Differential Transformation Approach for Free Vibration Analysis of a Centrifugally Stiffened Timoshenko Beam

2005 ◽  
Vol 128 (2) ◽  
pp. 170-175 ◽  
Author(s):  
C. Mei
Keyword(s):  
Free Vibration ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Variable Coefficients ◽  
Mode Shapes ◽  
Governing Equations ◽  
Transformation Technique ◽  
Differential Transformation ◽  
Transformation Approach

In this paper, the differential transformation approach is applied to analyze the free vibration of centrifugally stiffened Timoshenko beam structures. Such structures involve variable coefficients in the governing equations, which in general cannot be solved analytically in closed form. Both the natural frequencies and the mode shapes are obtained using the differential transformation technique. Numerical examples are presented and results are compared with available results in the literature.

Free Vibration Analysis of an Inflated Toroidal Shell

2002 ◽  
Vol 124 (3) ◽  
pp. 387-396 ◽  
Author(s):  
Akhilesh K. Jha ◽  
Daniel J. Inman ◽  
Raymond H. Plaut
Keyword(s):  
Differential Equations ◽  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Circular Cross Section ◽  
Free Vibration Analysis ◽  
Longitudinal Direction ◽  
Variable Coefficients ◽  
Mode Shapes ◽  
Toroidal Shell

Free vibration analysis of a free inflated torus of circular cross-section is presented. The shell theory of Sanders, including the effect of pressure, is used in formulating the governing equations. These partial differential equations are reduced to ordinary differential equations with variable coefficients using complete waves in the form of trigonometric functions in the longitudinal direction. The assumed mode shapes are divided into symmetric and antisymmetric groups, each given by a Fourier series in the meridional coordinate. The solutions (natural frequencies and mode shapes) are obtained using Galerkin’s method and verified with published results. The natural frequencies are also obtained for a circular cylinder with shear diaphragm boundary condition as a special case of the toroidal shell. Finally, the effects of aspect ratio, pressure, and thickness on the natural frequencies of the inflated torus are studied.

Dynamic characteristics of horizontally curved bridges

2017 ◽  
Vol 24 (19) ◽  
pp. 4465-4483 ◽  
Author(s):  
Mohsen Amjadian ◽  
Anil K Agrawal
Keyword(s):  
Free Vibration ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Response Spectrum ◽  
Translational Motion ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Curved Bridges ◽  
Horizontally Curved ◽  
Horizontally Curved Bridges

Horizontally curved bridges have complicated dynamic characteristics because of their irregular geometry and nonuniform mass and stiffness distributions. This paper aims to develop a simplified and practical method for the calculation of the natural frequencies and mode shapes of horizontally curved bridges that would be of interest to bridge engineers for the estimation of the seismic response of these types of bridges. For this purpose, a simple three-degree-of-freedom (3DOF) dynamic model for free vibration equation of this type of bridge has been developed. It is shown that the translational motion of the deck of horizontally curved bridges in the direction that is perpendicular to their axis of symmetry is always coupled with the rotational motion of the deck, regardless of the location of the stiffness center. The model is further exploited to develop closed-form formulas for the estimation of the maximum displacements of the corners of the deck of one-way asymmetric horizontally curved bridges. The accuracy of the model is verified by finite-element model of a horizontally curved bridge prototype in OpenSEES. Finally, the model is utilized to study the influence of the location of the stiffness center with respect to the deck curvature center on the natural frequency and the maximum displacements of the corners of the deck for different curvatures of the deck. The results of free vibration analysis show that the natural frequencies of one-way asymmetric horizontally curved bridges, in general, increase with the increase of the subtended angle of the deck. The results of earthquake response spectrum analysis show that the increase in the subtended angle of one-way asymmetric horizontally curved bridges decreases the radial displacements of the corners of the deck but increases the azimuthal displacement. These two responses both increase with the increase in the distance between the stiffness center and the curvature center.

Free Vibration Analysis of a Carbon Nanotube Reinforced Composite Beam

2014 ◽  
Vol 592-594 ◽  
pp. 2041-2045 ◽  
Author(s):  
B. Naresh ◽  
A. Ananda Babu ◽  
P. Edwin Sudhagar ◽  
A. Anisa Thaslim ◽  
R. Vasudevan
Keyword(s):  
Carbon Nanotube ◽  
Free Vibration ◽  
Composite Beam ◽  
Natural Frequencies ◽  
Equations Of Motion ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Element Formulation ◽  
Reinforced Composite ◽  
Vibration Responses

In this study, free vibration responses of a carbon nanotube reinforced composite beam are investigated. The governing differential equations of motion of a carbon nanotube (CNT) reinforced composite beam are presented in finite element formulation. The validity of the developed formulation is demonstrated by comparing the natural frequencies evaluated using present FEM with those of available literature. Various parametric studies are also performed to investigate the effect of aspect ratio and percentage of CNT content and boundary conditions on natural frequencies and mode shapes of a carbon nanotube reinforced composite beam. It is shown that the addition of carbon nanotube in fiber reinforced composite beam increases the stiffness of the structure and consequently increases the natural frequencies and alter the mode shapes.

scholarly journals Phononic Band Gap and Free Vibration Analysis of Fluid-Conveying Pipes with Periodically Varying Cross-Section

2021 ◽  
Vol 11 (21) ◽  
pp. 10485
Author(s):  
Hao Yu ◽  
Feng Liang ◽  
Yu Qian ◽  
Jun-Jie Gong ◽  
Yao Chen ◽  
...  
Keyword(s):  
Free Vibration ◽  
Band Gap ◽  
Cross Section ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Critical Parameters ◽  
Mode Shapes ◽  
Beam Model ◽  
The Impact ◽  
Fluid Conveying Pipes

Phononic crystals (PCs) are a novel class of artificial periodic structure, and their band gap (BG) attributes provide a new technical approach for vibration reduction in piping systems. In this paper, the vibration suppression performance and natural properties of fluid-conveying pipes with periodically varying cross-section are investigated. The flexural wave equation of substructure pipes is established based on the classical beam model and traveling wave property. The spectral element method (SEM) is developed for semi-analytical solutions, the accuracy of which is confirmed by comparison with the available literature and the widely used transfer matrix method (TMM). The BG distribution and frequency response of the periodic pipe are attained, and the natural frequencies and mode shapes are also obtained. The effects of some critical parameters are discussed. It is revealed that the BG of the present pipe system is fundamentally induced by the geometrical difference of the substructure cross-section, and it is also related to the substructure length and fluid–structure interaction (FSI). The number of cells does not contribute to the BG region, while it has significant effects on the amplitude attenuation, higher order natural frequencies and mode shapes. The impact of FSI is more evident for the pipes with smaller numbers of cells. Moreover, compared with the conventional TMM, the present SEM is demonstrated more effective for comprehensive analysis of BG characteristics and free vibration of PC dynamical structures.

scholarly journals UNCOUPLED VIBRATIONS IN FUNCTIONALLY GRADED TIMOSHENKO BEAM

2016 ◽  
Vol 54 (6) ◽  
pp. 785 ◽  
Author(s):  
Nguyen Tien Khiem ◽  
Nguyen Ngoc Huyen
Keyword(s):  
Free Vibration ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Flexural Vibration ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Power Law Distribution ◽  
Material Parameters ◽  
Flexural Vibrations ◽  
Fgm Beam

Free vibration of FGM Timoshenko beam is investigated on the base of the power law distribution of FGM. Taking into account the actual position of neutral plane enables to obtain general condition for uncoupling of axial and flexural vibrations in FGM beam. This condition defines a class of functionally graded beams for which axial and flexural vibrations are completely uncoupled likely to the homogeneous beams. Natural frequencies and mode shapes of uncoupled flexural vibration of beams from the class are examined in dependence on material parameters and slendernes

scholarly journals Improved Riccati Transfer Matrix Method for Free Vibration of Non-Cylindrical Helical Springs Including Warping

2012 ◽  
Vol 19 (6) ◽  
pp. 1167-1180 ◽  
Author(s):  
A.M. Yu ◽  
Y. Hao
Keyword(s):  
Free Vibration ◽  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Axial Deformation ◽  
Cross Sectional ◽  
Helical Springs

Free vibration equations for non-cylindrical (conical, barrel, and hyperboloidal types) helical springs with noncircular cross-sections, which consist of 14 first-order ordinary differential equations with variable coefficients, are theoretically derived using spatially curved beam theory. In the formulation, the warping effect upon natural frequencies and vibrating mode shapes is first studied in addition to including the rotary inertia, the shear and axial deformation influences. The natural frequencies of the springs are determined by the use of improved Riccati transfer matrix method. The element transfer matrix used in the solution is calculated using the Scaling and Squaring method and Pad'e approximations. Three examples are presented for three types of springs with different cross-sectional shapes under clamped-clamped boundary condition. The accuracy of the proposed method has been compared with the FEM results using three-dimensional solid elements (Solid 45) in ANSYS code. Numerical results reveal that the warping effect is more pronounced in the case of non-cylindrical helical springs than that of cylindrical helical springs, which should be taken into consideration in the free vibration analysis of such springs.

In-Plane Free Vibration of Uniform Circular Arches Made of Axially Functionally Graded Materials

2019 ◽  
Vol 19 (08) ◽  
pp. 1950084 ◽  
Author(s):  
Joon Kyu Lee ◽  
Byoung Koo Lee
Keyword(s):  
Free Vibration ◽  
Young’S Modulus ◽  
Natural Frequencies ◽  
Dynamic Equilibrium ◽  
Young's Modulus ◽  
Mass Density ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Governing Equations ◽  
Direct Integral

This study focused on the in-plane free vibration of uniform circular arches made of axially functionally graded (AFG) materials. Based on the dynamic equilibrium of an arch element, the governing equations for the free vibration of an AFG arch are derived in this study, where arbitrary functions for the Young’s modulus and mass density are acceptable. For the purpose of numerical analysis, quadratic polynomials for the Young’s modulus and mass density are considered. To calculate the natural frequencies and corresponding mode shapes, the governing equations are solved using the direct integral method enhanced by the trial eigenvalue method. For verification purposes, the predicted frequencies are compared to those obtained by the general purpose software ADINA. A parametric study of the end constraint, rotatory inertia, modular ratio, radius parameter, and subtended angle for the natural frequencies is conducted and the corresponding mode shapes are reported.

scholarly journals Wave Based Method for Free Vibration Analysis of Ring Stiffened Cylindrical Shell with Intermediate Large Frame Ribs

2013 ◽  
Vol 20 (3) ◽  
pp. 459-479 ◽  
Author(s):  
Meixia Chen ◽  
Jianhui Wei ◽  
Kun Xie ◽  
Naiqi Deng ◽  
Guoxiang Hou
Keyword(s):  
Cylindrical Shell ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Structure Type ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Arbitrary Boundary ◽  
Stiffened Cylindrical Shell

Wave based method which can be recognized as a semi-analytical and semi-numerical method is presented to analyze the free vibration characteristics of ring stiffened cylindrical shell with intermediate large frame ribs for arbitrary boundary conditions. According to the structure type and the positions of discontinuities, the model is divided into different substructures whose vibration field is expanded by wave functions which are exactly analytical solutions to the governing equations of the motions of corresponding structure type. Boundary conditions and continuity equations between different substructures are used to form the final matrix to be solved. Natural frequencies and vibration mode shapes are calculated by wave based method and the results show good agreement with finite element method for clamped-clamped, shear diaphragm – shear diaphragm and free-free boundary conditions. Free vibration characteristics of ring stiffened cylindrical shells with intermediate large frame ribs are compared with those with bulkheads and those with all ordinary ribs. Effects of the size, the number and the distribution of intermediate large frame rib are investigated. The frame rib which is large enough is playing a role as bulkhead, which can be considered imposing simply supported and clamped constraints at one end of the cabin and dividing the cylindrical shell into several cabins vibrating separately at their own natural frequencies.

Free Vibration Analysis of Rotating Tapered Bresse-Rayleigh Beams Using the Differential Transformation Method

2009 ◽  
Author(s):  
Dominic R. Jackson ◽  
S. Olutunde Oyadiji
Keyword(s):  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Slenderness Ratio ◽  
Free Vibration Analysis ◽  
Transformation Method ◽  
Differential Transformation Method ◽  
Algebraic Equations ◽  
Differential Transformation ◽  
Rayleigh Beam

The free vibration characteristics of a rotating tapered Rayleigh beam is analysed in this study. First, the strain-displacement relationship for the rotating beam is formulated and used to derive the kinetic and strain energies in explicit analytical form. Second, Hamilton’s variational principle is used to derive the governing differential equation of motion and the associated boundary conditions. Third, the Differential Transformation Method (DTM) is applied to reduce the governing differential equations of motion and the boundary conditions to a set of algebraic equations from which the frequency equation is derived. Next, a numerical algorithm implemented in the software package Mathematica is used to compute the natural frequencies of vibration for a few paired combinations of clamped, pinned and free end conditions of the beam. Also, the variation of the natural frequencies of vibration with respect to variations in the rotational speed, hub radius, taper ratio and the slenderness ratio is studied. The results obtained from the Bresse-Rayleigh theory are compared with results obtained from the Bernoulli-Euler and Timoshenko theories to demonstrate the accuracy and relevance of their application.

Free vibration analysis of partially connected parallel beams with elastically restrained ends

2016 ◽  
Vol 230 (16) ◽  
pp. 2851-2864 ◽  
Author(s):  
Alborz Mirzabeigy ◽  
Reza Madoliat
Keyword(s):  
Free Vibration ◽  
Natural Frequencies ◽  
Flexural Rigidity ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Computational Stability ◽  
Transform Method ◽  
Practical Engineering ◽  
Elastically Restrained ◽  
Connection Length

In the present paper, the problem of transverse free vibration of two parallel beams partially connected to each other by a Winkler-type elastic layer is investigated. Euler–Bernoulli beam hypothesis has been applied, and translational and rotational elastic springs in each end considered as support. The motion of the system is described by coupled, piece-wise differential equations. The differential transform method (DTM) is employed to derive natural frequencies and mode shapes. DTM is a semi-analytical approach based on Taylor expansion series which does not require any admissible functions and yields rapid convergence and computational stability. After validation of the DTM results with results reported by well-known references and finite elements solution, the influences of the inner layer connection length, boundary conditions, the coefficient of elastic inner layer and ratio of beam’s flexural rigidity on natural frequencies as well as influences of the inner layer connection length on mode shapes are discussed. This problem is treated for the first time, and results are completely new which candidate them to being considered for practical engineering applications.

Sign in / Sign up

Export Citation Format

Share Document