Effect of Unglazed Transpired Collector on the Performance of a Polycrystalline Silicon Photovoltaic Module

2006 ◽  
Vol 128 (3) ◽  
pp. 349-353 ◽  
Author(s):  
A. T. Naveed ◽  
E. C. Kang ◽  
E. J. Lee
Keyword(s):  
Polycrystalline Silicon ◽  
Electrical Power ◽  
Heating System ◽  
Photovoltaic Module ◽  
Forced Ventilation ◽  
Pv System ◽  
Pv Module ◽  
Pv Modules ◽  
Typical Day ◽  
Electrical Output

The electrical power generated by a polycrystalline silicon photovoltaic (PV) module mounted on an unglazed transpired solar collector (UTC) has been studied and compared to that of a PV module without UTC for a quantitative analysis of electrical output and its role in reducing the simple payback periods of photovoltaic electrical systems. A 75W polycrystalline silicon PV module was fixed on an UTC in front of the ventilation fan, and effectiveness of cooling by means of the forced ventilation at the rate of 160CFM was monitored. The temperature reduction under forced ventilation was in the range of 3-9°C with a 5% recovery in the electrical output power on a typical day of the month of February 2005. The simulated and measured electrical power outputs are in reasonable agreement with root-mean-square error of 2.40. The life cycle assessment of a hypothetical PV system located at Daejeon, South Korea and consisting of 3kW PV modules fixed on a 50m2 UTC shows that with a possible reduction of 3-9°C in the operating temperatures, the system requires three 75W fewer PV modules. The simple payback period of PV system is reduced from 23yearsto15years when integrated into an UTC air heating system.

scholarly journals Thermal Modeling of Opaque and Semi-Transparent Photovoltaic (PV) Module

2019 ◽  
Vol 8 (12) ◽  
pp. 3271-3276
Keyword(s):  
Solar Cell ◽  
Energy Requirement ◽  
Electrical Power ◽  
Electrical Energy ◽  
Photovoltaic Module ◽  
Performance Parameters ◽  
Cell Temperature ◽  
Pv System ◽  
Electrical Efficiency ◽  
Pv Module

Photovoltaic (PV) module is one of the simplest technologies to convert the solar energy into the useful electrical energy. In the present paper, an attempt has been made to develop a simplified analytical expression for solar cell temperature and solar cell electrical efficiency of opaque and semi-transparent photovoltaic module in the terms of design and climatic parameters. Based on the energy balance of opaque and semi-transparent PV module, the performance parameters, namely, solar cell temperature, solar cell electrical efficiency, module efficiency and electrical power output have been evaluated for a typical clear day of May month of New Delhi climatic condition data taken from IMD (Indian Meteorological Department), Pune, India. The numerical simulations have been made on the MATLAB software. Based on the numerical computation, the effect of back cover opaque and semitransparent tedlar of module on the performance parameters has been investigated. From the results and discussion, it is found that the performance of photovoltaic module is very sensitive to the module temperature. Further, it is concluded that the semi-transparent photovoltaic module is more efficient than the opaque one. Thus, by the application of semi-transparent PV module in the design of stand-alone and rooftop PV system, the overall energy requirement and performance can be improved for same occupied area.

Uncertainty Estimates of Photovoltaic Module Performance Measurements

Solar Energy ◽  
2003 ◽  
Author(s):  
Gobind H. Atmaram
Keyword(s):  
The United States ◽  
Laboratory Accreditation ◽  
Photovoltaic Module ◽  
Certification Program ◽  
Performance Measurements ◽  
Pv System ◽  
Testing Laboratory ◽  
Pv Module ◽  
Uncertainty Estimates ◽  
Pv Modules

Commercially available photovoltaic (PV) modules and systems often fall short of meeting the performance ratings specified by the module manufacturers or system designers [1]. This has resulted in reduced performance and low system availability, some system failures, and generally, a lack of confidence by systems users. Hence, a need for an independent accredited laboratory to conduct the testing and certification of PV modules and systems has been indicated by the PV industry, electric utilities, and other system users and owners. To meet this industry and user need, the Florida Solar Energy Center (FSEC) has started a PV testing and certification program. The FSEC PV testing laboratory and certification program have been accredited by the American Association for Laboratory Accreditation (A2LA) and approved by the PowerMark Corporation (PMC, www.powermark.org ), which is the certification body of the PV industry in the United States. The FSEC program currently covers three areas: (i) PV module power rating certification, (ii) Stand-Alone PV system performance evaluation and certification, and (iii) Grid-Connected PV system design review and approval. The PV module power rating certification is central to these three areas of the FSEC program, as illustrated in Figure 1. The details of the FSEC PV testing laboratory accreditation and certification program are described in a previous paper [2].

scholarly journals Efficiency Enhancement of Photovoltaic Module Using An Aluminum Foam Matrix Filled With Phase Change Material (PCM) Under Hot Climate Conditions

2021 ◽  
Author(s):  
Mohamed Sharaf ◽  
Mohamed S. Yousef ◽  
Ahmed Huzayyin
Keyword(s):  
Aluminum Foam ◽  
Electrical Power ◽  
Open Circuit ◽  
Photovoltaic Module ◽  
Pv System ◽  
Average Cell ◽  
Climate Conditions ◽  
Pv Module ◽  
Hot Climate ◽  
Hot Weather

Abstract In the present work, a passive cooling strategy combining an aluminium foam matrix (AFM) with PCM was employed to regulate the temperature of a photovoltaic (PV) system The comparison between three PV modules was established ,the first one was conventional without any changes ,the second one was PV combined with PCM (PV-PCM) and the last one was PV combined with modified PCM which contain an aluminum foam matrix embedded in it (PV-PCM/AFM).Outdoor experiments were carried out in the hot weather of Benha, Egypt, which is situated at latitude 30.466° North and longitude 31.185° East. A comparison of the three PV designs was given and analysed, based on PV surface temperature, PCM temperature, open-circuit voltage, output power generated, and electrical efficiency. It was observed that using composite PCM resulted in better heat absorption from the PV module and better temperature distribution inside the PCM enclosure. Furthermore, the results indicated that against the unmodified PV system, the average cell’s temperature in the PV-PCM system was dropped by 13.3% and its electrical power was enhanced by 9%. Meanwhile, the average cell temperature in the PV-PCM/AFM configuration was reduced by 21.6% while the enhancement of the electrical power was at 14%. Furthermore, the findings demonstrated that, as compared to unmodified PCM, AFM impregnation accelerated the melting of modified PCM by roughly 37%.

Performansi aktual modul photovoltaik dengan pengarah matahari

2018 ◽  
Vol 12 (2) ◽  
pp. 98 ◽  
Author(s):  
Jalaluddin . ◽  
Baharuddin Mire
Keyword(s):  
Solar Radiation ◽  
Local Time ◽  
Performance Characteristic ◽  
Electrical Energy ◽  
Photovoltaic Module ◽  
Experiment Data ◽  
Actual Performance ◽  
Pv Module ◽  
Solar Tracking ◽  
Pv Modules

Actual performance of photovoltaic module with solar tracking is presented. Solar radiation can be converted into electrical energy using photovoltaic (PV) modules. Performance of polycristalline silicon PV modules with and without solar tracking are investigated experimentally. The PV module with dimension 698 x 518 x 25 mm has maximum power and voltage is 45 Watt and 18 Volt respectively. Based on the experiment data, it is concluded that the performance of PV module with solar tracking increases in the morning and afternoon compared with that of fixed PV module. It increases about 18 % in the morning from 10:00 to 12:00 and in the afternoon from 13:30 to 14:00 (local time). This study also shows the daily performance characteristic of the two PV modules. Using PV module with solar tracking provides a better performance than fixed PV module. 

scholarly journals A Study of the Electrical Output and Reliability Characteristics of the Crystalline Photovoltaic Module According to the Front Materials

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 163
Author(s):  
Jong Rok Lim ◽  
Woo Gyun Shin ◽  
Chung Geun Lee ◽  
Yong Gyu Lee ◽  
Young Chul Ju ◽  
...  
Keyword(s):  
Surface Film ◽  
Front Surface ◽  
Photovoltaic System ◽  
Photovoltaic Module ◽  
Reliability Test ◽  
Tempered Glass ◽  
Characteristic Analysis ◽  
Pv Module ◽  
Reliability Characteristics ◽  
Electrical Output

In recent years, various types of installations such as floating photovoltaic (PV) and agri-voltaic systems, and BIPV (building integrated photovoltaic system) have been implemented in PV systems and, accordingly, there is a growing demand for new PV designs and materials. In particular, in order to install a PV module in a building, it is important to reduce the weight of the module. The PV module in which low-iron, tempered glass is applied to the front surface, which is generally used, has excellent electrical output and reliability characteristics; however, it is heavy. In order to reduce the weight of the PV module, it is necessary to use a film or plastic-based material, as opposed to low-iron, tempered glass, on the front surface. However, if a material other than glass is used on the front of the PV module, various problems such as reduced electrical output and reduced reliability may occur. Therefore, in this paper, a PV module using a film instead of glass as the front surface was fabricated, and a characteristic analysis and reliability test were conducted. First, the transmittance and UV characteristics of each material were tested, and one-cell and 24-cell PV modules were fabricated and tested for electrical output and reliability. From the results, it was found that the transmittance and UV characteristics of the front material were excellent. In addition, the electrical output and reliability test results confirmed that the front-surface film was appropriate for use in a PV module.

scholarly journals Feasibility Study of the Technical and Economic Performance of Grid-Connected PV System for Selected Rooftops in UTHM

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Mohamad Fakrie Mohamad Ali ◽  
◽  
Mohd Noor Abdullah ◽  
Keyword(s):  
Feasibility Study ◽  
Crystalline Silicon ◽  
Electricity Consumption ◽  
Payback Period ◽  
Net Energy ◽  
Pv System ◽  
Pv Module ◽  
Electricity Bill ◽  
Pv Modules ◽  
Energy Metering

This paper presents the feasibility study of the technical and economic performances of grid-connected photovoltaic (PV) system for selected rooftops in Universiti Tun Hussein Onn Malaysia (UTHM). The analysis of the electricity consumption and electricity bill data of UTHM campus show that the monthly electricity usage in UTHM campus is very high and expensive. The main purpose of this project is to reduce the annual electricity consumption and electricity bill of UTHM with Net Energy Metering (NEM) scheme. Therefore, the grid-connected PV system has been proposed at Dewan Sultan Ibrahim (DSI), Tunku Tun Aminah Library (TTAL), Fakulti Kejuruteraan Awam dan Alam Bina (FKAAS) and F2 buildings UTHM by using three types of PV modules which are mono-crystalline silicon (Mono-Si), poly-crystalline silicon (Poly-Si) and Thin-film. These three PV modules were modeled, simulated and calculated using Helioscope software with the capacity of 2,166.40kWp, 2,046.20kWp and 1,845kWp respectively for the total rooftop area of 190,302.9 ft². The economic analysis was conducted on the chosen three installed PV modules using RETScreen software. As a result, the Mono-Si showed the best PV module that can produce 2,332,327.40 kWh of PV energy, 4.4% of CO₂ reduction, 9.3 years of payback period considering 21 years of the contractual period and profit of RM4,932,274.58 for 11.7 years after payback period. Moreover, the proposed installation of 2,166.40kWp (Mono-SI PV module) can reduce the annual electricity bill and CO2 emission of 3.6% (RM421,561.93) and 4.4% (1,851.40 tCO₂) compared to the system without PV system.

scholarly journals Modeling of Photovoltaic Module Using the MATLAB

2019 ◽  
Vol 9 ◽  
pp. 59-69
Author(s):  
Alok Dhaundiyal ◽  
Divine Atsu
Keyword(s):  
Standard Test ◽  
Electrical Performance ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Pv Module ◽  
Proposed Model ◽  
Current Voltage ◽  
Pv Modules ◽  
The Impact ◽  
The Mathematical Model

This paper presents the modeling and simulation of the characteristics and electrical performance of photovoltaic (PV) solar modules. Genetic coding is applied to obtain the optimized values of parameters within the constraint limit using the software MATLAB. A single diode model is proposed, considering the series and shunt resistances, to study the impact of solar irradiance and temperature on the power-voltage (P-V) and current-voltage (I-V) characteristics and predict the output of solar PV modules. The validation of the model under the standard test conditions (STC) and different values of temperature and insolation is performed, as well as an evaluation using experimentally obtained data from outdoor operating PV modules. The obtained results are also subjected to comply with the manufacturer’s data to ensure that the proposed model does not violate the prescribed tolerance range. The range of variation in current and voltage lies in the domain of 8.21 – 8.5 A and 22 – 23 V, respectively; while the predicted solutions for current and voltage vary from 8.28 – 8.68 A and 23.79 – 24.44 V, respectively. The measured experimental power of the PV module estimated to be 148 – 152 W is predicted from the mathematical model and the obtained values of simulated solution are in the domain of 149 – 157 W. The proposed scheme was found to be very effective at determining the influence of input factors on the modules, which is difficult to determine through experimental means.

scholarly journals Practical Performance Analysis of a Bifacial PV Module and System

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4389
Author(s):  
Juhee Jang ◽  
Kyungsoo Lee
Keyword(s):  
Short Circuit ◽  
Rear Surface ◽  
Short Circuit Current ◽  
Specific Yield ◽  
Rear Side ◽  
Pv System ◽  
Pv Module ◽  
Pv Modules ◽  
Pm 10 ◽  
Sky Conditions

Bifacial photovoltaic (PV) modules can take advantage of rear-surface irradiance, enabling them to produce more energy compared with monofacial PV modules. However, the performance of bifacial PV modules depends on the irradiance at the rear side, which is strongly affected by the installation setup and environmental conditions. In this study, we experiment with a bifacial PV module and a bifacial PV system by varying the size of the reflective material, vertical installation, temperature mismatch, and concentration of particulate matter (PM), using three testbeds. From our analyses, we found that the specific yield increased by 1.6% when the reflective material size doubled. When the PV module was installed vertically, the reduction of power due to the shadow effect occurred, and thus the maximum current was 14.3% lower than the short-circuit current. We also observed a maximum average surface temperature mismatch of 2.19 °C depending on the position of the modules when they were composed in a row. Finally, in clear sky conditions, when the concentration of PM 10 changed by 100 µg/m3, the bifacial gain increased by 4%. In overcast conditions, when the concentration of PM 10 changed by 100 µg/m3, the bifacial gain decreased by 0.9%.

scholarly journals ANALYSIS AND SIMULATION OFF-GRID PV PANELS BY USING MATLAB / SIMULINK ENVIRONMENT

2021 ◽  
pp. 97-105
Author(s):  
L. M. Abdali ◽  
H. A. Issa ◽  
Q. A. Ali ◽  
V. V. Kuvshinov ◽  
E. A. Bekirov
Keyword(s):  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Test System ◽  
Photovoltaic System ◽  
Photovoltaic Module ◽  
Operating Modes ◽  
Pv Module ◽  
Pv Modules ◽  
Generating System

The use of renewable energy sources and in particular solar energy has received considerable attention in recent decades. Photovoltaic (PV) energy projects are being implemented in very large numbers in many countries. Many research projects are carried out to analyze and verify the performance of PV modules. Implementing a pilot plant for a photovoltaic power system with a DC / DC converter to test system performance is not always possible due to practical limitations. The software simulation model helps to analyze the performance of PV modules, and more useful would be a general circuit model that can be used to test any commercial PV module. This paper presents a simulation of a mathematical model of a photovoltaic module that boosts a DC / AC converter and also simulates the operating modes of a solar generating system at various load characteristics. The model presented in this article can be used as a generalized PV module to analyze the performance of any commercially available PV module. In the presented work, the parameters that affect the performance of the generating system were investigated. The results were obtained for the operation of DC/AC photoelectric converters. The presented characteristics strongly depend on such parameters as solar insolation, the temperature of the working surface of the photovoltaic module, the charge-discharge time of storage batteries, etc. When one of the values ​​of these parameters changes, the operating modes of the solar power generating battery change. Changing the operating modes can lead to malfunctions of the entire operation of the system, therefore, it is necessary to control all the energy characteristics of the installation. The actions proposed in this work aimed at studying the operation of the photovoltaic system and the energy storage system, as well as the use of the necessary auxiliary devices for monitoring and controlling the parameters of the installation, are capable of achieving an increase in the efficiency of the generation of the system. The studies carried out in the course of the presented work make it possible to increase the level of knowledge on the control and management of the parameters of photovoltaic generating plants and expand the possibilities of their uninterrupted operation and increase energy production.

scholarly journals Thermographic and electrical characterization of a photovoltaic panel under partial shading conditions: a case study

ACTA IMEKO ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 93
Author(s):  
Giovanni Bucci ◽  
Fabrizio Ciancetta ◽  
Edoardo Fiorucci ◽  
Antonio Delle Femine
Keyword(s):  
Electrical Characterization ◽  
Testing Procedure ◽  
Pv System ◽  
Partial Shading ◽  
Photovoltaic Panel ◽  
Pv Module ◽  
Pv Modules ◽  
Consequent Reduction

<p class="Abstract">Shading is one of the most critical factors that produces a reduction in power in photovoltaic (PV) modules. The main causes of shading are related to cloud cover; local specificity; natural characteristics; building and other civil works; and the presence of the PV system itself. A reduction in overall radiation produces a consequent reduction in electric power. Another more problematic effect is associated with the partial shading of the PV modules. The shaded cell behaves as a load, dissipating energy and increasing its temperature. This effect can involve irreversible changes to the PV module, with a decrease in performance that can even cause the destruction of the shaded cell.</p><p>The main aim of this work is the development of a testing procedure for the performance evaluation of commercial PV modules in the presence of partial shading on one cell. Tests were carried out using thermographic and electric measurements and by varying the shading levels according to IEC standards. Shading up to total darkening is achieved by means of a number of filters that reduce the direct solar irradiance.</p><p>As a case study, a complete characterisation of a 180 Wp polycrystalline PV module was performed according to the proposed testing procedure, showing that high temperatures can be measured on the shaded PV module surface even if only 50 % of the surface of one cell of the PV module is darkened.</p>

Sign in / Sign up

Export Citation Format

Share Document