scholarly journals Case Studies of Fatigue Life Improvement Using Low Plasticity Burnishing in Gas Turbine Engine Applications

2006 ◽  
Vol 128 (4) ◽  
pp. 865-872 ◽  
Author(s):  
Paul S. Preve´y ◽  
Ravi A. Ravindranath ◽  
Michael Shepard ◽  
Timothy Gabb
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Case Studies ◽  
Shot Peening ◽  
Damage Tolerance ◽  
Cold Work ◽  
Fatigue Performance ◽  
Surface Enhancement ◽  
Low Plasticity Burnishing ◽  
Life Improvement

Surface enhancement technologies such as shot peening, laser shock peening, and low plasticity burnishing (LPB) can provide substantial fatigue life improvement. However, to be effective, the compressive residual stresses that increase fatigue strength must be retained in service. For successful integration into turbine design, the process must be affordable and compatible with the manufacturing environment. LPB provides thermally stable compression of comparable magnitude and even greater depth than other methods, and can be performed in conventional machine shop environments on CNC machine tools. LPB provides a means to extend the fatigue lives of both new and legacy aircraft engines and ground-based turbines. Improving fatigue performance by introducing deep stable layers of compressive residual stress avoids the generally cost prohibitive alternative of modifying either material or design. The x-ray diffraction based background studies of thermal and mechanical stability of surface enhancement techniques are briefly reviewed, demonstrating the importance of minimizing cold work. The LPB process, tooling, and control systems are described. An overview of current research programs conducted for engine OEMs and the military to apply LPB to a variety of engine and aging aircraft components are presented. Fatigue performance and residual stress data developed to date for several case studies are presented including the following. (1) The effect of LPB on the fatigue performance of the nickel based super alloy IN718, showing the fatigue benefit of thermal stability at engine temperatures. (2) An order of magnitude improvement in damage tolerance of LPB processed Ti-6-4 fan blade leading edges. (3) Elimination of the fretting fatigue debit for Ti-6-4 with prior LPB. (4) Corrosion fatigue mitigation with LPB in Carpenter 450 steel. (5) Damage tolerance improvement in 17-4 PH steel. Where appropriate, the performance of LPB is compared to conventional shot peening after exposure to engine operating temperatures.

scholarly journals Case Studies of Fatigue Life Improvement Using Low Plasticity Burnishing in Gas Turbine Engine Applications

2003 ◽  
Author(s):  
Paul S. Preve´y ◽  
Ravi A. Ravindranath ◽  
Michael Shepard ◽  
Timothy Gabb
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Case Studies ◽  
Shot Peening ◽  
Damage Tolerance ◽  
Cold Work ◽  
Fatigue Performance ◽  
Surface Enhancement ◽  
Low Plasticity Burnishing ◽  
Life Improvement

Surface enhancement technologies such as shot peening, laser shock peening (LSP), and low plasticity burnishing (LPB) can provide substantial fatigue life improvement. However, to be effective, the compressive residual stresses that increase fatigue strength must be retained in service. For successful integration into turbine design, the process must be affordable and compatible with the manufacturing environment. LPB provides thermally stable compression of comparable magnitude and even greater depth than other methods, and can be performed in conventional machine shop environments on CNC machine tools. LPB provides a means to extend the fatigue lives of both new and legacy aircraft engines and ground-based turbines. Improving fatigue performance by introducing deep stable layers of compressive residual stress avoids the generally cost prohibitive alternative of modifying either material or design. The x-ray diffraction based background studies of thermal and mechanical stability of surface enhancement techniques are briefly reviewed, demonstrating the importance of minimizing cold work. The LPB process, tooling, and control systems are described. An overview of current research programs conducted for engine OEMs and the military to apply LPB to a variety of engine and aging aircraft components are presented. Fatigue performance and residual stress data developed to date for several case studies are presented including: • The effect of LPB on the fatigue performance of the nickel based super alloy IN718, showing the fatigue benefit of thermal stability at engine temperatures. • An order of magnitude improvement in damage tolerance of LPB processed Ti-6-4 fan blade leading edges. • Elimination of the fretting fatigue debit for Ti-6-4 with prior LPB. • Corrosion fatigue mitigation with LPB in Carpenter 450 steel. • Damage tolerance improvement in 17-4PH steel. Where appropriate, the performance of LPB is compared to conventional shot peening after exposure to engine operating temperatures.

scholarly journals Small–Scale Experimental Investigation of Fatigue Performance Improvement of Ship Hatch Corner with Shot Peening Treatments by Considering Residual Stress Relaxation

2021 ◽  
Vol 9 (4) ◽  
pp. 419
Author(s):  
Jin Gan ◽  
Zi’ang Gao ◽  
Yiwen Wang ◽  
Zhou Wang ◽  
Weiguo Wu
Keyword(s):  
Residual Stress ◽  
Surface Roughness ◽  
Fatigue Life ◽  
Stress Relaxation ◽  
Stress Field ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Fatigue Performance ◽  
Residual Stress Field ◽  
Residual Stress Relaxation

Ship hatch corner is a common structure in a ship and its fatigue problem has always been one of the focuses in ship engineering due to the long–term high–stress concentration state during the ship’s life. For investigating the fatigue life improvement of the ship hatch corner under different shot peening (SP) treatments, a series of fatigue tests, residual stress and surface topography measurements were conducted for SP specimens. Furthermore, the distributions of the surface residual stress are measured with varying numbers of cyclic loads, investigating the residual stress relaxation during cyclic loading. The results show that no matter which SP process parameters are used, the fatigue lives of the shot–peened ship hatch corner specimens are longer than those at unpeened specimens. The relaxation rate of the residual stress mainly depends on the maximum compressive residual stress (σRSmax) and the depth of the maximum compressive residual stress (δmax). The larger the values of σRSmax and δmax, the slower the relaxation rates of the residual stress field. The results imply that the effect of residual stress field and surface roughness should be considered comprehensively to improve the fatigue life of the ship hatch corner with SP treatment. The increase in peening intensity (PI) within a certain range can increase the depth of the compressive residual stress field (CRSF), so the fatigue performance of the ship hatch corner is improved. Once the PI exceeds a certain value, the surface damage caused by the increase in surface roughness will not be offset by the CRSF and the fatigue life cannot be improved optimally. This research provides an approach of fatigue performance enhancement for ship hatch corners in engineering application.

Introduction of Residual Stresses to Enhance Fatigue Performance in the Initial Design

2004 ◽  
Author(s):  
Paul Preve´y ◽  
N. Jayaraman ◽  
Ravi Ravindranath
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Shot Peening ◽  
Design Methodology ◽  
Damage Tolerance ◽  
Fatigue Performance ◽  
Trailing Edge ◽  
Laser Shock Processing ◽  
Damage Initiation ◽  
Design Protocol

High cycle fatigue (HCF) performance of turbine engine components has been known for decades to benefit from compressive surface residual stresses introduced through shot peening. However, credit for the fatigue benefits of shot peening has not been taken into account in the design of components. Rather shot peening has been used primarily to safe guard against HCF damage initiation. Recently, laser shock processing (LSP) and low plasticity burnishing (LPB) have been shown to provide spectacular fatigue and damage tolerance improvement by introducing deep (through-thickness) compression in critical areas. Until now, the fatigue benefits of these new surface treatments have been introduced during repair to improve an existing design. The present paper describes a design methodology and testing protocol* to take appropriate credit for the introduction of beneficial residual stresses into a component design to achieve optimal fatigue performance. A detailed design protocol has been developed that relates the introduction of a residual stress distribution using LPB for targeted HCF performance. This design protocol is applied to feature specimens designed to simulate the fatigue conditions at the trailing edge of a 1st stage low pressure compressor vane to provide optimal trailing edge damage tolerance. The use of finite element modeling, linear elastic fracture mechanics, and x-ray diffraction documentation of the residual stress field to develop LPB processing parameters is described. A novel adaptation of the traditional Haigh diagram to estimate the compressive residual stress magnitude and distribution to achieve optimal fatigue performance is described. Fatigue results on vane-edge feature samples are compared with analytical predictions provided by the design methodology. The potential for designing reduced section thickness of structural components leading to weight savings is discussed.

Fatigue Performance of Laser Peened Materials

2005 ◽  
Author(s):  
Michael R. Hill ◽  
Theresa E. Pistochini ◽  
Adrian T. DeWald
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
High Strength ◽  
Fatigue Performance ◽  
Laser Peening ◽  
Metallic Materials ◽  
Stress Distributions ◽  
Joint Research ◽  
300M Steel ◽  
Life Improvement

Laser peening is an emerging technology for the surface treatment of metallic materials that is capable of enhancing resistance to fatigue failure. This paper describes some recent results from joint research programs conducted to generate data on residual stress and fatigue performance of laser peened materials. Specifically, we present data for residual stress imparted by laser peening and fatigue life improvement of laser peened coupons relative to as-machined coupons. These data are presented for a range of high-strength materials employed in aircraft and other demanding applications: BSTOA Ti-6A14V titanium alloy, 300M steel, MP35N Ni-Co-Cr-Mo alloy, and 7050-T7451 aluminum alloy. For each material, residual stress distributions were measured for treatment with different laser peening parameter sets. For particular laser peening parameter sets, stress versus life data were generated for as-machined and laser peened fatigue coupons, which quantifies fatigue life improvement attained by laser peening over a range of applied loads.

Random impact FEM simulation of irregularly-shaped media for parametric study of vibratory surface enhancement

2021 ◽  
pp. 095440542199012
Author(s):  
Jing Zhang ◽  
Joselito Yam Alcaraz ◽  
Swee-Hock Yeo ◽  
Arun Prasanth Nagalingam ◽  
Abhay Gopinath
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Parametric Study ◽  
Thermal Loading ◽  
Low Cycle Fatigue ◽  
Fem Simulation ◽  
Surface Finishing ◽  
Aerospace Materials ◽  
Surface Enhancement ◽  
Steel Balls

Aerospace materials experience high levels of mechanical and thermal loading, high/low cycle fatigue, and damage from foreign objects during service, which can lead to premature retirement. Mechanical surface treatments of metallic components, for example, fan blades and blisks, are proven to improve fatigue life, improve wear resistance and avoid stress corrosion by introducing work hardening, compressive residual stresses of sub-surface, and surface finishing. Vibropeening can enhance aerospace materials’ fatigue life involving the kinetic agitation of hardened steel media in a vibratory finishing machine that induces compressive stresses into the component sub-layers while keeping a finished surface. Spherical steel balls are the most widely used shape among steel-based media and have been explored for decades. However, they are not always versatile, which cannot access deep grooves, sharp corners, and intricate profiles. Steel ballcones or satellites, when mixed with round steel balls and other steel media (diagonals, pins, eclipses, cones), works very well in such areas that ball-shaped media are unable to reach. However, a methodology of study the effect of irregularly-shaped media in surface enhancement processes has not been established. This paper proposes a finite element-based model to present a methodology for the parametric study of vibratory surface enhancement with irregularly-shaped media and investigates residual stress profiles within a treated area of an Inconel component. The methodology is discussed in detail, which involves a stochastic simulation of orientation, impact force, and impact location. The contrasting effects of a high aspect ratio, or an edge contact, as opposed to rounded and oblique contacts are demonstrated, with further analysis on the superposition of these effects. Finally, the simulation results are compared with actual residual stress measurements and was found to have a max percent difference of 34% up to 20 [Formula: see text]m below the media surface.

scholarly journals Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy: Part 1

2011 ◽  
Vol 462-463 ◽  
pp. 1355-1360
Author(s):  
Omar Suliman Zaroog ◽  
Aidy Ali ◽  
Sahari B. Barkawi
Keyword(s):  
Residual Stress ◽  
Stress Relaxation ◽  
Shot Peening ◽  
Applied Load ◽  
Cold Work ◽  
Cyclic Tests ◽  
Initial State ◽  
Loading Cycle ◽  
Residual Stress Relaxation ◽  
Alloy Part

It is important to account for residual stress relaxation phenomenon in the design of the component. Specimens of 2024-T351 aluminium alloy were used in this study. The specimens were shot peened under three different shot peening intensities. Cyclic tests for two load magnitudes were performed for 1, 2, 10, 1000 and 10000 cycles. Residual stresses, microhardness and the cold work percentage were measured at initial state and after each loading cycle for the three shot peening intensities and for the two loads. The study revealed that most of the drop in the residual stress, microhardness and cold work happened in the first cycle are dependent on the applied load.

scholarly journals Shot Peening Effects on Subsurface Layer Properties and Fatigue Performance of Case-Hardened 18CrNiMo7-6 Steel

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
H. S. Ho ◽  
D. L. Li ◽  
E. L. Zhang ◽  
P. H. Niu
Keyword(s):  
Fatigue Life ◽  
Shot Peening ◽  
Fatigue Testing ◽  
Subsurface Layer ◽  
Fatigue Performance ◽  
Single Shot ◽  
Depth Study ◽  
Enhanced Properties ◽  
Integrity Analysis ◽  
The Way

The present study is conducted with a dual-aim: firstly, to examine the effect of several single shot peening conditions on the subsurface layer properties and fatigue performance of the case-hardened 18CrNiMo7-6 steel, and secondly, to propose an optimized peening condition for improved fatigue performance. By carrying out the subsurface integrity analysis and fatigue testing, the underlying relationships among the peening process, subsurface layer property and fatigue performance are investigated, the way peening conditions affect the fatigue life and its associated scatter for the case-hardened 18CrNiMo7-6 steel is quantitatively assessed. The in-depth study shows that dual peening can be an optimized solution, for it is able to produce a subsurface layer with enhanced properties and eventually gain a significant improvement in fatigue performance.

Influence of Different Surface Treatments on Fatigue Life of 7050 Al Alloy

2019 ◽  
Vol 944 ◽  
pp. 142-148 ◽  
Author(s):  
Nan Li ◽  
Hai Tao Li ◽  
Jing Yi Zhou ◽  
Hong Tao Liu ◽  
Chang Kui Liu ◽  
...  
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Fracture Surface ◽  
Surface Morphology ◽  
Surface Analysis ◽  
Shot Peening ◽  
Surface Treatments ◽  
Al Alloy ◽  
Stress Measurements ◽  
Fracture Surface Analysis

The fatigue life of 7050 Al alloy samples after different surface treatments, i.e., as-machined, anodizing, shot peening, and shot peening followed by anodizing, had been tested. The shot peening treatment specimens presented the longest average fatigue life. The fatigue life of anodizing treatment specimens decreased by 69.3% and 78.8% at 215 MPa and 260 MPa stress levels than as-machined ones. Introducing the shot peening treatment before anodizing can increase the fatigue life by 220% / 296.9% at 215 MPa/260 Mpa than that only treated by anodizing. The effect of the surface treatments on the fatigue life were studied by performing surface morphology investigation, residual stress measurements and fracture surface analysis.

scholarly journals Fatigue Life Improvement of the High Strength Steel Welded Joints by Ultrasonic Impact Peening

Metals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 619 ◽  
Author(s):  
Ján Lago ◽  
Libor Trško ◽  
Michal Jambor ◽  
František Nový ◽  
Otakar Bokůvka ◽  
...  
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Welded Joints ◽  
Compressive Residual Stress ◽  
High Strength ◽  
Fatigue Properties ◽  
Low Alloy Steel ◽  
Residual Stress Field ◽  
Near Surface ◽  
Life Improvement

Ultrasonic impact peening was applied on welded joints manufactured from Strenx 700 MC high strength low alloy steel with the aim to improve the fatigue properties. Three different surface treatment parameters were tested, which resulted in transformation of the near-surface tensile residual stresses in the weld metal and heat affected zone to compressive residual stress field, while maximal values from −400 MPa up to −800 MPa were reached. The highest fatigue life improvement was reached by the double peening with the 85 N contact force, where the fatigue limit for N = 108 cycles increased from 370 MPa to 410 MPa.

A Study on the Fatigue Characteristics of Al6061-T651 by Shot Peening Velocity

2006 ◽  
Vol 326-328 ◽  
pp. 1093-1096 ◽  
Author(s):  
Won Jo Park ◽  
Sun Chul Huh ◽  
Sung Ho Park
Keyword(s):  
Residual Stress ◽  
Surface Roughness ◽  
Fatigue Life ◽  
Shot Peening ◽  
High Speed ◽  
Compressive Residual Stress ◽  
Velocity Increase ◽  
Fatigue Characteristics ◽  
Height Increase ◽  
Small Steel

Small steel ball is utilized in Shot peening process. Called “shot ball” are shot in high speed on the surface of metal. When the shot ball hit the surface, it makes plastic deformation and bounce off, that increase the fatigue life by compressive residual stress on surface. In this study, the results of observation on the tensile strength, hardness, surface roughness, compressive residual stress and fatigue life of a shot peened Al6061-T651 were obtained. Experimental results show that arc height increase tremendously by shot velocity. Also, it shows that surface roughness, hardness, compressive residual stress and fatigue life increase as shot velocity increase.

Sign in / Sign up

Export Citation Format

Share Document