Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources, Part I: Theoretical Investigation

2003 ◽  
Vol 125 (2) ◽  
pp. 218-222 ◽  
Author(s):  
Gunnar Tamm ◽  
D. Yogi Goswami ◽  
Shaoguang Lu ◽  
Afif A. Hasan
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Waste Heat ◽  
Thermal Power ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Second Law ◽  
Water Mixture ◽  
Parametric Studies ◽  
Intensive Investigation

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or as an independent cycle using low temperature sources such as geothermal and solar energy. Initial parametric studies of the cycle showed the potential for the cycle to be optimized for first or second law efficiency, as well as work or cooling output. For a solar heat source, optimization of the second law efficiency is most appropriate, since the spent heat source fluid is recycled through the solar collectors. The optimization results verified that the cycle could be optimized. Theoretical results were extended to include realistic irreversibilities in the cycle, in preparation for the experimental study.

A Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources: Part I — Theoretical Investigation

Solar Energy ◽  
2002 ◽  
Author(s):  
Gunmar Tamm ◽  
D. Yogi Goswami ◽  
Shaoguang Lu ◽  
Afif A. Hasan
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Waste Heat ◽  
Thermal Power ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Second Law ◽  
Water Mixture ◽  
Reduced Gradient Method ◽  
Generalized Reduced Gradient

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or an independent cycle using low temperature sources such as geothermal and solar energy. Initial parametric studies of the cycle showed the potential for the cycle to be optimized for first or second law efficiency, as well as work or cooling output. For a solar heat source, optimization of the second law efficiency is most appropriate, since the spent heat source fluid is recycled through the solar collectors. The optimization results verified that the cycle could be optimized using the Generalized Reduced Gradient method. Theoretical results were extended to include realistic irreversibilities in the cycle, in preparation for the experimental study.

A Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources: Part II — Experimental Investigation

Solar Energy ◽  
2002 ◽  
Author(s):  
Gunmar Tamm ◽  
D. Yogi Goswami
Keyword(s):  
Low Temperature ◽  
System Analysis ◽  
Waste Heat ◽  
Thermal Power ◽  
Experimental System ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Water Mixture ◽  
Theoretical Simulation ◽  
Intensive Investigation

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or an independent cycle using low temperature sources such as geothermal and solar energy. An experimental system was constructed to demonstrate the feasibility of the cycle and to compare the experimental results with the theoretical simulation. Results showed that the vapor generation and absorption condensation processes work experimentally, exhibiting expected trends, but with deviations from ideal and equilibrium modeling. The potential for combined turbine work and refrigeration output was evidenced in operating the system. Analysis of losses showed where improvements could be made, in preparation for further testing over a broader range of operating parameters.

Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources, Part II: Experimental Investigation

2003 ◽  
Vol 125 (2) ◽  
pp. 223-229 ◽  
Author(s):  
Gunnar Tamm ◽  
D. Yogi Goswami
Keyword(s):  
Low Temperature ◽  
System Analysis ◽  
Waste Heat ◽  
Thermal Power ◽  
Experimental System ◽  
Thermodynamic Cycle ◽  
Operating Conditions ◽  
Working Fluid ◽  
Water Mixture ◽  
Theoretical Simulation

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or as an independent cycle using low temperature sources such as geothermal and solar energy. An experimental system was constructed to demonstrate the feasibility of the cycle and to compare the experimental results with the theoretical simulation. Results showed that the vapor generation and absorption condensation processes work experimentally, exhibiting expected trends, but with deviations from ideal and equilibrium modeling. The potential for combined turbine work and refrigeration output was evidenced in operating the system. Analysis of losses showed where improvements could be made, in preparation for further testing over a broader range of operating conditions.

A New Combined Power and Cooling Cycle for Low Temperature Heat Sources

2003 ◽  
Author(s):  
D. Y. Goswami ◽  
Gunnar Tamm ◽  
Sanjay Vijayaraghavan
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Waste Heat ◽  
Experimental System ◽  
Operating Conditions ◽  
Working Fluid ◽  
Second Law ◽  
Heat Sources ◽  
Vapor Generation ◽  
Temperature Heat

A new thermodynamic cycle has been developed for the simultaneous production of power and cooling from low temperature heat sources. The proposed cycle combines the Rankine and absorption refrigeration cycles, providing power and cooling in desired ratios to best suit the application. A binary mixture of ammonia and water is used as the working fluid, providing a good thermal match with the sensible heat source over a range of boiling temperatures. Due to its low boiling point, the ammonia-rich vapor expands to refrigeration temperatures while work is extracted through the turbine. Absorption condensation of the vapor back into the bulk solution occurs near ambient temperatures. The proposed cycle is suitable as a bottoming cycle using waste heat from conventional power generation systems, or can utilize low temperature solar or geothermal renewable resources. The cycle can be scaled to residential, commercial or industrial uses, providing power as the primary goal while satisfying some of the cooling requirements of the application. The cycle is under both theoretical and experimental investigations. Initial parametric studies of how the cycle performs at various operating conditions showed the potential for the cycle to be optimized. Optimization studies performed over a range of heat source and heat sink temperatures showed that the cycle could be optimized for maximum work or cooling output, or for first or second law efficiencies. Depending on the heat source temperatures, as much as half of the output may be obtained as refrigeration under optimized conditions, with refrigeration temperatures as low as 205 K being achievable. Maximum second law efficiencies over 60% have been found with the heat source between 350 and 450 K. An experimental system was constructed to verify the theoretical results and to demonstrate the feasibility of the cycle. The investigation focused on the vapor generation and absorption processes, setting up for the power and refrigeration studies to come later. The turbine was simulated with an equivalent expansion process in this initial phase of testing. Results showed that the vapor generation and absorption processes work experimentally, over a range of operating conditions and in simulating the sources and sinks of interest. The potential for combined work and cooling output was evidenced in operating the system. Comparison to ideally simulated results verified that there are thermal and flow losses present, which were assessed to make both improvements in the experimental system and modifications in the simulations to include realistic losses.

Optimization of a Novel Combined Power/Refrigeration Thermodynamic Cycle

Solar Energy ◽  
2002 ◽  
Author(s):  
Shaoguang Lu ◽  
D. Yogi Goswami
Keyword(s):  
Waste Heat ◽  
Thermodynamic Cycle ◽  
Cycle Performance ◽  
Working Fluid ◽  
Second Law ◽  
Optimum Conditions ◽  
Ambient Temperatures ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient ◽  
Performance Conditions

A novel combined power/refrigeration thermodynamic cycle is optimized for thermal performance in this paper. The cycle uses ammonia-water binary mixture as a working fluid and can be driven by various heat sources, such as solar, geothermal and low temperature waste heat. It could produce power as well as refrigeration with power output as a primary goal. The optimization program, which is based on the Generalized Reduced Gradient (GRG) algorithm, can be used to optimize for different objective functions. Examples that maximize second law efficiency, work output and refrigeration output are presented, showing the cycle may be optimized for any desired performance parameter. In addition, cycle performance over a range of ambient temperatures was investigated. It was found that for a source temperature of 360K, which is in the range of flat plate solar collectors, both power and refrigeration outputs are achieved under optimum conditions. All performance parameters, including first and second law efficiencies, power and refrigeration output decrease as the ambient temperature goes up. On the other hand, for a source of 440K, optimum conditions do not provide any refrigeration. However, refrigeration can be obtained even for this temperature under non-optimum performance conditions.

A Totally Heat-Driven Refrigeration System Using Low-Temperature Heat Sources for Low-Temperature Applications

2019 ◽  
Vol 27 (02) ◽  
pp. 1950012 ◽  
Author(s):  
Zeynab Seyfouri ◽  
Mehran Ameri ◽  
Mozaffar Ali Mehrabian
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Water Mixture ◽  
Refrigeration System ◽  
Power Requirement ◽  
Temperature Heat

In the present study, a totally heat-driven refrigeration system is proposed and thermodynamically analyzed. This system uses a low-temperature heat source such as geothermal energy or solar energy to produce cooling at freezing temperatures. The proposed system comprises a Rankine cycle (RC) and a hybrid GAX (HGAX) refrigeration cycle, in which the RC provides the power requirement of the HGAX cycle. An ammonia–water mixture is used in both RC and HGAX cycles as the working fluid. A comparative study is conducted in which the proposed system is compared with two other systems using GAX cycle and/or a single stage cycle, as the refrigeration cycle. The study shows that the proposed system is preferred to produce cooling at temperatures from 2∘C to [Formula: see text]C. A detailed parametric analysis of the proposed system is carried out. The results of the analysis show that the system can produce cooling at [Formula: see text]C using a low-temperature heat source at 133.5∘C with the exergy efficiency of about 20% without any input power. By increasing the heat source temperature to 160∘C, an exergy efficiency of 25% can be achieved.

A Computer Program for Working Fluid Selection of Low Temperature Organic Rankine Cycle

2015 ◽  
Author(s):  
Muhammad Ansab Ali ◽  
Tariq Saeed Khan ◽  
Ebrahim Al Hajri ◽  
Zahid H. Ayub
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Computer Program ◽  
Fossil Fuels ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Power Production ◽  
Working Fluid ◽  
Low Grade

Fossil fuels are continuously depleting while the global energy demand is growing at a fast rate. Additionally, fossil fuels based power plants contribute to environmental pollution. Search for alternate energy resources and use of industrial waste heat for power production are attractive topics of interest these days. One way of enhancing power production and decreasing the environmental impact is by recuperating and utilizing low grade thermal energy. In recent years, research on use of organic Rankine cycle (ORC) has gained popularity as a promising technology for conversion of heat into useful work or electricity. Due to simple structure of ORC system, it can be easily integrated with any energy source like geothermal energy, solar energy and waste heat. A computer program has been developed in engineering equation solver (EES) environment that analyzes and selects appropriate working fluid for organic Rankine cycle design based on available heat sources. For a given heat source, the program compares energy and exergy performance of various working fluids. The program also includes recuperator performance analysis and compares its effectiveness on the overall thermal performance of the Rankine cycle. This program can assist in preliminary design of ORC with respect to best performing refrigerant fluid selection for the given low temperature heat source.

scholarly journals Experimental investigation of the ecological hybrid refrigeration cycle

2014 ◽  
Vol 35 (3) ◽  
pp. 145-154
Author(s):  
Piotr Cyklis ◽  
Ryszard Kantor ◽  
Tomasz Ryncarz ◽  
Bogusław Górski ◽  
Roman Duda
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Heat Source ◽  
Waste Heat ◽  
Temperature Limit ◽  
Working Fluid ◽  
Temperature Cycle ◽  
Compression System ◽  
High Temperature Limit ◽  
University Of Technology

Abstract The requirements for environmentally friendly refrigerants promote application of CO2 and water as working fluids. However there are two problems related to that, namely high temperature limit for CO2 in condenser due to the low critical temperature, and low temperature limit for water being the result of high triple point temperature. This can be avoided by application of the hybrid adsorption-compression system, where water is the working fluid in the adsorption high temperature cycle used to cool down the CO2 compression cycle condenser. The adsorption process is powered with a low temperature renewable heat source as solar collectors or other waste heat source. The refrigeration system integrating adsorption and compression system has been designed and constructed in the Laboratory of Thermodynamics and Thermal Machine Measurements of Cracow University of Technology. The heat source for adsorption system consists of 16 tube tulbular collectors. The CO2 compression low temperature cycle is based on two parallel compressors with frequency inverter. Energy efficiency and TEWI of this hybrid system is quite promising in comparison with the compression only systems.

Parametric Study of a Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources

2009 ◽  
Author(s):  
Ricardo Vasquez Padilla ◽  
Gokmen Demirkaya ◽  
D. Yogi Goswami ◽  
Elias L. Stefanakos
Keyword(s):  
Low Temperature ◽  
Parametric Study ◽  
Waste Heat ◽  
Ammonia Concentration ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Working Fluid ◽  
Basic Solution ◽  
Water Mixture

A combined power/cooling cycle, which combines the Rankine and absorption refrigeration cycles, uses ammonia-water mixture as a working fluid and produces power and refrigeration while power is the primary goal. This cycle, also known as the Goswami Cycle, can be used as a bottoming cycle using waste heat from a conventional power cycle or as an independent cycle using low temperature sources such as geothermal and solar energy. This paper presents a parametric analysis of the combined cycle. Parametric study of the cycle was carried out in the commercial software Chemcad 6.1. The thermodynamic property data used in simulations were validated with experimental data. Chemcad model was also compared with simulations previously carried out in the process simulator Aspen Plus. The agreement between the two sets has proved the accuracy of the model developed in Chemcad. Then, optimum operating conditions were found for a range of ammonia concentration in the basic solution, isentropic expander efficiency and boiler pressure. It is shown that the cycle can be optimized for net work, cooling output, effective first and exergy efficiencies.

Experimental Investigations of Oscillatory Fluctuation in an Ammonia-Water Mixture Turbine System

2005 ◽  
Author(s):  
Yoshiharu Amano ◽  
Keisuke Kawanishi ◽  
Takumi Hashizume
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Flow Rate ◽  
Mass Fraction ◽  
Working Fluid ◽  
Experimental Investigations ◽  
Water Mixture ◽  
Kalina Cycle ◽  
Ammonia Water ◽  
Temperature Heat

This paper reports results from experimental investigations of the dynamics of an ammonia-water mixture turbine system. The mixture turbine system features Kalina Cycle technology [1]. The working fluid is an ammonia-water mixture (AWM), which enhances the power production recovered from the low-temperature heat source [2], [3]. The Kalina Cycle is superior to the Rankine Cycle for a low temperature heat source [4], [5]. The ammonia-water mixture turbine system has distillation-condensation processes. The subsystem produces ammonia-rich vapor and a lean solution at the separator, and the vapor and the solution converge at the condenser. The mass balance of ammonia and water is maintained by a level control at the separator and reservoirs at the condensers. Since the ammonia mass fraction in the cycle has a high sensitivity to the evaporation/condensation pressure and vapor flow rate in the cycle, the pressure change gives rise to a flow rate change and then level changes in the separators and reservoirs and vice versa. From the experimental investigation of the ammonia-water mixture turbine system, it was observed that the sensitivity of the evaporating flow rate and solution liquid density in the cycle is very high, and those sensitivity factors are affected by the ammonia-mass fraction. This paper presents the experimental results of a study on the dynamics of the distillation process of the ammonia-water mixture turbine system and uses the results of investigation to explain the mechanism of the unstable fluctuation in the system.

Sign in / Sign up

Export Citation Format

Share Document