Dynamic Compressive Behavior of EPDM Rubber Under Nearly Uniaxial Strain Conditions

2004 ◽  
Vol 126 (2) ◽  
pp. 213-217 ◽  
Author(s):  
B. Song ◽  
W. Chen
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Good Description ◽  
Axial Stress ◽  
Strain Energy Function ◽  
Uniaxial Strain ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Epdm Rubber

Dynamic compressive stress-strain curves for ethylene-propylene-diene monomer (EPDM) rubber at various strain rates under nearly uniaxial strain conditions have been determined with a pulse-shaped split Hopkinson pressure bar (SHPB). The resultant stress-strain curves exhibited significantly nonlinear behavior, with strong sensitivities to strain rates. The dynamic stresses in the EPDM rubber at certain strains under uniaxial strain conditions increased significantly as compared to those under uniaxial stress conditions. A strain-rate-dependent material model, including a strain-rate-sensitive term, has been developed through a strain-energy function for compressible Mooney-Rivlin hyperelastic solids. The model provided a good description of the compressive axial stress-strain response of the EPDM rubber at various strain rates under uniaxial strain conditions.

One-Dimensional Dynamic Compressive Behavior of EPDM Rubber

2003 ◽  
Vol 125 (3) ◽  
pp. 294-301 ◽  
Author(s):  
B. Song ◽  
W. Chen
Keyword(s):  
Strain Rate ◽  
High Speed ◽  
Dynamic Stress ◽  
Split Hopkinson Pressure Bar ◽  
Constant Strain Rate ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Epdm Rubber ◽  
One Dimensional

Dynamic compressive stress-strain curves at various strain rates of an Ethylene-Propylene-Diene Monomer Copolymer (EPDM) rubber have been determined with a modified split Hopkinson pressure bar (SHPB). The use of a pulse-shaping technique ensures that the specimen deforms at a nearly constant strain rate under dynamically equilibrated stress. The validity of the experiments was monitored by a high-speed digital camera for specimen edge deformation, and by piezoelectric force transducers for dynamic stress equilibrium. The resulting dynamic stress-strain curves for the EPDM indicate that the material is sensitive to strain rates and that the strain-rate sensitivity depends on the value of strain. Based on a strain energy function theory, a one-dimensional dynamic constitutive equation for this rubber was modified to describe the high strain-rate experimental results within the ranges of strain and strain rates presented in this paper.

scholarly journals Dynamic Constitutive Model of Ultra-High Molecular Weight Polyethylene (UHMWPE): Considering the Temperature and Strain Rate Effects

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1561 ◽  
Author(s):  
Kebin Zhang ◽  
Wenbin Li ◽  
Yu Zheng ◽  
Wenjin Yao ◽  
Changfang Zhao
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Plastic Material ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Ballistic Performance ◽  
Stress Strain ◽  
Different Temperatures

The temperature and strain rate significantly affect the ballistic performance of UHMWPE, but the deformation of UHMWPE under thermo-mechanical coupling has been rarely studied. To investigate the influences of the temperature and the strain rate on the mechanical properties of UHMWPE, a Split Hopkinson Pressure Bar (SHPB) apparatus was used to conduct uniaxial compression experiments on UHMWPE. The stress–strain curves of UHMWPE were obtained at temperatures of 20–100 °C and strain rates of 1300–4300 s−1. Based on the experimental results, the UHMWPE belongs to viscoelastic–plastic material, and a hardening effect occurs once UHMWPE enters the plastic zone. By comparing the stress–strain curves at different temperatures and strain rates, it was found that UHMWPE exhibits strain rate strengthening and temperature softening effects. By modifying the Sherwood–Frost model, a constitutive model was established to describe the dynamic mechanical properties of UHMWPE at different temperatures. The results calculated using the constitutive model were in good agreement with the experimental data. This study provides a reference for the design of UHMWPE as a ballistic-resistant material.

Measurement of Mechanical Properties of St 37 Material at High Strain Rates Using a Split Hopkinson Pressure Bar

2014 ◽  
Vol 660 ◽  
pp. 562-566 ◽  
Author(s):  
Akbar Afdhal ◽  
Leonardo Gunawan ◽  
Sigit P. Santosa ◽  
Ichsan Setya Putra ◽  
Hoon Huh
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Test Specimen ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Split Hopkinson ◽  
Pressure Bar

The dynamic mechanical properties of a material are important keys to investigate the impact characteristic of a structure such as a crash box. For some materials, the stress-strain relationships at high strain rate loadings are different than that at the static condition. These mechanical properties depend on the strain rate of the loadings, and hence an appropriate testing technique is required to measure them. To measure the mechanical properties of a material at high strain rates, ranging from 500 s-1 to 10000 s-1, a Split Hopkinson Pressure Bar is commonly used. In the measurements, strain pulses are generated in the bars system, and pulses being reflected and transmitted by a test specimen in the bar system are measured. The stress-strain curves as the material properties of the test specimen are obtained by processing the measured reflected and transmitted pulses. This paper presents the measurements of the mechanical properties of St 37 mild steel at several strain rates using a Split Hopkinson Pressure Bar. The stress-strain curves obtained in the measurement were curve fitted using the Power Law. The results show that the strength of St 37 material increases as the strain rate increases.

Dynamic Mechanical Properties of Polyvinyl Alcohol Hydrogels Measured by Double-Striker Electromagnetic Driving SHPB System

2019 ◽  
Vol 11 (02) ◽  
pp. 1950018 ◽  
Author(s):  
Beixin Xie ◽  
Peidong Xu ◽  
Liqun Tang ◽  
Yongrou Zhang ◽  
Kejia Xu ◽  
...  
Keyword(s):  
Polyvinyl Alcohol ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Soft Materials ◽  
Strain Rates ◽  
Mechanical Behaviors ◽  
Hopkinson Pressure Bar ◽  
Sensitive Material ◽  
Stress Strain ◽  
Strain Rate Effects

As an ultra-soft material (elastic modulus in magnitude of kPa), polyvinyl alcohol (PVA) hydrogels have the potential to substitute articular cartilage, but the measurement of the dynamic stress–strain relations of ultra-soft materials is still challenging. In this paper, a double-striker electromagnetic driving split-Hopkinson pressure bar (SHPB) system was developed, in which all the bars were made of polycarbonate, and the polycarbonate striker was pushed by a metal striker driven electromagnetically to ensure the precise control of impact velocity. With the new SHPB system, well design of the size of hydrogel specimen and rational processing of the signal data, the stress–strain relations of hydrogels with varied PVA contents at different strain rates were measured successfully. Experimental results indicate that PVA hydrogels are a positive strain rate sensitive material with different strain-rate effects at low and high strain rates. Finally, based on the latest quasi-static constitution of the PVA hydrogel, a rate-dependent constitutive equation was recommended, which may well depict the mechanical behaviors of hydrogels with different fiber contents at varied strain rates. It also derives that the contributions of strain rate and fiber content on the mechanical behaviors of the hydrogel are relatively independent.

scholarly journals Determination of High Strain-Rate Compressive Stress-Strain Loops of Selected Polymers

2010 ◽  
Vol 24-25 ◽  
pp. 349-355 ◽  
Author(s):  
Takashi Yokoyama ◽  
Kenji Nakai
Keyword(s):  
Strain Rate ◽  
Compressive Stress ◽  
Split Hopkinson Pressure Bar ◽  
Testing Machine ◽  
Viscoelastic Behavior ◽  
Strain Range ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Dissipation Energy

Compressive stress-strain loops of selected polymers at strain rates up to nearly 800/s are determined in a strain range of nearly 8% on the standard split Hopkinson pressure bar. Four different commercially available extruded polymers are tested at room temperature. The compressive stress-strain loops at low and intermediate strain rates are measured on an Instron testing machine. The effects of strain rate on the Young's modulus, flow stress and dissipation energy are discussed. It is shown that the area included within the stress-strain loop increases with increasing strain rate as well as a given strain, that is, all four extruded polymers tested exhibit intrinsic strain-rate dependent viscoelastic behavior and a high elastic aftereffect following complete unloading.

scholarly journals Study on the dynamic properties of AM-SLM AlSi10Mg alloy using the Split Hopkinson Pressure Bar (SHPB) technique

2018 ◽  
Vol 183 ◽  
pp. 04005 ◽  
Author(s):  
Bar Nurel ◽  
Moshe Nahmany ◽  
Adin Stern ◽  
Nahum Frage ◽  
Oren Sadot
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Properties ◽  
Rate Sensitivity ◽  
Strain Rate Range ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Static Mechanical ◽  
Split Hopkinson ◽  
Pressure Bar

Additive manufacturing by Selective Laser Melting of metals is attracting substantial attention, due to its advantages, such as short-time production of customized structures. This technique is useful for building complex components using a metallic pre-alloyed powder. One of the most used materials in AMSLM is AlSi10Mg powder. Additively manufactured AlSi10Mg may be used as a structural material and it static mechanical properties were widely investigated. Properties in the strain rates of 5×102–1.6×103 s-1 and at higher strain rates of 5×103 –105 s-1 have been also reported. The aim of this study is investigation of dynamic properties in the 7×102–8×103 s-1 strain rate range, using the split Hopkinson pressure bar technique. It was found that the dynamic properties at strain-rates of 1×103–3×103 s-1 depend on a build direction and affected by heat treatment. At higher and lower strain-rates the effect of build direction is limited. The anisotropic nature of the material was determined by the ellipticity of samples after the SHPB test. No strain rate sensitivity was observed.

scholarly journals Dynamic properties of stainless steel under direct tension loading using a simple gas gun

2018 ◽  
Vol 183 ◽  
pp. 02035 ◽  
Author(s):  
Anatoly Bragov ◽  
Alexander Konstantinov ◽  
Leopold Kruszka ◽  
Andrey Lomunov ◽  
Andrey Filippov
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
High Speed ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Properties ◽  
Tensile Load ◽  
Hopkinson Pressure Bar ◽  
Direct Tension ◽  
Stress Strain ◽  
Gas Gun

The combined experimental and theoretical approach was applied to the study of high-speed deformation and fracture of the 1810 stainless steel. The material tests were performed using a split Hopkinson pressure bar to determine dynamic stress-strain curves, strain rate histories, plastic properties and fracture in the strain rate range of 102 ÷ 104 s-1. A scheme has been realized for obtaining a direct tensile load in the SHPB, using a tubular striker and a gas gun of a simple design. The parameters of the Johnson-Cook material model were identified using the experimental results obtained. Using a series of verification experiments under various types of stress-strain state, the degree of reliability of the identified mathematical model of the behavior of the material studied was determined.

A Dynamic Mechanical Analysis of T2 Copper at High Strain Rates

2019 ◽  
Vol 812 ◽  
pp. 38-44
Author(s):  
Shuai Chen ◽  
Wen Bin Li ◽  
Xiao Ming Wang ◽  
Wen Jin Yao
Keyword(s):  
Yield Strength ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Pure Copper ◽  
Dislocation Slip ◽  
Strain Rates ◽  
High Strain Rates ◽  
Stress Strain ◽  
Shpb Test

This work compares the pure copper (T2 copper)’s stress-strain relationship at different strain rates in the uni-axial tension test and Split Hopkinson Pressure Bar (SHPB) test. Small samples were utilized in the high strain rate SHPB test in which the accuracy was modified by numerical simulation. The experimental results showed that the T2 copper’s yield strength at high strain rates largely outweighed the quasi static yield strength. The flow stress in the stress-strain curves at different strain rates appeared to be divergent and increased with the increase in strain rates, showing great strain strengthening and strain rate hardening effects. Metallographic observation showed that the microstructure of T2 copper changed from equiaxed grains to twins and the interaction between the dislocation slip zone grain boundary and twins promoted the super plasticity distortion in T2 copper.

High Strain Rate Compressive Behavior of Micro-Fibre Reinforced Fine Grained Cementitious Composite

2018 ◽  
Vol 276 ◽  
pp. 140-147
Author(s):  
Martina Drdlová ◽  
Miloslav Popovič ◽  
René Čechmánek
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Compressive Strain ◽  
Fibre Reinforcement ◽  
Strain Rates ◽  
Cementitious Composite ◽  
Compressive Behavior ◽  
Hopkinson Pressure Bar

This paper presents an experimental study on the high strain rate compressive behavior of micro-fibre reinforced ultrahigh performance cementitious composite, which is intended to be used as a matrix for slurry infiltrated fibre concrete (SIFCON). Cementitious composite specimens with 5 different types of microfibres, namely aramid, carbon, wollastonite, polypropylene and glass in amounts of 1.5-2.0% by volume were prepared and investigated. Split Hopkinson pressure bar (SHPB) equipment was used to determine the cementitious composite behavior at strain rates up to 1600 s-1. Quasistatic tests were performed, as well and ratios of these properties at high strain rates to their counterparts at static loading were compared. The dynamic increase factors were calculated. Strain rate sensitivity was observed - compressive strength was found to be increased with strain rate for all tested specimens. Peak stress values, critical compressive strain and post peak behaviour varies for specimens with different micro-fibre reinforcement, which allows to find the optimal reinforcement for high strain rate impacted structures.

High strain-rate behavior of natural fiber-reinforced polymer composites

2011 ◽  
Vol 46 (9) ◽  
pp. 1051-1065 ◽  
Author(s):  
Wonsuk Kim ◽  
Alan Argento ◽  
Ellen Lee ◽  
Cynthia Flanigan ◽  
Daniel Houston ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
High Strain Rate ◽  
Strain Rate ◽  
Polymer Composites ◽  
Natural Fiber ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Natural Fibers ◽  
Hopkinson Pressure Bar ◽  
Stress Strain

The high strain-rate constitutive behavior of polymer composites with various natural fibers is studied. Hemp, hemp/glass hybrid, cellulose, and wheat straw-reinforced polymeric composites have been manufactured, and a split-Hopkinson pressure bar apparatus has been designed to measure the dynamic stress–strain response of the materials. Using the apparatus, compressive stress–strain curves have been obtained that reveal the materials’ constitutive characteristics at strain rates between 600 and 2400 strain/s. Primary findings indicate that natural fibers in thermoset composites dissipate energy at lower levels of stress and higher strain than glass-reinforced composites. In the case of thermoplastic matrices, the effect on energy dissipation of natural fibers vs. conventional talc reinforcements is highly dependent on resin properties. Natural fibers in polypropylene homopolymer show improved reinforcement but have degraded energy dissipation compared to talc. Whereas in polypropylene copolymer, natural fibers result in improved energy dissipation compared to talc. These data are useful for proper design, analysis, and simulation of lightweight biocomposites.

Sign in / Sign up

Export Citation Format

Share Document