Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies

2003 ◽  
Vol 125 (1) ◽  
pp. 138-145 ◽  
Author(s):  
Yuh J. Chao ◽  
X. Qi ◽  
W. Tang
Keyword(s):  
Heat Transfer ◽  
Friction Stir Welding ◽  
Temperature Fields ◽  
Transient Temperature ◽  
Friction Stir ◽  
Heat Flows ◽  
Numerical Studies ◽  
Weld Residual Stress ◽  
Joining Process

In the friction stir welding (FSW) process, heat is generated by friction between the tool and the workpiece. This heat flows into the workpiece as well as the tool. The amount of heat conducted into the workpiece determines the quality of the weld, residual stress and distortion of the workpiece. The amount of the heat that flows to the tool dictates the life of the tool and the capability of the tool for the joining process. In this paper, we formulate the heat transfer of the FSW process into two boundary value problems (BVP)—a steady state BVP for the tool and a transient BVP for the workpiece. To quantify the physical values of the process the temperatures in the workpiece and the tool are measured during FSW. Using the measured transient temperature fields finite element numerical analyses were performed to determine the heat flux generated from the friction to the workpiece and the tool. Detailed temperature distributions in the workpiece and the tool are presented. Discussions relative to the FSW process are then given. In particular, the results show that (1) the majority of the heat generated from the friction, i.e., about 95%, is transferred into the workpiece and only 5% flows into the tool and (2) the fraction of the rate of plastic work dissipated as heat is about 80%.

SYSTEM INTEGRATION OF A FRICTION STIR WELDING MACHINE WITH A CUSTOMIZED TRAVERSE CONTROLLED TABLE

2015 ◽  
Vol 76 (4) ◽  
Author(s):  
Nur’ Amirah Busu ◽  
Mohammad Shamil Jaffarullah ◽  
Mohd Saiful Bahari Shaari ◽  
Cheng Yee Low ◽  
Armansyah Armansyah ◽  
...  
Keyword(s):  
Friction Stir Welding ◽  
System Integration ◽  
Process Variations ◽  
High Quality ◽  
Friction Stir ◽  
Weld Microstructure ◽  
Industry Sectors ◽  
Joining Process ◽  
Alloy 6061

Friction stir welding (FSW) is a promising joining process that offers a high potential to be widely applied across industry sectors such as automotive, shipbuilding and aerospace. Nevertheless the path force can vary significantly due to the fluctuation of workpiece temperature and other process variations, thus results in inconsistency in weld microstructure. This paper describes the system integration of a FSW machine with a focus on the development of a traverse controlled table in order to produce a consistent temperature and path force along the weld path in FSW process. Aluminium alloy 6061 plate and a FSW’s tool with a flat shoulder and conical pin without thread are used. Advantages of such an approach include wormhole generation will be eliminated, a high quality of weld microstructure can be produced and the synchronization between the temperature and path force can be obtained. 

scholarly journals Friction Stir Welding of Aerospace Alloys

2019 ◽  
Vol 48 (1) ◽  
pp. 37-46
Author(s):  
Akshansh Mishra ◽  
Devarrishi Dixit
Keyword(s):  
Friction Stir Welding ◽  
Welding Process ◽  
Space Vehicles ◽  
Friction Stir ◽  
Aerospace Applications ◽  
Aerospace Alloys ◽  
Fuel Tanks ◽  
Higher Temperature ◽  
Solid State Joining ◽  
Joining Process

Friction Stir Welding (FSW) is a solid state joining process which possesses a great potential to revolutionise the aerospace industries. Distinctive materials are selected as aerospace alloys to withstand higher temperature and loads. Sometimes these alloys are difficult to join by a conventional welding process but they are easily welded by FSW process. The FSW process in aerospace applications can be used for: aviation for fuel tanks, repair of faulty welds, cryogenic fuel tanks for space vehicles. Eclipse Aviation, for example, has reported dramatic production cost reductions with FSW when compared to other joining technologies. This paper will discuss about the mechanical and microstructure properties of various aerospace alloys which are joined by FSW process.

Dimensional Analysis of Thermal Fields Surrounding Friction Stir Welding Process

2014 ◽  
Author(s):  
Lewis N. Payton ◽  
Vishnu Vardhan Chandrasekaran ◽  
Wesley S. Hunko
Keyword(s):  
Aluminum Alloy ◽  
Friction Stir Welding ◽  
Welding Process ◽  
Temperature Fields ◽  
Analytical Comparison ◽  
Friction Stir ◽  
Thermal Fields ◽  
Designed Experiment ◽  
Pi Theorem ◽  
Alloy 6061

A dimensionless correlation is developed based on Buckingham’s Pi-Theorem to estimate the temperature fields generated by the movement of a tool during the Friction Stir Welding of an aluminum alloy (6061-T6). Symmetrical thermocouple measurements are taken during a statistically designed experiment using different factor levels (RPM, Traverse, etc). Analytical comparison (using multivariate ANOVA) validates the predicted dimensionless correlation including the often-reported difference between the advancing versus retreating side of the Friction Stir Tool.

scholarly journals Friction Stir Welding with Low-Medium-High Tool Travel Speed of 0.95 Mg-Al-Alloy and Pure Copper: Electrochemical and Surface Studies

2018 ◽  
Author(s):  
Neetesh Soni ◽  
Ambrish Singh
Keyword(s):  
Friction Stir Welding ◽  
Process Parameters ◽  
Pure Copper ◽  
Travel Speed ◽  
Localized Corrosion ◽  
Al Alloy ◽  
Kelvin Probe ◽  
Friction Stir ◽  
Surface Optical ◽  
Joining Process

The aim of this work is to assess the influence of Friction Stir Welding (FSW), process parameters, optimized tool traveling speed, and corrosion resistance of the 0.95 Mg-Al-alloy and pure copper weldment. Samples of aluminum-copper with and without deformation were characterized to investigate the metallurgical effects created during the welding deformation process. Effect of process parameters on microstructure and corrosion rate have been investigated for all the samples. All the electrochemical and polarization tests were done in 3.5 wt.% NaCl solution. Scanning Kelvin Probe (SKP) was done to detect the localized corrosion on the surface. Optical micrography observation indicated that the primary α-Al phase, which was formed during solidification can effectively limit the growth of Cu9Al4 phase. Finer acicular α-Al precipitates were observed in CuAl matrix during joining process that tends to coarser with the increase in tools travel speed. The electrochemical and polarization results showed that among all the tool travelling speed the specimen joined at tool travelling speed of 40 mm/min shows the best non-corrosive property.

scholarly journals Influence of Mx-Trivex, A-Skew, Three Flat Threaded and Concave Shouldered Mx-Triflute Tool Pin Profiles on Tensile Properties and Fractural Behaviour of Aa 6082-T6 Weldments During Friction Stir Welding

2020 ◽  
Vol 9 (4) ◽  
pp. 1376-1384
Keyword(s):  
Friction Stir Welding ◽  
Tensile Test ◽  
Weld Zone ◽  
Base Material ◽  
Traverse Speed ◽  
Friction Stir ◽  
Tool Pin ◽  
Solid State Joining ◽  
Joining Process ◽  
Brass Wire

Friction Stir Welding (FSW) is a topical and propitious solid-state joining process producing economical and strengthened joints of age-hardened and heat-treatable Aluminium Alloy AA 6082-T6. Mechanical and fractural behaviour of weldments were investigated in order to find crack initiation and necking on the weld zone thereby perceiving the complete behaviour of fracture occurred near the weld zone. Weldments are fabricated by employing four tool pin profiles namely MX-TRIVEX, A-SKEW, Three flat threaded and Concave shouldered MX-TRIFLUTE tools at various rotational speeds 1000 rpm, 1200 rpm and 1400 rpm at single traverse speed 25 mm/min. EXCETEX-EX-40 CNC wire cut EDM with 0.25 mm brass wire diameter has been employed to perform the extraction of tensile test specimens from the weldments according to ASTM E8M-04 standard. Tensile test was performed on elctromechanically servo controlled TUE-C-200 (UTM machine) according to ASTM B557-16 standards Maximum Ultimate Tensile Strength (UTS) of 172.33 MPa (55.5% of base material) and 0.2% Yield Stress (YS) of 134.10 MPa (51.5% of base material) were obtained by using A-SKEW at 1400 rpm, 25 mm/min and maximum % Elongation (%El) of 11.33 (113.3% of base material) was obtained at MX-TRIVEX at 1000 rpm, 25 mm/min. Minimum UTS of 131.16 MPa (42.30% of base material) and 0.2% YS of 105.207 MPa (40.46% of base material )were obtained by using Concave shouldered MX-TRIFLUTE at 1400 rpm, 25 mm/min. Minimum % El of 5.42 ( 54.2% of base material) was obtained by using A-SKEW at 1000 rpm, 25 mm/min.

Multiaxial Mechanical Strength of AA-2024-T3 Aluminium Alloy Sheets Joined by Friction Stir Welding Processes

2009 ◽  
Vol 83-86 ◽  
pp. 1243-1250 ◽  
Author(s):  
R.L.L.P. Cerveira ◽  
G. F. Batalha
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Short Review ◽  
Multiaxial Loading ◽  
Angle Variation ◽  
Friction Stir ◽  
Aa 2024 ◽  
Aeronautical Industry ◽  
Welding Processes ◽  
Joining Process

The aim is to analyze a junction produced by a Friction Stir Welding (FSW) joining process under multiaxial loading, employing a modified Arcan test that allows an angle variation of the loading in order to evaluate the failure of the FSW weldment as compared to the base material. A short review of the earlier studies and relevant theories about the FSW processes and fracture modes I and II under multiaxial loading are presented and were experimentally evaluated for an AA2024-T3 aluminum alloy sheets (t = 1.6 mm) processed by FSW. The results obtained can serve as a basis to compare the junctions made using FSW and conventional joint methods such as rivets (very common practice in the aeronautical industry).

scholarly journals A Modified Analytical Heat Source Model for Numerical Simulation of Temperature Field in Friction Stir Welding

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Xiangqian Liu ◽  
Yan Yu ◽  
Shengli Yang ◽  
Huijie Liu
Keyword(s):  
Heat Flux ◽  
Friction Stir Welding ◽  
Analytical Model ◽  
Heat Generation ◽  
Tilt Angle ◽  
Temperature Fields ◽  
Analytical Models ◽  
Maximum Temperature ◽  
Thermal Cycles ◽  
Friction Stir

In the conventional analytical model used for heat generation in friction stir welding (FSW), the heat generated at the pin/workpiece interface is assumed to distribute uniformly in the pin volume, and the heat flux is applied as volume heat. Besides, the tilt angle of the tool is assumed to be zero for simplicity. These assumptions bring about simulating deviation to some extent. To better understand the physical nature of heat generation, a modified analytical model, in which the nonuniform volumetric heat flux and the tilt angle of the tool were considered, was developed. Two analytical models are then implemented in the FEM software to analyze the temperature fields in the plunge and traverse stage during FSW of AA6005A-T6 aluminum hollow extrusions. The temperature distributions including the maximum temperature and heating rate between the two models are different. The thermal cycles in different zones further revealed that the peak temperature and temperature gradient are very different in the high-temperature region. Comparison shows that the modified analytical model is accurate enough for predicting the thermal cycles and peak temperatures, and the corresponding simulating precision is higher than that of the conventional analytical model.

scholarly journals Review on Friction Stir Processed TIG and Friction Stir Welded Dissimilar Alloy Joints

Metals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 142 ◽  
Author(s):  
Sipokazi Mabuwa ◽  
Velaphi Msomi
Keyword(s):  
Friction Stir Welding ◽  
Friction Stir Processing ◽  
Aluminium Alloys ◽  
Processing Technique ◽  
Inert Gas ◽  
Tungsten Inert Gas Welding ◽  
Friction Stir ◽  
Dissimilar Alloys ◽  
The Status

There is an increase in reducing the weight of structures through the use of aluminium alloys in different industries like aerospace, automotive, etc. This growing interest will lead towards using dissimilar aluminium alloys which will require welding. Currently, tungsten inert gas welding and friction stir welding are the well-known techniques suitable for joining dissimilar aluminium alloys. The welding of dissimilar alloys has its own dynamics which impact on the quality of the weld. This then suggests that there should be a process which can be used to improve the welds of dissimilar alloys post their production. Friction stir processing is viewed as one of the techniques that could be used to improve the mechanical properties of a material. This paper reports on the status and the advancement of friction stir welding, tungsten inert gas welding and the friction stir processing technique. It further looks at the variation use of friction stir processing on tungsten inert gas and friction stir welded joints with the purpose of identifying the knowledge gap.

Sign in / Sign up

Export Citation Format

Share Document