Level-Set Computations of Free Surface Rotational Flows

2005 ◽  
Vol 127 (6) ◽  
pp. 1111-1121 ◽  
Author(s):  
Giuseppina Colicchio ◽  
Maurizio Landrini ◽  
John R. Chaplin
Keyword(s):  
Free Surface ◽  
Numerical Method ◽  
Level Set ◽  
Stokes Equations ◽  
Vertical Surface ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Two Fluids ◽  
Level Set Function ◽  
Rotational Flows

A numerical method is developed for modeling the violent motion and fragmentation of an interface between two fluids. The flow field is described through the solution of the Navier-Stokes equations for both fluids (in this case water and air), and the interface is captured by a Level-Set function. Particular attention is given to modeling the interface, where most of the numerical approximations are made. Novel features are that the reintialization procedure has been redefined in cells crossed by the interface; the density has been smoothed across the interface using an exponential function to obtain an equally stiff variation of the density and of its inverse; and we have used an essentially non-oscillatory scheme with a limiter whose coefficients depend on the distance function at the interface. The results of the refined scheme have been compared with those of the basic scheme and with other numerical solvers, with favorable results. Besides the case of the vertical surface-piercing plate (for which new laboratory measurements were carried out) the numerical method is applied to problems involving a dam-break and wall-impact, the interaction of a vortex with a free surface, and the deformation of a cylindrical bubble. Promising agreement with other sources of data is found in every case.

Simulation of Wave-Body Interaction Using a Single-Phase Level Set Function in the SWENSE Method

2013 ◽  
Author(s):  
Gabriel Reliquet ◽  
Aurélien Drouet ◽  
Pierre-Emmanuel Guillerm ◽  
Erwan Jacquin ◽  
Lionel Gentaz ◽  
...  
Keyword(s):  
Free Surface ◽  
Level Set Method ◽  
Level Set ◽  
Single Phase ◽  
Stokes Equations ◽  
Flow Theory ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Level Set Function ◽  
Set Function

The purpose of this paper is to present combination of the SWENSE (Spectral Wave Explicit Navier-Stokes Equations – [1]) method — an original method to treat fully nonlinear wave-body interactions — and a free surface RANSE (Reynolds Averaged Navier-Stokes Equations) solver using a single-phase Level Set method to capture the interface. The idea is to be able to simulate wave-body interactions under viscous flow theory with strong deformations of the interface (wave breaking in the vicinity of the body, green water on ship decks…), while keeping the advantages of the SWENSE scheme. The SWENSE approach is based on a physical decomposition by combining incident waves described by a nonlinear spectral scheme based on potential flow theory and an adapted Navier-Stokes solver where only the diffracted part of the flow is solved, incident flow parameters seen as forcing terms. In the single-phase Level Set method [2, 3], the air phase is neglected. Thus, only the liquid phase is solved considering a fluid with uniform properties. The location of the free surface is determined by a Level Set function initialised as the signed distance. The accuracy of simulation depends essentially on the pressure scheme used to impose free surface dynamic boundary condition. Comparisons of numerical results with experimental and numerical data for US navy combatant DTMB 5415 in calm water and in head waves are presented.

scholarly journals A SEMI-IMPLICIT SCHEME FOR SOLVING INCOMPRESSIBLE VISCOUS FREE SURFACE FLOWS

2005 ◽  
Vol 4 (2) ◽  
Author(s):  
C. M. Oishi ◽  
J. A. Cuminato ◽  
V. G. Ferreira ◽  
M. F. Tomé ◽  
A. Castelo ◽  
...  
Keyword(s):  
Free Surface ◽  
Numerical Method ◽  
Stokes Equations ◽  
Free Surface Flows ◽  
Numerical Results ◽  
Navier Stokes ◽  
Variable Order ◽  
Navier Stokes Equations ◽  
Reynolds Number Flow ◽  
The Stability

The present work is concerned with a numerical method for solving the two-dimensional time-dependent incompressible Navier-Stokes equations in the primitive variables formulation. The diffusive terms are treated by Implicit Backward and Crank-Nicolson methods, and the non-linear convection terms are, explicitly, approximated by the high order upwind VONOS (Variable-Order Non-Oscillatory Scheme) scheme. The boundary conditions for the pressure field at the free surface are treated implicitly, and for the velocity field explicitly. The numerical method is then applied to the simulation of free surface and confined flows. The numerical results show that the present technique eliminates the stability restriction in the original explicit method. For low Reynolds number flow dynamics, the method is robust and produces numerical results that compare very well with the analytical solutions.

scholarly journals A SEMI-IMPLICIT SCHEME FOR SOLVING INCOMPRESSIBLE VISCOUS FREE SURFACE FLOWS

2005 ◽  
Vol 4 (2) ◽  
pp. 106
Author(s):  
C. M. Oishi ◽  
J. A. Cuminato ◽  
V. G. Ferreira ◽  
M. F. Tomé ◽  
A. Castelo ◽  
...  
Keyword(s):  
Free Surface ◽  
Numerical Method ◽  
Stokes Equations ◽  
Free Surface Flows ◽  
Numerical Results ◽  
Navier Stokes ◽  
Variable Order ◽  
Navier Stokes Equations ◽  
Reynolds Number Flow ◽  
The Stability

The present work is concerned with a numerical method for solving the two-dimensional time-dependent incompressible Navier-Stokes equations in the primitive variables formulation. The diffusive terms are treated by Implicit Backward and Crank-Nicolson methods, and the non-linear convection terms are, explicitly, approximated by the high order upwind VONOS (Variable-Order Non-Oscillatory Scheme) scheme. The boundary conditions for the pressure field at the free surface are treated implicitly, and for the velocity field explicitly. The numerical method is then applied to the simulation of free surface and confined flows. The numerical results show that the present technique eliminates the stability restriction in the original explicit method. For low Reynolds number flow dynamics, the method is robust and produces numerical results that compare very well with the analytical solutions.

Mathematical modeling of steady stratified flows

2003 ◽  
Vol 3 ◽  
pp. 195-207
Author(s):  
A.M. Ilyasov ◽  
V.N. Kireev ◽  
S.F. Urmancheev ◽  
I.Sh. Akhatov
Keyword(s):  
Stokes Equations ◽  
Approximate Model ◽  
Immiscible Liquid ◽  
Stratified Flows ◽  
Navier Stokes ◽  
Flat Channel ◽  
Navier Stokes Equations ◽  
Two Fluids ◽  
Flow Parameters ◽  
Direct Numerical Solution

The work is devoted to the analysis of the flow of immiscible liquid in a flat channel and the creation of calculation schemes for determining the flow parameters. A critical analysis of the well-known Two Fluids Model was carried out and a new scheme for the determination of wall and interfacial friction, called the hydraulic approximation in the theory of stratified flows, was proposed. Verification of the proposed approximate model was carried out on the basis of a direct numerical solution of the Navier–Stokes equations for each fluid by a finite-difference method with phase-boundary tracking by the VOF (Volume of Fluid) method. The graphical dependencies illustrating the change in the interfase boundaries of liquids and the averaged over the occupied area of the phase velocities along the flat channel are presented. The results of comparative calculations for two-fluid models are also given, according to the developed model in the hydraulic approximation and direct modeling. It is shown that the calculations in accordance with the hydraulic approximation are more consistent with the simulation results. Thus, the model of hydraulic approximation is the most preferred method for calculating stratified flows, especially in cases of variable volumetric content of liquids.

scholarly journals Numerical Modeling of the Motion and Interaction of a Droplet of an Inkjet Printing Process with a Flat Surface

2021 ◽  
Vol 11 (2) ◽  
pp. 527
Author(s):  
Tim Tofan ◽  
Harald Kruggel-Emden ◽  
Vytautas Turla ◽  
Raimondas Jasevičius
Keyword(s):  
Level Set ◽  
Stokes Equations ◽  
Field Method ◽  
Phase Field Method ◽  
Navier Stokes ◽  
Stable Form ◽  
Fluid Interface ◽  
Velocity Change ◽  
Navier Stokes Equations ◽  
Inkjet Printhead

The numerical simulation and analysis of the ejection of an ink droplet through a nozzle as well its motion through air until its contact with a surface and taking up of a stable form is performed. The fluid flow is modeled by the incompressible Navier–Stokes equations with added surface tension. The presented model can be solved using either a level set or a phase field method to track the fluid interface. Here, the level set method is used to determinate the interface between ink and air. The presented work concentrates on the demonstration how to check the suitability of ink for inkjet printhead nozzles, for instance, for the use in printers. The results such as velocity, change of size, and volume dependence on time of an ink droplet are presented. Recommendations for the use of specific inks are also given.

Simulation of the Gap Resonance Between Two Rectangular Barges in Regular Waves by a Free Surface Viscous Flow Solver

2013 ◽  
Author(s):  
B. Elie ◽  
G. Reliquet ◽  
P.-E. Guillerm ◽  
O. Thilleul ◽  
P. Ferrant ◽  
...  
Keyword(s):  
Experimental Data ◽  
Free Surface ◽  
Viscous Flow ◽  
Stokes Equations ◽  
Resonance Phenomenon ◽  
Navier Stokes ◽  
Regular Waves ◽  
Navier Stokes Equations ◽  
Flow Solver ◽  
Gap Resonance

This paper compares numerical and experimental results in the study of the resonance phenomenon which appears between two side-by-side fixed barges for different sea-states. Simulations were performed using SWENSE (Spectral Wave Explicit Navier-Stokes Equations) approach and results are compared with experimental data on two fixed barges with different headings and bilges. Numerical results, obtained using the SWENSE approach, are able to predict both the frequency and the magnitude of the RAO functions.

NUMERICAL SOLUTIONS OF 2D AND 3D SLAMMING PROBLEMS

2021 ◽  
Vol 153 (A2) ◽  
Author(s):  
Q Yang ◽  
W Qiu
Keyword(s):  
Free Surface ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
The Body ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
2D And 3D

Slamming forces on 2D and 3D bodies have been computed based on a CIP method. The highly nonlinear water entry problem governed by the Navier-Stokes equations was solved by a CIP based finite difference method on a fixed Cartesian grid. In the computation, a compact upwind scheme was employed for the advection calculations and a pressure-based algorithm was applied to treat the multiple phases. The free surface and the body boundaries were captured using density functions. For the pressure calculation, a Poisson-type equation was solved at each time step by the conjugate gradient iterative method. Validation studies were carried out for 2D wedges with various deadrise angles ranging from 0 to 60 degrees at constant vertical velocity. In the cases of wedges with small deadrise angles, the compressibility of air between the bottom of the wedge and the free surface was modelled. Studies were also extended to 3D bodies, such as a sphere, a cylinder and a catamaran, entering calm water. Computed pressures, free surface elevations and hydrodynamic forces were compared with experimental data and the numerical solutions by other methods.

Sign in / Sign up

Export Citation Format

Share Document