Impact of Area Contact Between Sensor Bulb and Evaporator Return Line on Modular Refrigeration Unit: Computational and Experimental

2005 ◽  
Vol 127 (1) ◽  
pp. 95-100 ◽  
Author(s):  
Saket Karajgikar ◽  
Nikhil Lakhkar ◽  
Dereje Agonafer ◽  
Roger Schmidt
Keyword(s):  
Mechanical Analysis ◽  
Evaporator Temperature ◽  
Thermally Induced ◽  
The Past ◽  
Refrigeration Unit ◽  
Expansion Valve ◽  
Flow Through ◽  
The Stability ◽  
Experimental Bench ◽  
Server System

In the past, virtually all commercial computers were designed to operate at temperatures above the ambient and were primarily air-cooled. However, researchers have always known the advantages of operating electronics at low temperatures. This facilitates faster switching time of semiconductor devices, increased circuit speeds due to lower electrical resistance of interconnecting materials, and reduction in thermally induced failures of devices and components. Depending on the doping characteristics of the chip, performance improvement ranges from 1% to 3% for every 10°C lower transistor temperature can be realized. The IBM S/390 high-end server system is the first IBM design which uses a conventional refrigeration system to maintain the chip temperatures below that of comparable air-cooled systems, but well above cryogenic temperature. In previous work, the focus was to study the effect of variation of evaporator outlet superheat on the flow through thermostatic expansion valve at varying evaporator temperature. The effect of change in bulb location and effect of bulb time constant on the hunting at the evaporator has been reported. The effect of area contact on the stability of the system is been predicted theoretically. Mechanical analysis is performed in order to check the stresses induced. The evaporator return line and the sensor bulb are simply attached. The effect of area contact is further studied experimentally on an experimental bench.

The Impact of Area Contact Between Sensor Bulb and Evaporator Return Line in a Modular Refrigeration Unit: Part I — Computational Study

2003 ◽  
Author(s):  
Nikhil Lakhkar ◽  
Saket Karajgikar ◽  
Dereje Agonafer ◽  
Roger Schmidt
Keyword(s):  
Computational Study ◽  
Junction Temperature ◽  
Evaporator Temperature ◽  
Thermally Induced ◽  
Performance Improvements ◽  
Refrigeration Unit ◽  
Expansion Valve ◽  
Flow Through ◽  
And Performance ◽  
The Impact

The combination of increased power dissipation and increased packaging density has led to substantial increase in junction temperature, at both the chip and module level in computers and especially at the high-end. In the past, virtually all-commercial computers were designed to operate at temperatures above the ambient and were primarily air-cooled. However, researchers have always known the advantages of operating electronics at low temperatures. This facilitates faster switching time of semiconductor devices, increased circuit speeds due to lower electrical resistance of interconnecting materials and reduction in thermally induced failures of devices and components. Depending on the doping characteristics of the chip, performance improvement ranges from 1 to 3% for every 10°C lower transistor temperature can be realized. The paper addresses improving the cooling of IBM’s high-end server unit, which uses a conventional refrigeration system to maintain the chip temperatures below that of comparable air-cooled systems, but well above cryogenic temperature. The IBM S/390 high-end server system is the first IBM design that employed refrigeration cooling. Advantage of using refrigeration unit is improvement in reliability, and performance improvements related to the lower operating temperature. In previous work, the focus was to study the effect of variation of evaporator outlet superheat on the flow through the thermostatic expansion valve at varying evaporator temperature. Also the effect of change in bulb location and effect of bulb time constant on the hunting at the evaporator has been reported. Currently, the evaporator return line and the sensor bulb are simply attached with a clip, with no thermal consideration. In the present study, the performance that results from varying the area of contact between the evaporator return line and sensor bulb is discussed. Subsequently, the effect of various interface materials on the performance is examined.

scholarly journals Thermodynamic and Energy Efficiency Analysis of a Domestic Refrigerator Using Al2O3 Nano-Refrigerant

2021 ◽  
Vol 13 (10) ◽  
pp. 5659
Author(s):  
Farhood Sarrafzadeh Javadi ◽  
Rahman Saidur
Keyword(s):  
Temperature Gradient ◽  
Technological Changes ◽  
Nanoparticle Concentration ◽  
Evaporator Temperature ◽  
Domestic Refrigerator ◽  
The Past ◽  
Nano Lubricant ◽  
The Stability ◽  
Energy Efficiency Analysis ◽  
Al2o3 Nanofluid

Refrigeration systems have experienced massive technological changes in the past 50 years. Nanotechnology can lead to a promising technological leap in the refrigeration industry. Nano-refrigerant still remains unknown because of the complexity of the phase change process of the mixture including refrigerant, lubricant, and nanoparticle. In this study, the stability of Al2O3 nanofluid and the performance of a nano-refrigerant-based domestic refrigerator have been experimentally investigated, with the focus on the thermodynamic and energy approaches. It was found that by increasing the nanoparticle concentration, the stability of nano-lubricant was decreased and evaporator temperature gradient was increased. The average of the temperature gradient increment in the evaporator was 20.2% in case of using 0.1%-Al2O3. The results showed that the energy consumption of the refrigerator reduced around 2.69% when 0.1%-Al2O3 nanoparticle was added to the system.

Effect of the Thermostatic Expansion Valve Characteristics on the Stability of a Refrigeration System: Part II

2003 ◽  
Author(s):  
Amit Kulkarni ◽  
Dereje Agonafer ◽  
Roger Schmidt
Keyword(s):  
Load Condition ◽  
Transient Behavior ◽  
System Stability ◽  
Stable Operation ◽  
Refrigeration System ◽  
Expansion Valve ◽  
System Part ◽  
Suction Line ◽  
The Stability ◽  
Experimental Bench

The combination of increased power dissipation and increased packaging density has led to substantial increases in chip and module heat flux in high-end computers. The challenge has been to limit the rise in chip temperature. In the past virtually all-commercial computers were designed to operate at temperatures above the ambient. However researchers have identified the advantages of operating electronics at low temperatures. The current research focuses on IBM’s mainframe, which uses a conventional refrigeration system to maintain chip temperatures below that of comparable air-cooled systems, but well above cryogenic temperatures. An experimental bench was built to study the effect of variation of evaporator outlet superheat on system performance. Three different types of thermostatic expansion valves were tested in order to verify that the bulb size and bulb location have significant effect on the transient behavior of the system. Bulbs of each of the three thermostatic expansion valves were mounted at five different locations on the suction line. It was observed that the overall system stability increases as we move closer to the evaporator exit. It was also observed that there exists a region in the suction line at which the superheat variation is the least and placing the bulb at this region gives maximum stable operation of the system. This region can be defined as the minimum stable superheat point. Tests were conducted at five different load conditions 1000W, 750W, 500W, 250W and no load condition. It was observed that the system was the most stable at full load condition for all three types of valves and system stability consistently decreased as the load was decreased.

Managing rivers for conservation and ecotourism in the Kruger National Park

1995 ◽  
Vol 32 (5-6) ◽  
pp. 227-233 ◽  
Author(s):  
F. J. Venter ◽  
A. R. Deacon
Keyword(s):  
National Park ◽  
Good Condition ◽  
Kruger National Park ◽  
Rapid Expansion ◽  
Natural Environments ◽  
The West ◽  
The Past ◽  
Management Actions ◽  
Flow Through ◽  
Three Rivers

Six major rivers flow through the Kruger National Park (KNP). All these rivers originate outside and to the west of the KNP and are highly utilized. They are crucially important for the conservation of the unique natural environments of the KNP. The human population growth in the Lowveld during the past two decades brought with it the rapid expansion of irrigation farming, exotic afforestation and land grazed by domestic stock, as well as the establishment of large towns, mines, dams and industries. Along with these developments came overgrazing, erosion, over-utilization and pollution of rivers, as well as clearing of indigenous forests from large areas outside the borders of the KNP. Over-utilization of the rivers which ultimately flow through the KNP poses one of the most serious challenges to the KNP's management. This paper gives the background to the development in the catchments and highlights the problems which these have caused for the KNP. Management actions which have been taken as well as their results are discussed and solutions to certain problems proposed. Three rivers, namely the Letaba, Olifants and Sabie are respectively described as examples of an over-utilized river, a polluted river and a river which is still in a fairly good condition.

Stability and Folding of the Unusually Stable Hemoglobin from Synechocystis is Subtly Optimized and Dependent on the Key Heme Pocket Residues.

2020 ◽  
Vol 27 ◽  
Author(s):  
Sheetal Uppal ◽  
Mohd. Asim Khan ◽  
Suman Kundu
Keyword(s):  
Molten Globule ◽  
Life Forms ◽  
Model System ◽  
Heme Pocket ◽  
The Past ◽  
Specific Manner ◽  
Delivery Vehicles ◽  
The Stability ◽  
Key Residues ◽  
Synechocystis Sp

Aims: The aim of our study is to understand the biophysical traits that govern the stability and folding of Synechocystis hemoglobin, a unique cyanobacterial globin that displays unusual traits not observed in any of the other globins discovered so far. Background: For the past few decades, classical hemoglobins such as vertebrate hemoglobin and myoglobin have been extensively studied to unravel the stability and folding mechanisms of hemoglobins. However, the expanding wealth of hemoglobins identified in all life forms with novel properties, like heme coordination chemistry and globin fold, have added complexity and challenges to the understanding of hemoglobin stability, which has not been adequately addressed. Here, we explored the unique truncated and hexacoordinate hemoglobin from the freshwater cyanobacterium Synechocystis sp. PCC 6803 known as “Synechocystis hemoglobin (SynHb)”. The “three histidines” linkages to heme are novel to this cyanobacterial hemoglobin. Objective: Mutational studies were employed to decipher the residues within the heme pocket that dictate the stability and folding of SynHb. Methods: Site-directed mutants of SynHb were generated and analyzed using a repertoire of spectroscopic and calorimetric tools. Result: The results revealed that the heme was stably associated to the protein under all denaturing conditions with His117 playing the anchoring role. The studies also highlighted the possibility of existence of a “molten globule” like intermediate at acidic pH in this exceptionally thermostable globin. His117 and other key residues in the heme pocket play an indispensable role in imparting significant polypeptide stability. Conclusion: Synechocystis hemoglobin presents an important model system for investigations of protein folding and stability in general. The heme pocket residues influenced the folding and stability of SynHb in a very subtle and specific manner and may have been optimized to make this Hb the most stable known as of date. Other: The knowledge gained hereby about the influence of heme pocket amino acid side chains on stability and expression is currently being utilized to improve the stability of recombinant human Hbs for efficient use as oxygen delivery vehicles.

scholarly journals Copper Phyllosilicates-Derived Catalysts in the Production of Alcohols from Hydrogenation of Carboxylates, Carboxylic Acids, Carbonates, Formyls, and CO2: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 255
Author(s):  
Dien-Thien To ◽  
Yu-Chuan Lin
Keyword(s):  
Carboxylic Acids ◽  
Catalytic Performance ◽  
Spatial Effect ◽  
Synthesis Methods ◽  
The Past ◽  
Surface Areas ◽  
Preparation Conditions ◽  
Remedial Actions ◽  
The Stability ◽  
Size Interaction

Copper phyllosilicates-derived catalysts (CuPS-cats) have been intensively explored in the past two decades due to their promising activity in carbonyls hydrogenation. However, CuPS-cats have not been completely reviewed. This paper focuses on the aspects concerning CuPS-cats from synthesis methods, effects of preparation conditions, and dopant to catalytic applications of CuPS-cats. The applications of CuPS-cats include the hydrogenation of carboxylates, carboxylic acids, carbonates, formyls, and CO2 to their respective alcohols. Besides, important factors such as the Cu dispersion, Cu+ and Cu0 surface areas, particles size, interaction between Cu and supports and dopants, morphologies, and spatial effect on catalytic performance of CuPS-cats are discussed. The deactivation and remedial actions to improve the stability of CuPS-cats are summarized. It ends up with the challenges and prospective by using this type of catalyst.

scholarly journals Numerical simulation of periodic MHD casson nanofluid flow through porous stretching sheet

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Abdullah Al-Mamun ◽  
S. M. Arifuzzaman ◽  
Sk. Reza-E-Rabbi ◽  
Umme Sara Alam ◽  
Saiful Islam ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Lewis Number ◽  
Stability And Convergence ◽  
Radiation Absorption ◽  
Physical Parameters ◽  
Theoretical Idea ◽  
Prostate Cancer Therapy ◽  
Flow Through ◽  
Explicit Finite Difference ◽  
The Stability

AbstractThe perspective of this paper is to characterize a Casson type of Non-Newtonian fluid flow through heat as well as mass conduction towards a stretching surface with thermophoresis and radiation absorption impacts in association with periodic hydromagnetic effect. Here heat absorption is also integrated with the heat absorbing parameter. A time dependent fundamental set of equations, i.e. momentum, energy and concentration have been established to discuss the fluid flow system. Explicit finite difference technique is occupied here by executing a procedure in Compaq Visual Fortran 6.6a to elucidate the mathematical model of liquid flow. The stability and convergence inspection has been accomplished. It has observed that the present work converged at, Pr ≥ 0.447 indicates the value of Prandtl number and Le ≥ 0.163 indicates the value of Lewis number. Impact of useful physical parameters has been illustrated graphically on various flow fields. It has inspected that the periodic magnetic field has helped to increase the interaction of the nanoparticles in the velocity field significantly. The field has been depicted in a vibrating form which is also done newly in this work. Subsequently, the Lorentz force has also represented a great impact in the updated visualization (streamlines and isotherms) of the flow field. The respective fields appeared with more wave for the larger values of magnetic parameter. These results help to visualize a theoretical idea of the effect of modern electromagnetic induction use in industry instead of traditional energy sources. Moreover, it has a great application in lung and prostate cancer therapy.

Transformation behavior of yttria stabilized tetragonal zirconia polycrystal–TiB2 composites

2001 ◽  
Vol 16 (7) ◽  
pp. 2158-2169 ◽  
Author(s):  
B. Basu ◽  
J. Vleugels ◽  
O. Van Der Biest
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
Low Temperature ◽  
Tetragonal Zirconia ◽  
Mechanical Analysis ◽  
Transformation Behavior ◽  
Thermal Expansion Data ◽  
Thermally Induced ◽  
First Time ◽  
Tetragonal Zirconia Polycrystal

The objective of the present article is to study the influence of TiB2 addition on the transformation behavior of yttria stabilized tetragonal zirconia polycrystals (Y-TZP). A range of TZP(Y)–TiB2 composites with different zirconia starting powder grades and TiB2 phase contents (up to 50 vol%) were processed by the hot-pressing route. Thermal expansion data, as obtained by thermo-mechanical analysis were used to assess the ZrO2 phase transformation in the composites. The thermal expansion hysteresis of the transformable ceramics provides information concerning the transformation behavior in the temperature range of the martensitic transformation and the low-temperature degradation. Furthermore, the transformation behavior and susceptibility to low-temperature degradation during thermal cycling were characterized in terms of the overall amount and distribution of the yttria stabilizer, zirconia grain size, possible dissolution of TiB2 phase, and the amount of residual stress generated in the Y-TZP matrix due to the addition of titanium diboride particles. For the first time, it is demonstrated in the present work that the thermally induced phase transformation of tetragonal zirconia in the Y-TZP composites can be controlled by the intentional addition of the monoclinic zirconia particles into the 3Y-TZP matrix.

Determination of the Discharge Coefficient of a Thin-Walled Orifice Used in Hydrostatic Bearings

2005 ◽  
Vol 127 (3) ◽  
pp. 679-684 ◽  
Author(s):  
S. Charles ◽  
O. Bonneau ◽  
J. Fre^ne
Keyword(s):  
Discharge Coefficient ◽  
Ad Hoc ◽  
Thrust Bearing ◽  
Accurate Estimation ◽  
Hydrostatic Bearing ◽  
Hydrostatic Bearings ◽  
Flow Through ◽  
Thin Walled ◽  
Experimental Bench

The characteristics of hydrostatic bearings can be influenced by the compensating device they use, for example, a thin-walled orifice (diaphragm). The flow through the orifice is given by a law where an ad hoc discharge coefficient appears, and, in order to guarantee the characteristics of the hydrostatic bearing, this coefficient must be calibrated. The aim of this work is to provide an accurate estimation of the discharge coefficient under specific conditions. Therefore an experimental bench was designed and a numerical model was carried out. The results obtained then by the experimental and theoretical approach were compared with the values given by the literature. Finally, the influence of the discharge coefficient on the behavior of a thrust bearing is examined.

Sign in / Sign up

Export Citation Format

Share Document