Influence of Cervical Disc Degeneration after Posterior Surgical Techniques in Combined Flexion-Extension—A Nonlinear Analytical Study

2005 ◽  
Vol 127 (1) ◽  
pp. 186-192 ◽  
Author(s):  
Hong-Wan Ng ◽  
Ee-Chon Teo ◽  
Qinghang Zhang
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Cortical Bone ◽  
Rotational Motion ◽  
Surgical Techniques ◽  
Cervical Disc ◽  
Spinal Instability ◽  
Disk Degeneration ◽  
Flexion Extension ◽  
Rotational Motions

Laminectomy and facetectomy are surgical techniques used for decompression of the cervical spinal stenosis. Recent in vitro and finite element studies have shown significant cervical spinal instability after performing these surgical techniques. However, the influence of degenerated cervical disk on the biomechanical responses of the cervical spine after these surgical techniques remains unknown. Therefore, a three-dimensional nonlinear finite element model of the human cervical spine (C2–C7) was created. Two types of disk degeneration grades were simulated. For each grade of disk degeneration, the intact as well as the two surgically altered models simulating C5 laminectomy with or without C5–C6 total facetectomies were exercised under flexion and extension. Intersegmental rotational motions, internal disk annulus, cancellous and cortical bone stresses were obtained and compared to the normal intact model. Results showed that the cervical rotational motion decreases with progressive disk degeneration. Decreases in the rotational motion due to disk degeneration were accompanied by higher cancellous and cortical bone stress. The surgically altered model showed significant increases in the rotational motions after laminectomies and facetectomies when compared to the intact model. However, the percentage increases in the rotational motions after various surgical techniques were reduced with progressive disk degeneration.

FEBio finite element model of a pediatric cervical spine

2021 ◽  
pp. 1-7
Author(s):  
Sean M. Finley ◽  
J. Harley Astin ◽  
Evan Joyce ◽  
Andrew T. Dailey ◽  
Douglas L. Brockmeyer ◽  
...  
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Finite Element Model ◽  
Material Properties ◽  
Surgical Simulation ◽  
Element Model ◽  
Axial Stiffness ◽  
Published Data ◽  
Axial Tension ◽  
Flexion Extension

OBJECTIVE The underlying biomechanical differences between the pediatric and adult cervical spine are incompletely understood. Computational spine modeling can address that knowledge gap. Using a computational method known as finite element modeling, the authors describe the creation and evaluation of a complete pediatric cervical spine model. METHODS Using a thin-slice CT scan of the cervical spine from a 5-year-old boy, a 3D model was created for finite element analysis. The material properties and boundary and loading conditions were created and model analysis performed using open-source software. Because the precise material properties of the pediatric cervical spine are not known, a published parametric approach of scaling adult properties by 50%, 25%, and 10% was used. Each scaled finite element model (FEM) underwent two types of simulations for pediatric cadaver testing (axial tension and cardinal ranges of motion [ROMs]) to assess axial stiffness, ROM, and facet joint force (FJF). The authors evaluated the axial stiffness and flexion-extension ROM predicted by the model using previously published experimental measurements obtained from pediatric cadaveric tissues. RESULTS In the axial tension simulation, the model with 50% adult ligamentous and annulus material properties predicted an axial stiffness of 49 N/mm, which corresponded with previously published data from similarly aged cadavers (46.1 ± 9.6 N/mm). In the flexion-extension simulation, the same 50% model predicted an ROM that was within the range of the similarly aged cohort of cadavers. The subaxial FJFs predicted by the model in extension, lateral bending, and axial rotation were in the range of 1–4 N and, as expected, tended to increase as the ligament and disc material properties decreased. CONCLUSIONS A pediatric cervical spine FEM was created that accurately predicts axial tension and flexion-extension ROM when ligamentous and annulus material properties are reduced to 50% of published adult properties. This model shows promise for use in surgical simulation procedures and as a normal comparison for disease-specific FEMs.

Cervical laminectomy without fusion in patients with rheumatoid arthritis

1999 ◽  
Vol 90 (2) ◽  
pp. 186-190 ◽  
Author(s):  
Dan Christensson ◽  
Hans Säveland ◽  
Stefan Zygmunt ◽  
Kjell Jonsson ◽  
Urban Rydholm
Keyword(s):  
Rheumatoid Arthritis ◽  
Cervical Spine ◽  
Cord Compression ◽  
Spinal Instability ◽  
Decompressive Laminectomy ◽  
Content Type ◽  
Fusion Procedure ◽  
Cervical Laminectomy ◽  
Flexion Extension ◽  
Fine Print

Object. The authors performed a prospective study to determine whether cervical laminectomy without simultaneous fusion results in spinal instability. Methods. Because of clinical and radiographic signs of cord compression, 15 patients with rheumatoid arthritis (including one with Bechterew's disease) and severe involvement of the cervical spine underwent decompressive laminectomy without fusion performed on one or more levels. Preoperative flexion—extension radiographs demonstrated dislocation but no signs of instability at the level of cord compression. Clinical and radiological reexamination were performed twice at a median of 15 months (6–24 months) and 43 months (28–72 months) postoperatively. One patient developed severe vertical translocation 28 months after undergoing a C-1 laminectomy, which led to sudden tetraplegia. She required reoperation in which posterior fusion was performed. No signs of additional instability at the operated levels were found in the remaining 14 patients. In three patients increased but stable dislocation was demonstrated. The results of clinical examination were favorable in most patients, with improvement of neurological symptoms and less pain. Conclusions. The authors conclude that decompressive laminectomy in which the facet joints are preserved can be performed in the rheumatoid arthritis-affected cervical spine in selected patients in whom signs of cord compression are demonstrated, but in whom radiographic and preoperative signs of instability are not. Performing a simultaneous fusion procedure does not always appear necessary. Vertical translocation must be detected early, and if present, a C-1 laminectomy should be followed by occipitocervical fusion.

scholarly journals Traditional and Cortical Trajectory Screws of Static and Dynamic Lumbar Fixation- A Finite Element Study

2020 ◽  
Author(s):  
Che-Wei Liu ◽  
Lu-Lin Wang ◽  
Yu-Kun Xu ◽  
Chun-Ming Chen ◽  
Jian-Cyuan Wang ◽  
...  
Keyword(s):  
Finite Element ◽  
Cortical Bone ◽  
Large Diameter ◽  
Fatigue Cracking ◽  
Adjacent Segment ◽  
Finite Element Study ◽  
Pull Out ◽  
Comparison Results ◽  
Flexion Extension ◽  
Element Study

Abstract Background: Two types of screw trajectories are commonly used in lumbar surgery. Both traditional trajectory (TT) and cortical bone trajectory (CBT) were shown to provide equivalent pull-out strengths of a screw. CBT utilizing a laterally-directed trajectory engaging only cortical bone in the pedicle is widely used in minimal invasive spine posterior fusion surgery. It has been demonstrated that CBT exerts a lower likelihood of violating the facet joint, and superior pull-out strength than the TT screws, especially in osteoporotic vertebral body. No design yet to apply this trajectory to dynamic fixation. To evaluate kinetic and kinematic behavior in both static and dynamic CBT fixation a finite element study was designed. This study aimed to simulate the biomechanics of CBT-based dynamic system for an evaluation of CBT dynamization. Methods: A validated nonlinearly lumbosacral finite-element model was used to simulate four variations of screw fixation. Responses of both implant (screw stress) and tissues (disc motion, disc stress, and facet force) at the upper adjacent (L3-L4) and fixed (L4-L5) segments were used as the evaluation indices. Flexion, extension, bending, and rotation of both TT and CBT screws were simulated in this study for comparison. Results: The results showed that the TT static was the most effective stabilizer to the L4-L5 segment, followed by CBT static, TT dynamic, and the CBT dynamic, which was the least effective. Dynamization of the TT and CBT fixators decreased stability of the fixed segment and alleviate adjacent segment stress compensation. The 3.5-mm diameter CBT screw deteriorated stress distribution and rendered it vulnerable to bone-screw loosening and fatigue cracking. Conclusions: Modeling the effects of TT and CBT fixation in a full lumbosacral model suggest that dynamic TT provide slightly superior stability compared with dynamic CBT especially in bending and rotation. In dynamic CBT design, large diameter screws might avoid issues with loosening and cracking.

scholarly journals Biomechanical Evaluation of Cortical Bone Trajectory Fixation with Traditional Pedicle Screw in the Lumbar Spine: A Finite Element Study

2021 ◽  
Vol 11 (22) ◽  
pp. 10583
Author(s):  
Kuo-Chih Su ◽  
Kun-Hui Chen ◽  
Chien-Chou Pan ◽  
Cheng-Hung Lee
Keyword(s):  
Finite Element ◽  
Lumbar Spine ◽  
Cortical Bone ◽  
Pedicle Screw ◽  
Spinal Surgery ◽  
Pedicle Screws ◽  
Element Model ◽  
Cortical Bone Trajectory ◽  
Significant Difference ◽  
Flexion Extension

Cortical bone trajectory (CBT) is increasingly used in spinal surgery. Although there are many biomechanical studies, the biomechanical effect of CBT in combination with traditional pedicle screws is not detailed. Therefore, the purpose of this study was to investigate the effects of the traditional pedicle screw and CBT screw implantation on the lumbar spine using finite element methods. Based on the combination of the traditional pedicle screw and the CBT system implanted into the lumbar spine, four finite element spinal lumbar models were established. The models were given four different load conditions (flexion, extension, lateral bending, and axial rotation), and the deformation and stress distribution on the finite element model were observed. The results show that there was no significant difference in the structural stability of the lumbar spine model between the traditional pedicle screw system and the CBT system. In addition, CBT may reduce stress on the endplate. Different movements performed by the model may have significant biomechanical effects on the spine and screw system. Clinical spinal surgeons may also consider using the CBT system in revision spinal surgery, which may contribute to smaller wounds.

scholarly journals A lattice topology optimization of cervical interbody fusion cage and finite element comparison with ZK60 and Ti-6Al-4V cages

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Jun Sun ◽  
Qiuan Wang ◽  
Dazhao Cai ◽  
Wenxiang Gu ◽  
Yiming Ma ◽  
...  
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Topology Optimization ◽  
Bone Graft ◽  
Interbody Fusion ◽  
Stress Shielding ◽  
Shielding Effect ◽  
Cervical Disc ◽  
Significant Difference ◽  
Fusion Cage

Abstract Background In current clinical practice, the most commonly used fusion cage materials are titanium (Ti) alloys. However, titanium alloys are non-degradable and may cause stress shielding. ZK60 is a bio-absorbable implant that can effectively avoid long-term complications, such as stress shielding effects, implant displacement, and foreign body reactions. In this study, we aimed at investigating the biomechanical behavior of the cervical spine after implanting different interbody fusion cages. Methods The finite element (FE) models of anterior cervical disc removal and bone graft fusion (ACDF) with a ZK60 cage and a Ti cage were constructed, respectively. Simulations were performed to evaluate their properties of flexion, extension, lateral bending, and axial rotation of the cervical spine. Moreover, a side-by-side comparison was conducted on the range of motion (ROM), the deformation of cages, the stress in the cages, bone grafts, and cage-end plate interface. Simultaneously, according to the biomechanical analysis results, the microporous structure of the ZK60 cage was improved by the lattice topology optimization technology and validation using static structure. Results The ROMs in the current study were comparable with the results reported in the literature. There was no significant difference in the deformation of the two cages under various conditions. Moreover, the maximum stress occurred at the rear of the cage in all cases. The cage’s and endplate-cage interface’s stress of the ZK60 group was reduced compared with the Ti cage, while the bone graft stress in the ZK60 fusion cage was significantly greater than that in the Ti fusion cage (average 27.70%). We further optimized the cage by filling it with lattice structures, the volume was decreased by 40%, and validation showed more significant biomechanical properties than ZK60 and Ti cages. Conclusion The application of the ZK60 cage can significantly increase the stress stimulation to the bone graft by reducing the stress shielding effect between the two instrumented bodies. We also observed that the stress of the endplate-cage interface decreased as the reduction of the cage’s stiffness, indicating that subsidence is less likely to occur in the cage with lower stiffness. Moreover, we successfully designed a porous cage based on the biomechanical load by lattice optimization.

Numerical investigation on the stability of human upper cervical spine (C1–C3)

2021 ◽  
pp. 1-13
Author(s):  
Waseem Ur Rahman ◽  
Wei Jiang ◽  
Guohua Wang ◽  
Zhijun Li
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Axial Rotation ◽  
Upper Cervical Spine ◽  
Fe Model ◽  
Facet Joints ◽  
Flexion Extension ◽  
Upper Cervical ◽  
The Stability

BACKGROUND: The finite element method (FEM) is an efficient and powerful tool for studying human spine biomechanics. OBJECTIVE: In this study, a detailed asymmetric three-dimensional (3D) finite element (FE) model of the upper cervical spine was developed from the computed tomography (CT) scan data to analyze the effect of ligaments and facet joints on the stability of the upper cervical spine. METHODS: A 3D FE model was validated against data obtained from previously published works, which were performed in vitro and FE analysis of vertebrae under three types of loads, i.e. flexion/extension, axial rotation, and lateral bending. RESULTS: The results show that the range of motion of segment C1–C2 is more flexible than that of segment C2–C3. Moreover, the results from the FE model were used to compute stresses on the ligaments and facet joints of the upper cervical spine during physiological moments. CONCLUSION: The anterior longitudinal ligaments (ALL) and interspinous ligaments (ISL) are found to be the most active ligaments, and the maximum stress distribution is appear on the vertebra C3 superior facet surface under both extension and flexion moments.

scholarly journals Changes in foraminal area with anterior decompression versus keyhole foraminotomy in the cervical spine: a biomechanical investigation

2017 ◽  
Vol 27 (6) ◽  
pp. 620-626 ◽  
Author(s):  
Jacqueline Nguyen ◽  
Bryant Chu ◽  
Calvin C. Kuo ◽  
Jeremi M. Leasure ◽  
Christopher Ames ◽  
...  
Keyword(s):  
Cervical Spine ◽  
Cervical Disc ◽  
Cross Sectional ◽  
Key Points ◽  
Biomechanical Investigation ◽  
Flexion Extension ◽  
Indirect Decompression ◽  
Pure Moment ◽  
Keyhole Foraminotomy ◽  
Foraminal Area

OBJECTIVEAnterior cervical discectomy and fusion (ACDF) with or without partial uncovertebral joint resection (UVR) and posterior keyhole foraminotomy are established operative procedures to treat cervical disc degeneration and radiculopathy. Studies have demonstrated reliable results with each procedure, but none have compared the change in neuroforaminal area between indirect and direct decompression techniques. The purpose of this study was to determine which cervical decompression method most consistently increases neuroforaminal area and how that area is affected by neck position.METHODSEight human cervical functional spinal units (4 each of C5–6 and C6–7) underwent sequential decompression. Each level received the following surgical treatment: bilateral foraminotomy, ACDF, ACDF + partial UVR, and foraminotomy + ACDF. Multidirectional pure moment flexibility testing combined with 3D C-arm imaging was performed after each procedure to measure the minimum cross-sectional area of each foramen in 3 different neck positions: neutral, flexion, and extension.RESULTSNeuroforaminal area increased significantly with foraminotomy versus intact in all positions. These area measurements did not change in the ACDF group through flexion-extension. A significant decrease in area was observed for ACDF in extension (40 mm2) versus neutral (55 mm2). Foraminotomy + ACDF did not significantly increase area compared with foraminotomy in any position. The UVR procedure did not produce any changes in area through flexion-extension.CONCLUSIONSAll procedures increased neuroforaminal area. Foraminotomy and foraminotomy + ACDF produced the greatest increase in area and also maintained the area in extension more than anterior-only procedures. The UVR procedure did not significantly alter the area compared with ACDF alone. With a stable cervical spine, foraminotomy may be preferable to directly decompress the neuroforamen; however, ACDF continues to play an important role for indirect decompression and decompression of more centrally located herniated discs. These findings pertain to bony stenosis of the neuroforamen and may not apply to soft disc herniation. The key points of this study are as follows. Both ACDF and foraminotomy increase the foraminal space. Foraminotomy was most successful in maintaining these increases during neck motion. Partial UVR was not a significant improvement over ACDF alone. Foraminotomy may be more efficient at decompressing the neuroforamen. Results should be taken into consideration only with stable spines.

scholarly journals Ranges of Cervical Intervertebral Disc Deformation During an In Vivo Dynamic Flexion–Extension of the Neck

2017 ◽  
Vol 139 (6) ◽  
Author(s):  
Yan Yu ◽  
Haiqing Mao ◽  
Jing-Sheng Li ◽  
Tsung-Yuan Tsai ◽  
Liming Cheng ◽  
...  
Keyword(s):  
Cervical Spine ◽  
Imaging System ◽  
Human Subjects ◽  
Three Dimensional ◽  
Cervical Disc ◽  
Significant Difference ◽  
Flexion Extension ◽  
Fluoroscopic Imaging ◽  
Magnetic Resonance Imaging Mri

While abnormal loading is widely believed to cause cervical spine disc diseases, in vivo cervical disc deformation during dynamic neck motion has not been well delineated. This study investigated the range of cervical disc deformation during an in vivo functional flexion–extension of the neck. Ten asymptomatic human subjects were tested using a combined dual fluoroscopic imaging system (DFIS) and magnetic resonance imaging (MRI)-based three-dimensional (3D) modeling technique. Overall disc deformation was determined using the changes of the space geometry between upper and lower endplates of each intervertebral segment (C3/4, C4/5, C5/6, and C6/7). Five points (anterior, center, posterior, left, and right) of each disc were analyzed to examine the disc deformation distributions. The data indicated that between the functional maximum flexion and extension of the neck, the anterior points of the discs experienced large changes of distraction/compression deformation and shear deformation. The higher level discs experienced higher ranges of disc deformation. No significant difference was found in deformation ranges at posterior points of all the discs. The data indicated that the range of disc deformation is disc level dependent and the anterior region experienced larger changes of deformation than the center and posterior regions, except for the C6/7 disc. The data obtained from this study could serve as baseline knowledge for the understanding of the cervical spine disc biomechanics and for investigation of the biomechanical etiology of disc diseases. These data could also provide insights for development of motion preservation surgeries for cervical spine.

scholarly journals Subject-Specific Inverse Dynamics of the Head and Cervical Spine During in Vivo Dynamic Flexion-Extension

2013 ◽  
Vol 135 (6) ◽  
Author(s):  
William J. Anderst ◽  
William F. Donaldson ◽  
Joon Y. Lee ◽  
James D. Kang
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Inverse Dynamics ◽  
Total Force ◽  
Finite Element Models ◽  
Moment Arms ◽  
Flexion Extension ◽  
Subject Specific

The effects of degeneration and surgery on cervical spine mechanics are commonly evaluated through in vitro testing and finite element models derived from these tests. The objectives of the current study were to estimate the load applied to the C2 vertebra during in vivo functional flexion-extension and to evaluate the effects of anterior cervical arthrodesis on spine kinetics. Spine and head kinematics from 16 subjects (six arthrodesis patients and ten asymptomatic controls) were determined during functional flexion-extension using dynamic stereo X-ray and conventional reflective markers. Subject-specific inverse dynamics models, including three flexor muscles and four extensor muscles attached to the skull, estimated the force applied to C2. Total force applied to C2 was not significantly different between arthrodesis and control groups at any 10 deg increment of head flexion-extension (all p values ≥ 0.937). Forces applied to C2 were smallest in the neutral position, increased slowly with flexion, and increased rapidly with extension. Muscle moment arms changed significantly during flexion-extension, and were dependent upon the direction of head motion. The results suggest that in vitro protocols and finite element models that apply constant loads to C2 do not accurately represent in vivo cervical spine kinetics.

Sign in / Sign up

Export Citation Format

Share Document