIFE.

Fatigue and Burst Analysis of Hy-140(T) Steel Pressure Vessels

1970 ◽  
Vol 92 (1) ◽  
pp. 11-16 ◽  
Author(s):  
J. M. Barsom ◽  
S. T. Rolfe
Keyword(s):  
Yield Strength ◽  
Pressure Vessel ◽  
Low Cycle Fatigue ◽  
High Strength Steels ◽  
High Strength ◽  
Fatigue Tests ◽  
Pressure Vessels ◽  
High Yield ◽  
Corrosion Properties ◽  
Burst Analysis

Increasing use of high-strength steels in pressure-vessel design has resulted from emphasis on decreasing the weight of pressure vessels for certain applications. To demonstrate the suitability of a 140-ksi yield strength steel for use in unwelded pressure vessels, HY-140(T)—a quenched and tempered 5Ni-Cr-Mo-V steel—was fabricated and subjected to various burst and fatigue tests, as well as to various laboratory tests. In general, results of the investigation indicated very good tensile, Charpy, Nil Ductility Transition Temperature (NDT), low-cycle fatigue, and stress-corrosion properties of HY-140(T) steels, as well as very good burst tests results, in comparison with existing high-yield strength pressure-vessel steels. The results also indicate that the HY-140(T) steel should be an excellent material for its originally designed purpose, Naval hull applications.

Failure Probability Assessment for a Boiling Water Reactor Pressure Vessel Under Low Temperature Over-Pressure Event

2012 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang ◽  
Bo-Yi Chen ◽  
Hsien-Chou Lin ◽  
Ru-Feng Liu
Keyword(s):  
Low Temperature ◽  
Failure Probability ◽  
Pressure Vessel ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Reactor Pressure Vessel ◽  
Boiling Water ◽  
Boiling Water Reactor ◽  
Water Reactor ◽  
Reactor Pressure

The fracture probability of a boiling water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been numerically analyzed using an advanced version of ORNL’s FAVOR code. First, a model of the vessel beltline region, which includes all shell welds and plates, is built for the FAVOR code based on the plant specific parameters of the reactor pressure vessel. Then, a novel flaw model which describes the flaw types of surface breaking flaws, embedded weld flaws and embedded plate flaws are simulated along both inner and outer vessel walls. When conducting the fracture probability analyses, a transient low temperature over-pressure event, which has previously been shown to be the most severe challenge to the integrity of boiling water reactor pressure vessels, is considered as the loading condition. It is found that the fracture occurs in the fusion-line area of axial welds, but with only an insignificant failure probability. The low through-wall cracking frequency indicates that the analyzed reactor pressure vessel maintains sufficient stability until either the end-of-license or for doubling of the present license of operation.

The Fatigue Analysis of Pressure Vessels Based on Workbench

2012 ◽  
Vol 550-553 ◽  
pp. 3082-3087
Author(s):  
Xing Ye Su ◽  
Qin Li ◽  
Hong Mei Wang
Keyword(s):  
Fatigue Failure ◽  
Chemical Industry ◽  
Pressure Vessel ◽  
Petrochemical Industry ◽  
Rapid Development ◽  
Fatigue Analysis ◽  
Pressure Vessels ◽  
Operation Condition ◽  
Key Steps

With the rapid development of petrochemical industry, the operation condition of pressure vessels under the alternating load was increasing and the probability of fatigue failure was also on the rise. As a result, pressure vessel fatigue analysis is gaining the designer's attention. This paper describes the key steps and techniques of the fatigue analysis of pressure vessel based on Workbench platform using the lock hopper of the coal chemical industry as an example.

A Study of Nozzles in Pressure Vessels under Pressure Fatigue Loading

1967 ◽  
Vol 182 (1) ◽  
pp. 657-684 ◽  
Author(s):  
J. Spence ◽  
W. B. Carlson
Keyword(s):  
Fatigue Life ◽  
Mild Steel ◽  
Pressure Vessel ◽  
Special Interest ◽  
Maximum Stress ◽  
Fatigue Loading ◽  
Fatigue Tests ◽  
Pressure Vessels ◽  
Full Size

Nozzles in cylindrical vessels have been of special interest to designers for some time and have offered a field of activity for many research workers. This paper presents some static and fatigue tests on five designs of full size pressure vessel nozzles manufactured in two materials. Supporting and other published work is reviewed showing that on the basis of the same maximum stress mild steel vessels give the same fatigue life as low alloy vessels. When compared on the basis of current codes it is shown that mild steel vessels may have five to ten times the fatigue life of low alloy vessels unless special precautions are taken.

Sign in / Sign up

Export Citation Format

Share Document