Dynamic Modeling on the Hybrid Molten Carbonate Fuel Cell-Gas Turbine Bottoming Cycle

2004 ◽  
Vol 2 (2) ◽  
pp. 94-98 ◽  
Author(s):  
Huisheng Zhang ◽  
Shilie Weng ◽  
Ming Su
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Gas Turbine ◽  
Dynamic Models ◽  
Simulation Models ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Hybrid Power ◽  
Hybrid Power Plant ◽  
Carbonate Fuel Cell

The intention of this paper is to present the dynamic models for the molten carbonate fuel cell (MCFC)-gas turbine hybrid cycle. This paper analyzes the performance of various components in the hybrid power plant, such as the compressor, turbine, recuperator, generator, fuel cell stack, etc. The modular simulation models of these components are presented. Based on the dynamic simulation modeling principle, one bottoming hybrid MCFC-microturbine cycle was studied to carry out the simulation. The simulation result can reflect the dynamic response of the hybrid power plant.

Dynamic Modeling on the Hybrid MCFC-Gas Turbine Bottoming Cycle

2003 ◽  
Author(s):  
Huisheng Zhang ◽  
Shilie Weng ◽  
Ming Su
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Gas Turbine ◽  
Simulation Modeling ◽  
Dynamic Models ◽  
Simulation Models ◽  
Fuel Cell Stack ◽  
Hybrid Power ◽  
Hybrid Power Plant ◽  
Micro Turbine

The intention of this paper is to present the dynamic models for the MCFC-gas turbine hybrid cycle. This paper analyzes the performance of various components in the hybrid power plant, such as compressor, turbine, recuperator, generator, fuel cell stack etc. The modular simulation models of these components are presented. Based on the dynamic simulation modeling principle, one bottoming hybrid MCFC-Micro turbine cycle was studied to carry out the simulation, the simulation result is reasonable.

The Reduction of CO2 Emission of Gas Turbine Power Plant by Using a Molten Carbonate Fuel Cell

2007 ◽  
Author(s):  
Jarosław Milewski ◽  
Jacek Sałacin´ski ◽  
Andrzej Miller
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Gas Turbine ◽  
Heat Exchangers ◽  
Co2 Emission ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Reduction Of Co2 ◽  
Gas Turbine Power Plant ◽  
Carbonate Fuel Cell

The possibility of using a Molten Carbonate Fuel Cell (MCFC) to reduce the CO2 emission from Gas Turbine Power Plant (GTPP) is shown. The MCFC is placed after a gas turbine. The main advantages of this solution are: higher total electric power generated by hybrid system and reduced CO2 emission with remained system efficiency. A comparison of three systems: standard GTPP, GT-MCFC, and GT-MCFC with additional heat exchangers is shown. The application of MCFC could reduce CO2 emission of 73% (absolutely) and 77% relative to produced power.

Molten Carbonate Fuel Cell Gas Turbine Combined Cycle for Marine Propulsion: Part B — Part Load Operation

2002 ◽  
Author(s):  
Maria-Teresa Basurto ◽  
Pericles Pilidis ◽  
Richard Hales
Keyword(s):  
Fuel Cell ◽  
Power Systems ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Hybrid Power Systems ◽  
Hybrid Power ◽  
Marine Propulsion ◽  
Carbonate Fuel Cell

Molten Carbonate Fuel Cell/Gas Turbine (MCFC/GT) hybrid power systems represent a modern, efficient and clean alternative to the currently used marine propulsion systems. The objective of this paper is to present the results found from the application of MCFC/GT hybrid power systems to marine propulsion, and in particular to present the results of the off-design performance of a COGAFC system (Combined Gas Turbine and Fuel Cell System). The results presented are subjected to the current uncertainties on MCFC power systems derived from its early stage of development. It is, then, the interest of the authors to summarise the results of the research work done, providing to the lectors the understanding and a general view of which are the concerns, the benefits, and which should be the next steps on the implementation of these systems. The study is summarised into two papers: “Molten Carbonate Fuel Cell Gas Turbine Combined Cycle for Marine Propulsion. Part A: Design Point Operation” (Basurto et al., 2002), that describes the selection of the design point, and “Molten Carbonate Fuel Cell Gas Turbine Combined Cycle for Marine Propulsion. Part B: Part Load Operation”, that describes the off-design performance of the system. The study is based on previous work published by the authors on the integration of MCFCs with gas turbines (Basurto et al., 2001).

Performance Evaluation of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Oxy-Combustion Carbon Capture

2017 ◽  
Author(s):  
Ji Ho Ahn ◽  
Tong Seop Kim
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Design Parameters ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Carbonate Fuel Cell

Owing to the increasing consumption of fossil fuels and emission of greenhouse gases, interests in highly efficient and low carbon emitting power systems are growing fast. Several research groups have been suggesting advanced systems based on fuel cells and have also been applying carbon capture and storage technology to satisfy the demand for clean energy. In this study, the performance of a hybrid system, which is a combination of a molten carbonate fuel cell (MCFC) with oxy-combustion carbon capture and an indirectly fired micro gas turbine (MGT) was predicted. A 2.5MW MCFC system that is used in commercial applications was used as the reference system so that the results of the study could be applicable to practical situations. The ambient pressure type hybrid system was modeled by referring to the design parameters of an MGT that is currently being developed. A semi-closed type design characterized by flow recirculation was adopted for this hybrid system. A part of the recirculating gas is converted into liquefied carbon dioxide and captured for storage at the carbon separation unit. Almost 100% carbon dioxide capture is possible with this system. In these systems, the output power of the fuel cell is larger than in the normal hybrid system without carbon capture because the partial pressure of carbon dioxide increases. The increased cell power partially compensates for the power loss due to the carbon capture and MGT power reduction. The dependence of net system efficiency of the oxy-hybrid on compressor pressure ratio is marginal, especially beyond an optimal value.

Study on coal-fired power plant with CO 2 capture by integrating molten carbonate fuel cell system

Energy ◽  
2016 ◽  
Vol 117 ◽  
pp. 578-589 ◽  
Author(s):  
Liqiang Duan ◽  
Kun Xia ◽  
Tao Feng ◽  
Shilun Jia ◽  
Jing Bian
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Cell System ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Fuel Cell System ◽  
Carbonate Fuel Cell
Sign in / Sign up

Export Citation Format

Share Document