Experimental Investigation of the Aerothermal Performance of a High Blockage Rib-Roughened Cooling Channel

2005 ◽  
Vol 127 (3) ◽  
pp. 580-588 ◽  
Author(s):  
Luca Casarsa ◽  
Tony Arts
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Flow Field ◽  
Three Dimensional ◽  
Heat Transfer Process ◽  
Cooling Channel ◽  
Complex Flow ◽  
Turbine Blade Cooling ◽  
Flow Features ◽  
Rib Roughened

The present study deals with a detailed experimental investigation of the turbulent flow inside a rib-roughened turbine blade cooling channel. The measurements are carried out in a stationary straight channel with high blockage ribs installed on one wall. The main objective is to enhance the understanding and deepen the analysis of this complex flow field with the help of highly resolved particle image velocimetry measurements. A quasi-three-dimensional view of the flow field is achieved, allowing the identification of the main time-averaged coherent structures. The combined analysis of the present aerodynamic results with available heat transfer data emphasizes the role of the mean and fluctuating flow features in the heat transfer process. In particular, the stream wise/normal to the wall component of the Reynolds stress tensor is shown to be strictly related to the heat transfer rate on the channel surfaces. A correlation to estimate the heat transfer field from the aerodynamic data is presented for the high blockage rib roughened channel flow.

Aero-Thermal Investigation of a Rib-Roughened Trailing Edge Channel With Crossing-Jets: Part I—Flow Field Analysis

2008 ◽  
Author(s):  
Alessandro Armellini ◽  
Filippo Coletti ◽  
Tony Arts ◽  
Christophe Scholtes
Keyword(s):  
Flow Field ◽  
Computational Study ◽  
Three Dimensional ◽  
Side Wall ◽  
Field Analysis ◽  
Trailing Edge ◽  
Present Contribution ◽  
Numerical Predictions ◽  
Flow Features ◽  
Rib Roughened

The present contribution addresses the aero-thermal experimental and computational study of a trapezoidal cross-section model simulating a trailing edge cooling cavity with one rib-roughened wall. The flow is fed through tilted slots on one side wall and exits through straight slots on the opposite side wall. The flow field aerodynamics is investigated in part I of the paper. The reference Reynolds number is defined at the entrance of the test section and set at 67500 for all the experiments. A qualitative flow model is deduced from surface-streamline flow visualizations. Two-dimensional Particle Image Velocimetry measurements are performed in several planes around mid-span of the channel and recombined to visualize and quantify three-dimensional flow features. The jets issued from the tilted slots are characterized and the jet-rib interaction is analyzed. Attention is drawn to the motion of the flow deflected by the rib-roughened wall and impinging on the opposite smooth wall. The experimental results are compared with the numerical predictions obtained from the finite volume, RANS solver CEDRE.

Effect of Coriolis and Centrifugal Forces on Turbulence and Heat Transfer at High Rotation and Buoyancy Numbers in a Rib-Roughened Internal Cooling Channel

2004 ◽  
Author(s):  
A. K. Sleiti ◽  
J. S. Kapat
Keyword(s):  
Heat Transfer ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Internal Cooling ◽  
Cooling Channel ◽  
Centrifugal Forces ◽  
Reynolds Stresses ◽  
Rsm Model ◽  
Density Ratios ◽  
Rib Roughened

Prediction of three-dimensional flow field and heat transfer in a two pass rib-roughened square internal cooling channel of turbine blades with rounded staggered ribs rotating at high rotation and density ratios is the main focus of this study. Rotation, buoyancy, ribs, and geometry affect the flow within these channels. The full two-pass channel with bend and with rounded staggered ribs with fillets (e/Dh = 0.1 and P/e = 10) as tested by Wagner et. al [1992] is investigated. RSM is used in this study and enhanced wall treatment approach to resolve the near wall viscosity-affected region. RSM model was validated against available experimental data (which are primarily at low rotation and buoyancy numbers). The model was then used for cases with high rotational numbers (0.24, 0.475, 0.74 and 1) and high-density ratios (0.13, 0.23, and 0.3). Particular attention is given to how secondary flow, Reynolds stresses, turbulence intensity, and heat transfer are affected by coriolis and buoyancy/centrifugal forces caused by high levels of rotation and density ratios. A linear correlation for 4-side-average Nusselt number as a function of rotation number is derived.

Characterization of the Velocity and Heat Transfer Fields in an Internal Cooling Channel With High Blockage Ratio

2002 ◽  
Author(s):  
Luca Casarsa ◽  
Murat C¸akan ◽  
Tony Arts
Keyword(s):  
Heat Transfer ◽  
Flow Direction ◽  
Numerical Code ◽  
Internal Cooling ◽  
Blockage Ratio ◽  
Cooling Channel ◽  
Mean Flow ◽  
Turbine Blade Cooling ◽  
Image Velocimetry ◽  
Flow Features

The present experimental study is dealing with a detailed aero/thermal investigation of the turbulent flow inside a rib-roughened turbine blade cooling channel by means of Particle Image Velocimetry (PIV) and Liquid Crystal Thermometry (LCT). The main objectives of the paper are to provide detailed information about the behaviour of such a complicated flow, useful for its understanding, and to create a wide and reliable data base for numerical code validation. The measurements are carried out at engine representative Reynolds number within a scaled up model of a stationary straight cooling channel, with turbulent promoters (or ribs) installed on one wall. The ribs have an angle of attack of 90 deg with respect to the “mean” flow direction; their blockage ratio is equal to 30%. Detailed wall heat transfer distributions are presented. The main time-averaged flow features are identified and quantified; a number of rms characteristics are put in evidence and compared to the heat transfer distributions.

Fundamental Issues and Recent Advancements in Analysis of Aircraft Brake Natural Convective Cooling

1998 ◽  
Vol 120 (4) ◽  
pp. 840-857 ◽  
Author(s):  
M. P. Dyko ◽  
K. Vafai
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Flow Field ◽  
Three Dimensional ◽  
Convective Cooling ◽  
Cooling Flow ◽  
Physical Mechanisms ◽  
Braking System ◽  
Flow And Heat Transfer ◽  
Convection Cooling

A heightened awareness of the importance of natural convective cooling as a driving factor in design and thermal management of aircraft braking systems has emerged in recent years. As a result, increased attention is being devoted to understanding the buoyancy-driven flow and heat transfer occurring within the complex air passageways formed by the wheel and brake components, including the interaction of the internal and external flow fields. Through application of contemporary computational methods in conjunction with thorough experimentation, robust numerical simulations of these three-dimensional processes have been developed and validated. This has provided insight into the fundamental physical mechanisms underlying the flow and yielded the tools necessary for efficient optimization of the cooling process to improve overall thermal performance. In the present work, a brief overview of aircraft brake thermal considerations and formulation of the convection cooling problem are provided. This is followed by a review of studies of natural convection within closed and open-ended annuli and the closely related investigation of inboard and outboard subdomains of the braking system. Relevant studies of natural convection in open rectangular cavities are also discussed. Both experimental and numerical results obtained to date are addressed, with emphasis given to the characteristics of the flow field and the effects of changes in geometric parameters on flow and heat transfer. Findings of a concurrent numerical and experimental investigation of natural convection within the wheel and brake assembly are presented. These results provide, for the first time, a description of the three-dimensional aircraft braking system cooling flow field.

Computational and Experimental Study of Enhanced Laminar Flow Heat Transfer in Three-Dimensional Sinusoidal Wavy-Plate-Fin Channels

2003 ◽  
Author(s):  
Jiehai Zhang ◽  
Arun Muley ◽  
Joseph B. Borghese ◽  
Raj M. Manglik
Keyword(s):  
Heat Transfer ◽  
Flow Behavior ◽  
Computational Simulation ◽  
Three Dimensional ◽  
Heat Fluxes ◽  
Staggered Grid ◽  
Uniform Heat Flux ◽  
Complex Flow ◽  
Constant Property ◽  
Fin Efficiency

Enhanced heat transfer characteristics of low Reynolds number airflows in three-dimensional sinusoidal wavy plate-fin channels are investigated. For the computational simulation, steady state, constant property, periodically developed, laminar forced convection is considered with the channel surface at the uniform heat flux condition; the wavy-fin is modeled by its two asymptotic limits of 100% and zero fin efficiency. The governing equations are solved numerically using finite-volume techniques for a non-orthogonal, non-staggered grid. Computational results for velocity and temperature distribution, isothermal Fanning friction factor f and Colburn factor j are presented for airflow rates in the range of 10 ≤ Re ≤ 1500. The numerical results are further compared with experimental data, with excellent agreement, for two different wavy-fin geometries. The influence of fin density on the flow behavior and the enhanced convection heat transfer are highlighted. Depending on the flow rate, a complex flow structure is observed, which is characterized by the generation, spatial growth and dissipation of vortices in the trough region of the wavy channel. The thermal boundary layers on the fin surface are periodically disrupted, resulting in high local heat fluxes. The overall heat transfer performance is improved considerably, compared to the straight channel with the same cross-section, with a relatively smaller increase in the associated pressure drop penalty.

Numerical Study on the Effect of Inner Tube Position on Heat Transfer Process in Self-Recuperative Radiant Tube

2011 ◽  
Vol 228-229 ◽  
pp. 676-680 ◽  
Author(s):  
Ye Tian ◽  
Xun Liang Liu ◽  
Zhi Wen
Keyword(s):  
Heat Transfer ◽  
Transfer Process ◽  
Numerical Study ◽  
Flame Temperature ◽  
Three Dimensional ◽  
Mathematic Model ◽  
Heat Transfer Process ◽  
Bulk Temperature ◽  
Radiant Tube ◽  
Peak Value

A three-dimensional mathematic model is developed for a 100kw single-end recuperative radiant tube and the simulation is performed with the CFD software FLUENT. Also it is used to investigate the effect of distance between combustion chamber exit and inner tube on heat transfer process. The results suggest that the peak value of combustion flame temperature drops along with the increasing of distance, which leads to low NOX discharging. Also radiant tube surface bulk temperature decreases, which causes radiant tube heating performance losses.

Aerothermal Investigation of a Rib-Roughened Trailing Edge Channel With Crossing-Jets—Part I: Flow Field Analysis

2009 ◽  
Vol 132 (1) ◽  
Author(s):  
Alessandro Armellini ◽  
Filippo Coletti ◽  
Tony Arts ◽  
Christophe Scholtes
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Side Wall ◽  
Field Analysis ◽  
Navier Stokes ◽  
Trailing Edge ◽  
Present Contribution ◽  
Cross Sectional ◽  
Numerical Predictions ◽  
Rib Roughened

The present contribution addresses the aerothermal, experimental, and computational studies of a trapezoidal cross-sectional model simulating a trailing edge cooling cavity with one rib-roughened wall. The flow is fed through tilted slots on one side wall and exits through straight slots on the opposite side wall. The flow field aerodynamics is investigated in Part I of the paper. The reference Reynolds number is defined at the entrance of the test section and set at 67,500 for all the experiments. A qualitative flow model is deduced from surface-streamline flow visualizations. Two-dimensional particle image velocimetry measurements are performed in several planes around midspan of the channel and recombined to visualize and quantify three-dimensional flow features. The crossing-jets issued from the tilted slots are characterized and the jet-rib interaction is analyzed. Attention is drawn to the motion of the flow deflected by the rib-roughened wall and impinging on the opposite smooth wall. The experimental results are compared with the numerical predictions obtained from the finite volume Reynolds-averaged Navier–Stokes solver, CEDRE.

Analytical Modeling of Temperature Distribution in Interposer-Based Microelectronic Systems

2013 ◽  
Author(s):  
Leila Choobineh ◽  
Dereje Agonafer ◽  
Ankur Jain
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Temperature Field ◽  
Temperature Distribution ◽  
Analytical Modeling ◽  
Three Dimensional ◽  
Heat Transfer Process ◽  
Thermal Design ◽  
Research Attention ◽  
On Chip

Heterogeneous integration in microelectronic systems using interposer technology has attracted significant research attention in the past few years. Interposer technology is based on stacking of several heterogeneous chips on a common carrier substrate, also referred to as the interposer. Compared to other technologies such as System-on-Chip (SoC) or System-in-Package (SiP), interposer-based integration offers several technological advantages. However, the thermal management of an interposer-based system is not well understood. The presence of multiple heat sources in various die and the interposer itself needs to be accounted for in any effective thermal model. While a finite-element based simulation may provide a reasonable temperature prediction tool, an analytical solution is highly desirable for understanding the fundamentals of the heat transfer process in interposers. In this paper, we describe our recent work on analytical modeling of heat transfer in interposer-based microelectronic systems. The basic governing energy conservation equations are solved to derive analytical expressions for the temperature distribution in an interposer-based microelectronic system. These solutions are combined with an iterative approach to provide the three-dimensional temperature field in an interposer. Results are in excellent agreement with finite-element solutions. The analytical model is utilized to study the effect of various parameters on the temperature field in an interposer system. Results from this work may be helpful in the thermal design of microelectronic systems containing interposers.

Sign in / Sign up

Export Citation Format

Share Document