Aerodynamic Design and Performance of Aspirated Airfoils

2003 ◽  
Vol 125 (1) ◽  
pp. 141-148 ◽  
Author(s):  
Ali Merchant
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
High Loading ◽  
Navier Stokes ◽  
Aerodynamic Design ◽  
Design Studies ◽  
Controlled Diffusion ◽  
And Performance ◽  
The Impact ◽  
Profile Loss

The impact of boundary layer aspiration, or suction, on the aerodynamic design and performance of turbomachinery airfoils is discussed in this paper. Aspiration is studied first in the context of a controlled diffusion cascade, where the effect of discrete aspiration on loading levels and profile loss is computationally investigated. Blade design features which are essential in achieving high loading and minimizing the aspiration requirement are described. Design studies of two aspirated compressor stages and an aspirated turbine exit guide vane using three dimensional Navier-Stokes calculations are presented. The calculations show that high loading can be achieved over most of the blade span with a relatively small amount of aspiration. Three dimensional effects close to the endwalls are shown to degrade the performance to varying degrees depending on the loading level.

Aerodynamic Design and Performance of Aspirated Airfoils

2002 ◽  
Author(s):  
Ali Merchant
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
High Loading ◽  
Navier Stokes ◽  
Aerodynamic Design ◽  
Design Studies ◽  
Controlled Diffusion ◽  
And Performance ◽  
The Impact ◽  
Profile Loss

The impact of boundary layer aspiration, or suction, on the aerodynamic design and performance of turbomachinery airfoils is discussed in this paper. Aspiration is studied first in the context of a controlled diffusion cascade, where the effect of discrete aspiration on loading levels and profile loss is computationally investigated. Blade design features which are essential in achieving high loading and minimizing the aspiration requirement are described. Design studies of two aspirated compressor stages and an aspirated turbine exit guide vane using three dimensional Navier-Stokes calculations are presented. The calculations show that high loading can be achieved over most of the blade span with a relatively small amount of aspiration. Three dimensional effects close to the endwalls are shown to degrade the performance to varying degrees depending on the loading level.

A Computational Analysis of Flow Field in Twin-Track Subway Tunnel to Improve Air Quality

2013 ◽  
Vol 319 ◽  
pp. 599-604
Author(s):  
Makhsuda Juraeva ◽  
Kyung Jin Ryu ◽  
Sang Hyun Jeong ◽  
Dong Joo Song
Keyword(s):  
Air Quality ◽  
Computational Model ◽  
Stokes Equations ◽  
Ventilation System ◽  
Three Dimensional ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Subway Tunnel ◽  
Air Supply ◽  
And Performance

A computational model of existing Seoul subway tunnelwas analyzed in this research. The computational model was comprised of one natural ventilationshaft, two mechanical ventilationshafts, one mechanical airsupply, a twin-track tunnel, and a train. Understanding the flow pattern of the train-induced airflow in the tunnel was necessary to improve ventilation performance. The research objective wasto improve the air quality in the tunnel by investigating train-induced airflow in the twin-track subway tunnel numerically. The numerical analysis characterized the aerodynamic behavior and performance of the ventilation system by solving three-dimensional turbulent Reynolds-averaged Navier-Stokes equations. ANSYS CFX software was used for the computations. The ventilation and aerodynamic characteristics in the tunnel were investigated by analyzing the mass flowrateat the exits of the ventilation mechanicalshafts. As the train passed the mechanical ventilation shafts, the amount of discharged-air in the ventilationshafts decreased rapidly. The air at the exits of the ventilation shafts was gradually recovered with time, after the train passed the ventilation shafts. The developed mechanical air-supply for discharging dusty air and supplying clean airwas investigated.The computational results showed that the developed mechanical air-supplycould improve the air quality in the tunnel.

scholarly journals Computation of Three-Dimensional, Rotational Flow Through Turbomachinery Blade Rows for Improved Aerodynamic Design Studies

1986 ◽  
Author(s):  
S. V. Subramanian ◽  
R. Bozzola ◽  
Louis A. Povinelli
Keyword(s):  
Three Dimensional ◽  
Maximum Flow ◽  
Cost Effective ◽  
Computer Code ◽  
Integration Scheme ◽  
Aerodynamic Design ◽  
Design Studies ◽  
Flow Equations ◽  
Transonic Compressor ◽  
Numerical Predictions

The performance of a three dimensional computer code developed for predicting the flowfield in stationary and rotating turbomachinery blade rows is described in this study. The four stage Runge-Kutta numerical integration scheme is used for solving the governing flow equations and yields solution to the full, three dimensional, unsteady Euler equations in cylindrical coordinates. This method is fully explicit and uses the finite volume, time marching procedure. In order to demonstrate the accuracy and efficiency of the code, steady solutions were obtained for several cascade geometries under widely varying flow conditions. Computed flowfield results are presented for a fully subsonic turbine stator and a low aspect ratio, transonic compressor rotor blade under maximum flow and peak efficiency design conditions. Comparisons with Laser Anemometer measurements and other numerical predictions are also provided to illustrate that the present method predicts important flow features with good accuracy and can be used for cost effective aerodynamic design studies.

The Extension of a Solution-Adaptive Three-Dimensional Navier–Stokes Solver Toward Geometries of Arbitrary Complexity

1993 ◽  
Vol 115 (2) ◽  
pp. 283-295 ◽  
Author(s):  
W. N. Dawes
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Centrifugal Impeller ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Wide Range ◽  
Nozzle Guide Vane ◽  
Recent Developments ◽  
Nozzle Guide

This paper describes recent developments to a three-dimensional, unstructured mesh, solution-adaptive Navier–Stokes solver. By adopting a simple, pragmatic but systematic approach to mesh generation, the range of simulations that can be attempted is extended toward arbitrary geometries. The combined benefits of the approach result in a powerful analytical ability. Solutions for a wide range of flows are presented, including a transonic compressor rotor, a centrifugal impeller, a steam turbine nozzle guide vane with casing extraction belt, the internal coolant passage of a radial inflow turbine, and a turbine disk cavity flow.

The Impact of Gas Modeling in the Numerical Analysis of a Multistage Gas Turbine

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Filippo Rubechini ◽  
Michele Marconcini ◽  
Andrea Arnone ◽  
Massimiliano Maritano ◽  
Stefano Cecchi
Keyword(s):  
Gas Turbine ◽  
Flow Direction ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Ratio Distribution ◽  
Real Gas ◽  
Turbine Performance ◽  
Wall Boundary Conditions ◽  
Heavy Duty Gas Turbine ◽  
The Impact

In this work a numerical investigation of a four stage heavy-duty gas turbine is presented. Fully three-dimensional, multistage, Navier-Stokes analyses are carried out to predict the overall turbine performance. Coolant injections, cavity purge flows, and leakage flows are included in the turbine modeling by means of suitable wall boundary conditions. The main objective is the evaluation of the impact of gas modeling on the prediction of the stage and turbine performance parameters. To this end, four different gas models were used: three models are based on the perfect gas assumption with different values of constant cp, and the fourth is a real gas model which accounts for thermodynamic gas properties variations with temperature and mean fuel∕air ratio distribution in the through-flow direction. For the real gas computations, a numerical model is used which is based on the use of gas property tables, and exploits a local fitting of gas data to compute thermodynamic properties. Experimental measurements are available for comparison purposes in terms of static pressure values at the inlet∕outlet of each row and total temperature at the turbine exit.

scholarly journals Darmstadt Rotor No. 2, II: Design of Leaning Rotor Blades

2003 ◽  
Vol 9 (6) ◽  
pp. 385-391
Author(s):  
Jörg Bergner ◽  
Dietmar K. Hennecke ◽  
Martin Hoeger ◽  
Karl Engel
Keyword(s):  
Mechanical Stability ◽  
Three Dimensional ◽  
Stability Limit ◽  
Operating Conditions ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Structural Constraints ◽  
Transonic Compressor ◽  
Aero Engines ◽  
The Impact

For Darmstadt University of Technology's axial singlestage transonic compressor rig, a new three-dimensional aft-swept rotor was designed and manufactured at MTU Aero Engines in Munich, Germany. The application of carbon fiber–reinforced plastic made it possible to overcome structural constraints and therefore to further increase the amount of lean and sweep of the blade. The aim of the design was to improve the mechanical stability at operation that is close to stall.To avoid the hazard of rubbing at the blade tip, which is found especially at off-design operating conditions close to the stability limit of the compression system, aft-sweep was introduced together with excessive backward lean.This article reports an investigation of the impact of various amounts of lean on the aerodynamic behavior of the compressor stage on the basis of steady-state Navier-Stokes simulations. The results indicate that high backward lean promotes an undesirable redistribution of mass flow and gives rise to a basic change in the shock pattern, whereas a forward-leaning geometry results in the development of a highly back-swept shock front. However, the disadvantage is a decrease in shock strength and efficiency.

A Comparative Study of Optimisation Methods for Aerodynamic Design of Turbomachinery Blades

2000 ◽  
Author(s):  
Shahrokh Shahpar
Keyword(s):  
Stokes Equations ◽  
Guide Vane ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Analysis Tool ◽  
Geometrical Constraints ◽  
Gradient Based ◽  
Turbomachinery Blades ◽  
Optimisation Methods ◽  
Nozzle Guide

A new approach to three-dimensional design of turbomachinery blades is presented. A number of heuristic and gradient based optimisers are used in conjunction with a linear sensitivity analysis tool, FAITH, to re-design a turbine nozzle guide vane. A novel linear approach is used to eliminate the large computational costs usually associated with function evaluations which are essentially solutions to the Navier-Stokes equations. Results are compared with those obtained previously from the inverse design mode of FAITH. With the present approach, it is shown that nonlinear complicated cost functions can be reduced significantly and aerodynamic and geometrical constraints can be handled easily and efficiently.

Reliable and Accurate Prediction of Three-Dimensional Separation in Asymmetric Diffusers Using Large-Eddy Simulation

2009 ◽  
Author(s):  
Hayder Schneider ◽  
Dominic von Terzi ◽  
Hans-Jo¨rg Bauer ◽  
Wolfgang Rodi
Keyword(s):  
Experimental Data ◽  
Reverse Flow ◽  
Separation Bubble ◽  
Pressure Coefficient ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Eddy Simulation ◽  
Large Eddy ◽  
The Impact

Reynolds-Averaged Navier-Stokes (RANS) calculations and Large-Eddy Simulations (LES) of the flow in two asymmetric three-dimensional diffusers were performed. The numerical setup was chosen to be in compliance with previous experiments. The aim of the present study is to find the least expensive method to compute reliably and accurately the impact of geometric sensitivity on the flow. RANS calculations fail to predict both the extent and location of the three-dimensional separation bubble. In contrast, LES is able to determine the amount of reverse flow and the pressure coefficient within the accuracy of experimental data.

Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine

2013 ◽  
Vol 465-466 ◽  
pp. 552-556
Author(s):  
Muhammad Ammar Nik Mutasim ◽  
Nurul Suraya Azahari ◽  
Ahmad Alif Ahmad Adam
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Navier Stokes ◽  
Particle Impact ◽  
Three Dimensional Flow ◽  
Navier Stokes Equation ◽  
Runner Blade ◽  
Computational Fluid Dynamics Cfd ◽  
The Subject ◽  
The Impact

Energy is one of the most important sources in the world especially for developing countries. The subject study is conducted to predict the behaviour of particle due to errosion from the river through the achimedes screw runner and predict the impact of particle toward blade surface. For this reason, computational fluid dynamics (CFD) methods are used. The three-dimensional flow of fluid is numerically analyzed using the Navier-Stokes equation with standard k-ε turbulence model. The reinverse design of archimedes screw blade was refered with the previous researcher. Flow prediction with numerical results such as velocity streamlines, flow pattern and pressure contour for flow of water entering the blade are discussed. This study shows that the prediction of particle impact occurs mostly on the entering surface blade and along the leading edge of the screw runner. Any modification on the design of the screw runner blade can be analyze for further study.

IGV-Rotor Interaction Analysis in a Transonic Compressor Using the Navier-Stokes Equations

1996 ◽  
Author(s):  
Andrea Arnone ◽  
Roberto Pacciani
Keyword(s):  
Stokes Equations ◽  
Interaction Analysis ◽  
Guide Vane ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Inlet Guide Vane ◽  
Operating Characteristics ◽  
Navier Stokes Equations ◽  
Transonic Compressor ◽  
Mass Flow Rates

A recently developed, time-accurate multigrid viscous solver has been extended to handle quasi-three-dimensional effects and applied to the first stage of a modern transonic compressor. Interest is focused on the inlet guide vane (IGV):rotor interaction where strong sources of unsteadiness are to be expected. Several calculations have been performed to predict the stage operating characteristics. Flow structures at various mass flow rates, from choke to near stall, are presented and discussed. Comparisons between unsteady and steady pitch-averaged results are also included in order to obtain indications about the capabilities of steady, multi-row analyses.

Sign in / Sign up

Export Citation Format

Share Document