Eulerian-Eulerian Modeling of Disperse Two-Phase Flow in a Gas-Liquid Cylindrical Cyclone

2005 ◽  
Vol 128 (4) ◽  
pp. 832-837 ◽  
Author(s):  
Miguel A. Reyes-Gutiérrez ◽  
Luis R. Rojas-Solórzano ◽  
Juan C. Marín-Moreno ◽  
Antonio J. Meléndez-Ramírez ◽  
José Colmenares
Keyword(s):  
Gas Flow ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Momentum Equation ◽  
Surface Shape ◽  
Phase Flow ◽  
Atmospheric Conditions ◽  
Two Phase ◽  
Cylindrical Cyclone

This work presents a three-dimensional computational fluid dynamics (CFD) study of a two-phase flow field in a gas-liquid cylindrical cyclone (GLCC) using CFX4.3™, a commercial code based on the finite volume method. The numerical analysis was made for air-water mixtures at near atmospheric conditions, while both liquid and gas flow rates were changed. The two-phase flow behavior is modeled using an Eulerian-Eulerian approach, considering both phases as an interpenetrating continuum. This method computed the inter-phase phenomena by including a source term in the momentum equation to consider the drag between the liquid and gas phases. The gas phase is modeled as a bimodal bubble size distribution to allow for the presence of free- and entrapment gas, simultaneously. The results (free surface shape and liquid angular velocity) show a reasonable match with experimental data. The CFD technique here proposed demonstrates to satisfactorily reproduce angular velocities of the phases and their spatial distribution inside the GLCC. Computed results also proved to be useful in forecasting bubble and droplet trajectories, from which gas carry under (GCU) and liquid carry over might be estimated. Nevertheless, moderate differences found between the computed GCU and experimental measurements suggest that new adjustments may be done to the numerical model to improve its accuracy.

Eulerian-Eulerian Modeling of Disperse Two-Phase Flow in a Gas-Liquid Cylindrical Cyclone

2004 ◽  
Author(s):  
Miguel A. Reyes-Gutie´rrez ◽  
Luis R. Rojas-Solo´rzano ◽  
Jose´ Colmenares ◽  
Juan C. Mari´n-Moreno ◽  
Antonio J. Mele´ndez-Rami´rez
Keyword(s):  
Gas Flow ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Momentum Equation ◽  
Surface Shape ◽  
Phase Flow ◽  
Atmospheric Conditions ◽  
Two Phase ◽  
Cylindrical Cyclone

This work presents a three-dimensional CFD study of a two-phase flow field in a Gas-Liquid Cylindrical Cyclone (GLCC) using CFX4.3™, a commercial code based on the finite volume method. The numerical analysis was made for air-water mixtures at near atmospheric conditions, while both liquid and gas flow rates were changed. The two-phase flow behavior is modeled using an Eulerian-Eulerian approach, considering both phases as an interpenetrating continuum. This method computed the inter-phase phenomena by including a source term in the momentum equation to consider the drag between the liquid and gas phases. The gas phase is modeled as a bimodal bubble size distribution to allow for the presence of free- and entrapment gas, simultaneously. The results (free surface shape and liquid angular velocity) show a reasonable match with experimental data. The CFD technique here proposed, demonstrates to satisfactorily reproduce angular velocities of the phases and their spatial distribution inside the GLCC. Computed results also proved to be useful in forecasting bubble and droplet trajectories, from which gas carry under (GCU) and liquid carry over (LCO) might be estimated. Nevertheless, moderate differences found between the computed GCU and experimental measurements, suggests that new adjustments may be done to the numerical model to improve its accuracy.

Gradient-Augmented Level Set Two-Phase Flow Method With Pretreated Reinitialization for Three-Dimensional Violent Sloshing

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Jianjian Xin ◽  
Fulong Shi ◽  
Qiu Jin ◽  
Lin Ma
Keyword(s):  
Free Surface ◽  
Level Set ◽  
Two Phase Flow ◽  
Three Dimensional ◽  
Surface Shape ◽  
Phase Flow ◽  
Two Phase ◽  
Correction Technique ◽  
Highly Nonlinear ◽  
Violent Sloshing

Abstract A three-dimensional (3D) gradient-augmented level set (GALS) two-phase flow model with a pretreated reinitialization procedure is developed to simulate violent sloshing in a cuboid tank. Based on a two-dimensional (2D) GALS method, 3D Hermite, and 3D Lagrange polynomial schemes are derived to interpolate the level set function and the velocity field at arbitrary positions over a cell, respectively. A reinitialization procedure is performed on a 3D narrow band to treat the strongly distorted interface and improve computational efficiency. In addition, an identification-correction technique is proposed and incorporated into the reinitialization procedure to treat the tiny droplet which can distort the free surface shape, even lead to computation failure. To validate the accuracy of the present GALS method and the effectiveness of the proposed identification-correction technique, a 3D velocity advection case is first simulated. The present method is validated to have better mass conservation property than the classical level set and original GALS methods. Also, distorted and thin interfaces are well captured on all grid resolutions by the present GALS method. Then, sloshing under coupled surge and sway excitation, sloshing under rotational excitation are simulated. Good agreements are obtained when the present wave and pressure results are compared with the experimental and numerical results. In addition, the highly nonlinear free surface is observed, and the relationship between the excitation frequency and the impulsive pressure is investigated.

Compressibility Effects in the Gas Phase for Unsteady Annular Two-Phase Flow in a Microchannel

2006 ◽  
Author(s):  
Alexandru Herescu ◽  
Jeffrey S. Allen
Keyword(s):  
Shock Wave ◽  
Gas Phase ◽  
High Speed ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Flow Section ◽  
Phase Flow ◽  
Two Phase ◽  
Gas Liquid Flow

High speed microscopy experiments investigating two-phase (gas-liquid) flow behavior in capillary-scale systems, that is, systems where capillary forces are important relative to gravitational forces, have revealed a unique unsteady annular flow with periodic destabilization of the gas-liquid interface. Standing waves develop on the liquid film and grow into annular lobes similar with those observed in low-speed two-phase flow. The leading face of the lobe will decelerate and suddenly become normal to the wall of the capillary, suggesting the possibility of a shock wave in the gas phase at a downstream location from the minimum gas flow section. Visualization of the naturally occurring convergent-divergent nozzle-like structures as well as a discussion on the possibility of shock wave formation are presented.

scholarly journals Preliminary Results of Numerical Simulation of Slug Flow in a Regular T-Junction

2018 ◽  
Vol 225 ◽  
pp. 03001
Author(s):  
Minh Tran ◽  
Zeeshan Memon ◽  
William Pao ◽  
Fakhruldin M Hashim
Keyword(s):  
Slug Flow ◽  
Two Phase Flow ◽  
Separation Efficiency ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Piping System ◽  
Phase Flow ◽  
Two Phase ◽  
Ansys Fluent ◽  
System A

Excessive liquid carryover in T-junction due to splitting nature of two-phase flow causes serious issues in piping system. A three-dimensional numerical model is employed to investigate two-phase flow split behavior of slug flow in a circular-section regular T-junction with 0.0752 m diameter. The Volume of Fraction method combined with k-ε turbulence model and initial sinusoidal perturbation in ANSYS FLUENT is adopted to characterize the effect of slug flow behavior on the phase separation efficiency. The preliminary result reveals that the simulation work can study slug flow split in great detail and the slug characteristic plays an important role in understanding split behavior.

The influence of the Stokes and Archimedes forces on the stability of a two-phase flow

2003 ◽  
Vol 3 ◽  
pp. 266-270
Author(s):  
B.H. Khudjuyerov ◽  
I.A. Chuliev
Keyword(s):  
Spectral Method ◽  
Stability Region ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Solid Phase ◽  
Stability Characteristic ◽  
Phase Flow ◽  
Two Phase ◽  
The Stability

The problem of the stability of a two-phase flow is considered. The solution of the stability equations is performed by the spectral method using polynomials of Chebyshev. A decrease in the stability region gas flow with the addition of particles of the solid phase. The analysis influence on the stability characteristic of Stokes and Archimedes forces.

Upward Vertical Two-Phase Flow Through an Annulus—Part II: Modeling Bubble, Slug, and Annular Flow

1992 ◽  
Vol 114 (1) ◽  
pp. 14-30 ◽  
Author(s):  
E. F. Caetano ◽  
O. Shoham ◽  
J. P. Brill
Keyword(s):  
Flow Pattern ◽  
Annular Flow ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Bubble Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Through ◽  
Physical Phenomena ◽  
Good Agreement

Mechanistic models have been developed for each of the existing two-phase flow patterns in an annulus, namely bubble flow, dispersed bubble flow, slug flow, and annular flow. These models are based on two-phase flow physical phenomena and incorporate annulus characteristics such as casing and tubing diameters and degree of eccentricity. The models also apply the new predictive means for friction factor and Taylor bubble rise velocity presented in Part I. Given a set of flow conditions, the existing flow pattern in the system can be predicted. The developed models are applied next for predicting the flow behavior, including the average volumetric liquid holdup and the average total pressure gradient for the existing flow pattern. In general, good agreement was observed between the experimental data and model predictions.

A Combined Eulerian and Lagrangian Method for Prediction of Evaporating Sprays

2002 ◽  
Vol 124 (3) ◽  
pp. 481-488 ◽  
Author(s):  
M. Burger ◽  
G. Klose ◽  
G. Rottenkolber ◽  
R. Schmehl ◽  
D. Giebert ◽  
...  
Keyword(s):  
Two Phase Flow ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Lagrangian Method ◽  
Phase Flow ◽  
Two Phase Flows ◽  
Two Phase ◽  
Lagrangian Methods ◽  
Eulerian Method ◽  
Lagrangian Modeling

Polydisperse sprays in complex three-dimensional flow systems are important in many technical applications. Numerical descriptions of sprays are used to achieve a fast and accurate prediction of complex two-phase flows. The Eulerian and Lagrangian methods are two essentially different approaches for the modeling of disperse two-phase flows. Both methods have been implemented into the same computational fluid dynamics package which is based on a three-dimensional body-fitted finite volume method. Considering sprays represented by a small number of droplet starting conditions, the Eulerian method is clearly superior in terms of computational efficiency. However, with respect to complex polydisperse sprays, the Lagrangian technique gives a higher accuracy. In addition, Lagrangian modeling of secondary effects such as spray-wall interaction enhances the physical description of the two-phase flow. Therefore, in the present approach the Eulerian and the Lagrangian methods have been combined in a hybrid method. The Eulerian method is used to determine a preliminary solution of the two-phase flow field. Subsequently, the Lagrangian method is employed to improve the accuracy of the first solution using detailed sets of initial conditions. Consequently, this combined approach improves the overall convergence behavior of the simulation. In the final section, the advantages of each method are discussed when predicting an evaporating spray in an intake manifold of an internal combustion engine.

Sign in / Sign up

Export Citation Format

Share Document