Study of Generation Mechanism of Three-Body Particles in Linear Tape Recording

2005 ◽  
Vol 127 (1) ◽  
pp. 155-163 ◽  
Author(s):  
Baogui Shi ◽  
J. L. Sullivan ◽  
M. A. Wild ◽  
S. O. Saied
Keyword(s):  
Photoelectron Spectroscopy ◽  
Tape Recording ◽  
Bearing Surface ◽  
Abrasive Particles ◽  
Force Microscopy ◽  
Atomic Force ◽  
Magnetic Spacing ◽  
Data Tape ◽  
Three Body ◽  
Pole Tip Recession

A major cause of magnetic spacing losses in data tape systems is pole tip recession (PTR). This study is an investigation of PTR in a linear data tape recording system and identification of the mechanisms responsible for these effects, but the results have implications for any head where the tape bearing surface is Al2O3/TiC, AlTiC. Tape cycling experiments were performed using the linear tape open system as the experimental platform with metal particle tape. All experiments were conducted within a matrix of pressure and humidity, which encompassed the system operating extremes. Atomic force microscopy was used to analyze the surface topography of the heads. Auger electron spectroscopy and x-ray photoelectron spectroscopy were employed to analyze the chemical changes on the surface of the heads and tapes. Environment was found to have a significant influence on the head/tape interface. Head wear and PTR was highest at high temperature and humidity. Water vapor was found to transform the surface layers on the TiC grains in the tape-bearing surface to TiO2. This process results in the production of TiO2 fragments that become trapped in the recessed pole tip region, acting as three-body abrasive particles. The TiO2 present on the TiC grains and on the surface of heads increases with the water content after cycling against tapes. The hypothesis is supported by the presence of Ti on the poles.

Pole Tip Recession: Investigation of Factors Affecting Its Measurement and Its Variation With Contact Start-Stop and Constant Speed Drag Testing

1995 ◽  
Vol 117 (4) ◽  
pp. 580-587 ◽  
Author(s):  
Chandrasekhar Nadimpalli ◽  
Frank E. Talke ◽  
Martin Smallen ◽  
Jerry J. K. Lee
Keyword(s):  
Dissimilar Materials ◽  
Optical Interferometry ◽  
Constant Speed ◽  
Bearing Surface ◽  
Contact Mode ◽  
Factors Affecting ◽  
Force Microscopy ◽  
Atomic Force ◽  
Pole Tip Recession ◽  
Local Value

Optical interferometry and contact mode atomic force microscopy are used to investigate the various factors that influence the measurement of pole tip recession. These factors include: (a) effect of dissimilar materials on optical interferometry results, (b) size and location of the air bearing surface used as the reference area, (c) the effect of slider crown, (d) the magnification of the objective used in optical interferometry and (e) the dependence of the AFM measurements on slider materials and scan direction of the AFM tip. The possibility of determining a local value of pole tip recession is examined wherein the sputtered alumina, rather than the Al2O3-TiC surface, is used as the reference surface. Finally, the effect of contact start/stop (CSS) and constant speed drag testing on pole tip recession is investigated by measuring the change in pole tip recession as a function of the number of start/stop and constant speed drag cycles.

Investigation of the Effect of Uv-Assisted Oxidation and Nitridation of Hafnium Metal Films

2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh
Keyword(s):  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Grazing Angle ◽  
X Ray Diffraction ◽  
Metal Thin Films ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Silicon Interface

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.

scholarly journals Photocatalytic reduction of graphene oxide with cuprous oxide film under UV-vis irradiation

2020 ◽  
Vol 59 (1) ◽  
pp. 207-214 ◽  
Author(s):  
Yao Wang ◽  
Jianqing Feng ◽  
Lihua Jin ◽  
Chengshan Li
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Photocatalytic Reduction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Reduced Graphene ◽  
Reduction Efficiency ◽  
Metal Organic ◽  
Reduction Effect

AbstractWe have grown Cu2O films by different routes including self-oxidation and metal-organic deposition (MOD). The reduction efficiency of Cu2O films on graphene oxide (GO) synthesized by modified Hummer’s method has been studied. Surface morphology and chemical state of as-prepared Cu2O film and GO sheets reduced at different conditions have also been investigated using atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). Results show that self-oxidation Cu2O film is more effective on phtocatalytic reduction of GO than MOD-Cu2O film. Moreover, reduction effect of self-oxidation Cu2O film to GO is comparable to that of environmental-friendly reducing agent of vitamin C. The present results offer a potentially eco-friendly and low-cost approach for the manufacture of reduced graphene oxide (RGO) by photocatalytic reduction.

scholarly journals Interface Structures and Electronic States of Epitaxial Tetraazanaphthacene on Single-Crystal Pentacene

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1088
Author(s):  
Yuki Gunjo ◽  
Hajime Kamebuchi ◽  
Ryohei Tsuruta ◽  
Masaki Iwashita ◽  
Kana Takahashi ◽  
...  
Keyword(s):  
Single Crystal ◽  
Photoelectron Spectroscopy ◽  
Grazing Incidence ◽  
Force Microscopy ◽  
Interface Dipole ◽  
Atomic Force ◽  
Interfacial Structures ◽  
Donor And Acceptor ◽  
A Charge ◽  
Interface Structures

The structural and electronic properties of interfaces composed of donor and acceptor molecules play important roles in the development of organic opto-electronic devices. Epitaxial growth of organic semiconductor molecules offers a possibility to control the interfacial structures and to explore precise properties at the intermolecular contacts. 5,6,11,12-tetraazanaphthacene (TANC) is an acceptor molecule with a molecular structure similar to that of pentacene, a representative donor material, and thus, good compatibility with pentacene is expected. In this study, the physicochemical properties of the molecular interface between TANC and pentacene single crystal (PnSC) substrates were analyzed by atomic force microscopy, grazing-incidence X-ray diffraction (GIXD), and photoelectron spectroscopy. GIXD revealed that TANC molecules assemble into epitaxial overlayers of the (010) oriented crystallites by aligning an axis where the side edges of the molecules face each other along the [1¯10] direction of the PnSC. No apparent interface dipole was found, and the energy level offset between the highest occupied molecular orbitals of TANC and the PnSC was determined to be 1.75 eV, which led to a charge transfer gap width of 0.7 eV at the interface.

scholarly journals Silane-Coating Strategy for Titanium Functionalization Does Not Impair Osteogenesis In Vivo

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1814
Author(s):  
Plinio Mendes Senna ◽  
Carlos Fernando de Almeida Barros Mourão ◽  
Rafael Coutinho Mello-Machado ◽  
Kayvon Javid ◽  
Pietro Montemezzi ◽  
...  
Keyword(s):  
Bone Formation ◽  
Photoelectron Spectroscopy ◽  
Titanium Surface ◽  
Rabbit Model ◽  
Biologically Active ◽  
Force Microscopy ◽  
Atomic Force ◽  
Silane Coating ◽  
Titanium Screws

Silane-coating strategy has been used to bind biological compounds to the titanium surface, thereby making implant devices biologically active. However, it has not been determined if the presence of the silane coating itself is biocompatible to osseointegration. The aim of the present study was to evaluate if silane-coating affects bone formation on titanium using a rabbit model. For this, titanium screw implants (3.75 by 6 mm) were hydroxylated in a solution of H2SO4/30% H2O2 for 4 h before silane-coating with 3-aminopropyltriethoxysilane (APTES). A parallel set of titanium screws underwent only the hydroxylation process to present similar acid-etched topography as a control. The presence of the silane on the surface was checked by x-ray photoelectron spectroscopy (XPS), with scanning electron microscopy (SEM) and atomic force microscopy (AFM). A total of 40 titanium screws were implanted in the tibia of ten New Zealand rabbits in order to evaluate bone-to-implant contact (BIC) after 3 weeks and 6 weeks of healing. Silane-coated surface presented higher nitrogen content in the XPS analysis, while micro- and nano-topography of the surface remained unaffected. No difference between the groups was observed after 3 and 6 weeks of healing (p > 0.05, independent t-test), although an increase in BIC occurred over time. These results indicate that silanization of a titanium surface with APTES did not impair the bone formation, indicating that this can be a reliable tool to anchor osteogenic molecules on the surface of implant devices.

Preparation and Characterization of Chitosan-Casein Phosphopeptides Biocomposite Coatings on the Medical Titanium Alloy

2011 ◽  
Vol 480-481 ◽  
pp. 1065-1069
Author(s):  
Bin Liu ◽  
Lin Wang ◽  
Yin Zhong Bu ◽  
Sheng Rong Yang ◽  
Jin Qing Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflectance ◽  
Ti Alloy ◽  
Force Microscopy ◽  
Implant Materials ◽  
Atomic Force ◽  
Casein Phosphopeptides ◽  
Potential Applications ◽  
First Time

Titanium (Ti) and its alloys have been applied in orthopedics as one of the most popular biomedical metallic implant materials. In this work, to enhance the bioactivity, the surface of Ti alloy pre-modified by silane coupling agent and glutaraldehyde was covalently grafted with chitosan (CS) via biochemical multistep self-assembled method. Then, for the first time, the achieved surface was further immobilized with casein phosphopeptides (CPP), which are one group of bioactive peptides released from caseins in the digestive tract and can facilitate the calcium adsorption and usage, to form CS-CPP biocomposite coatings. The structure and composition of the fabricated coatings were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and atomic force microscopy (AFM). As the experimental results indicated, multi-step assembly was successfully performed, and the CS and CPP were assembled onto the Ti alloy surface orderly. It is anticipated that the Ti alloys modified by CS-CPP biocomposite coatings will find potential applications as implant materials in biomedical fields.

Curcumin delivery by modified biosourced carbon-based nanoparticles

Nanomedicine ◽  
2022 ◽  
Author(s):  
Hossein Danafar ◽  
Marziyeh Salehiabar ◽  
Murat Barsbay ◽  
Hossein Rahimi ◽  
Mohammadreza Ghaffarlou ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free System ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Good Biocompatibility ◽  
Drug Free ◽  
Mcf 7 ◽  
Carbon Based

Aim: To prepare a novel hybrid system for the controlled release and delivery of curcumin (CUR). Methods: A method for the ultrasound-assisted fabrication of protein-modified nanosized graphene oxide-like carbon-based nanoparticles (CBNPs) was developed. After being modified with bovine serum albumin (BSA), CUR was loaded onto the synthesized hybrid (labeled CBNPs@BSA–CUR). The structure and properties of the synthesized nanoparticles were elucidated using transmission electron microscopy (TEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods. Results: CBNPs@BSA–CUR showed pH sensitivity and were calculated as controlled CUR release behavior. The drug-free system exhibited good biocompatibility and was nontoxic. However, CBNPs@BSA–CUR showed acceptable antiproliferative ability against MCF-7 breast cancer cells. Conclusion: CBNPs@BSA–CUR could be considered a highly promising nontoxic nanocarrier for the delivery of CUR with good biosafety.

Effect of Surface Chemistry on Ruthenium Wet Etching

2021 ◽  
Vol 314 ◽  
pp. 302-306
Author(s):  
Quoc Toan Le ◽  
E. Kesters ◽  
M. Doms ◽  
Efrain Altamirano Sánchez
Keyword(s):  
Surface Roughness ◽  
Photoelectron Spectroscopy ◽  
Etching Rate ◽  
Wet Etching ◽  
X Ray ◽  
Force Microscopy ◽  
Metal Free ◽  
Atomic Force ◽  
Different Types ◽  
Effect Of Surface

Different types of ALD Ru films, including as-deposited, annealed Ru, without and with a subsequent CMP step, were used for wet etching study. With respect to the as-deposited Ru, the etching rate of the annealed Ru film in metal-free chemical mixtures (pH = 7-9) was found to decrease substantially. X-ray photoelectron spectroscopy characterization indicated that this behavior could be explained by the presence of the formation of RuOx (x = 2,3) caused by the anneal. A short CMP step applied to the annealed Ru wafer removed the surface RuOx, at least partially, resulting in a significant increase of the etching rate. The change in surface roughness was quantified using atomic force microscopy.

Investigation of Ti/CuO interface by X-ray photoelectron spectroscopy and atomic force microscopy

2018 ◽  
Vol 51 (2) ◽  
pp. 246-253
Author(s):  
Dev Raj Chopra ◽  
Justin Seth Pearson ◽  
Darius Durant ◽  
Ritesh Bhakta ◽  
Anil R. Chourasia
Keyword(s):  
Atomic Force Microscopy ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force
Sign in / Sign up

Export Citation Format

Share Document