Specific Hydraulic Conductivity of Corneal Stroma as Seen by Quick-Freeze/Deep-Etch

2000 ◽  
Vol 123 (2) ◽  
pp. 154-161 ◽  
Author(s):  
Darryl Overby ◽  
Jeffrey Ruberti ◽  
Haiyan Gong ◽  
Thomas F. Freddo ◽  
Mark Johnson
Keyword(s):  
Extracellular Matrix ◽  
Hydraulic Conductivity ◽  
Flow Resistance ◽  
Corneal Stroma ◽  
High Flow ◽  
Depth Of Field ◽  
Resistance Characteristic ◽  
Connective Tissues ◽  
Electron Microscopic ◽  
Microscopic Techniques

Previous studies of the hydraulic conductivity of connective tissues have failed to show a correspondence between ultrastructure and specific hydraulic conductivity. We used the technique of quick-freeze/deep-etch to examine the ultrastructure of the corneal stroma and then utilized morphometric studies to compute the specific hydraulic conductivity of the corneal stroma. Our studies demonstrated ultrastructural elements of the extracellular matrix of the corneal stroma that are not seen using conventional electron microscopic techniques. Furthermore, we found that these structures may be responsible for generating the high flow resistance characteristic of connective tissues. From analysis of micrographs corrected for depth-of-field effects, we used Carmen-Kozeny theory to bound a morphometrically determined specific hydraulic conductivity of the corneal stroma between 0.46×10−14 and 10.3×10−14 cm2. These bounds encompass experimentally measured values in the literature of 0.5×10−14 to 2×10−14 cm2. The largest source of uncertainty was due to the depth-of-field estimates that ranged from 15 to 51 nm; a better estimate would substantially reduce the uncertainty of these morphometrically determined values.

scholarly journals Effects of particulates and lipids on the hydraulic conductivity of Matrigel

2008 ◽  
Vol 105 (2) ◽  
pp. 621-628 ◽  
Author(s):  
William J. McCarty ◽  
Melissa F. Chimento ◽  
Christine A. Curcio ◽  
Mark Johnson
Keyword(s):  
Extracellular Matrix ◽  
Hydraulic Conductivity ◽  
Weight Fraction ◽  
Low Density Lipoproteins ◽  
Blood Vessel Wall ◽  
Connective Tissues ◽  
Rigid Particles ◽  
Ldl Particles ◽  
Transmission Electron ◽  
Theoretical Predictions

The hydraulic conductivity of a connective tissue is determined both by the fine ultrastructure of the extracellular matrix and the effects of larger particles in the interstitial space. In this study, we explored this relationship by examining the effects of 30- or 90-nm-diameter latex nanospheres or low-density lipoproteins (LDL) on the hydraulic conductivity of Matrigel, a basement membrane matrix. The hydraulic conductivity of Matrigel with latex nanospheres or LDL particles added at 4.8% weight fraction was measured and compared with the hydraulic conductivity of Matrigel alone. The LDL-derived lipids in the gel were visualized by transmission electron microscopy and were seen to have aggregated into particles up to 500 nm in size. The addition of these materials to the medium markedly decreased its hydraulic conductivity, with the LDL-derived lipids having a much larger effect than did the latex nanospheres. Debye-Brinkman theory was used to predict the effect of addition of particles to the hydraulic conductivity of the medium. The theoretical predictions matched well with the results from adding latex nanospheres to the medium. However, LDL decreased hydraulic conductivity much more than was predicted by the theory. The validation of the theoretical model for rigid particles embedded in extracellular matrix suggests that it could be used to make predictions about the influence of particulates (e.g., collagen, elastin, cells) on the hydraulic conductivity of the fine filamentous matrix (the proteoglycans) in connective tissues. In addition, the larger-than-predicted effects of lipidlike particles on hydraulic conductivity may magnify the pathology associated with lipid accumulation, such as in Bruch's membrane of the retina during macular degeneration and the blood vessel wall in atherosclerosis.

Electrostatic Contribution of the Proteoglycans to the In-Plane Shear and Compressive Stiffness of Corneal Stroma

2010 ◽  
Author(s):  
Hamed Hatami-Marbini ◽  
Peter M. Pinsky
Keyword(s):  
Extracellular Matrix ◽  
Articular Cartilage ◽  
Electrostatic Interactions ◽  
Corneal Stroma ◽  
Collagen Fibers ◽  
Connective Tissues ◽  
Compressive Stiffness ◽  
Electrostatic Contribution ◽  
Repulsive Forces

The extracellular matrix (ECM) is a fibrous structure embedded in an aqueous gel. The mechanical and electrostatic interactions of the ECM constituents, i.e. collagen fibers and proteoglycans (PGs), define the structure and mechanical response of connective tissues (CTs) such as cornea and articular cartilage. Proteoglycans are complex macromolecules consisting of linear chains of repeating gylcosaminoglycans (GAGs) which are covalently attached to a core protein. PGs can be as simple as decorin with a single GAG side chain or as complex as aggrecan with many GAGs. Decorin is the simplest small leucine-rich PG and is the main PG inside the corneal stroma. It has an arch shape and links non-covalently at its concave surface to the collagen fibrils. It has been shown that while collagen fibers inside the extracellular matrix resist the tensile forces, the negatively charged glycosaminoglycans and their interaction with water give compressive stiffness to the tissue. The role of PGs in biomechanical properties of the connective tissues has mainly been studied in order to explore the behavior of articular cartilage [1], which is a CT with large and highly negatively charged PGs, aggrecans. In order to explain the role of PGs in this tissue, it is commonly assumed that their contribution to the CT elasticity is because of both the repulsive forces between negatively charged GAGs and GAG interactions with free mobile charges in the ionic bath. The electrostatic contribution to the shear and compressive stiffness of cartilage is modeled by approximating GAGs as charged rods [1]. The Poisson-Boltzmann equation is used to compute the change in electrical potential and mobile ion distributions which are caused by the macroscopic deformation.

Material Properties of Porcine Corneal Stroma in Unconfined Compression

2013 ◽  
Author(s):  
Hamed Hatami-Marbini ◽  
Ebitimi Etebu
Keyword(s):  
Extracellular Matrix ◽  
Corneal Stroma ◽  
Swelling Pressure ◽  
Empty Space ◽  
Collagen Fibers ◽  
Necessary Condition ◽  
Internal Stresses ◽  
Connective Tissues ◽  
Polyelectrolyte Gel ◽  
Hexagonal Arrangement

The tensile properties of the cornea have been extensively studied while there are fewer studies on its compressive stiffness. The mechanical properties and structure of the cornea like many other connective tissues are derived from the function and properties of their extracellular matrix. The corneal extracellular matrix, stroma, is a polyelectrolyte gel composed of collagenous fibers embedded in an aqueous matrix. The cornea has two different functions: optical and mechanical. It is the main refractive component of the visual system and it is an effective barrier resisting the deformation caused by external and internal stresses. A necessary condition for corneal optical properties and transparency is the maintenance of a pseudo hexagonal arrangement of the collagen fibers inside the extracellular matrix. This regular arrangement is attributed to the interaction of collagen fibers with the proteoglycans. Under physiological conditions, the proteoglycans are ionized and form a hydrated gel in the empty space between the collagen fibrils by attracting the water and solutes. The interaction of the negatively fixed charges of the proteoglycans with themselves and with the free ions inside the interstitial fluid contributes to the corneal swelling pressure and subsequently to its compressive properties.

Polarity Determination in Sphalerite and Wurtzite Structures

1990 ◽  
Vol 48 (2) ◽  
pp. 500-501
Author(s):  
Stuart McKernan ◽  
C. Barry Carter
Keyword(s):  
Opposite Polarity ◽  
Single Domain ◽  
Polar Material ◽  
Electron Microscopic ◽  
Dynamical Interaction ◽  
X Ray ◽  
Polarity Determination ◽  
The Absolute ◽  
Microscopic Techniques

The determination of the absolute polarity of a polar material is often crucial to the understanding of the defects which occur in such materials. Several methods exist by which this determination may be performed. In bulk, single-domain specimens, macroscopic techniques may be used, such as the different etching behavior, using the appropriate etchant, of surfaces with opposite polarity. X-ray measurements under conditions where Friedel’s law (which means that the intensity of reflections from planes of opposite polarity are indistinguishable) breaks down can also be used to determine the absolute polarity of bulk, single-domain specimens. On the microscopic scale, and particularly where antiphase boundaries (APBs), which separate regions of opposite polarity exist, electron microscopic techniques must be employed. Two techniques are commonly practised; the first [1], involves the dynamical interaction of hoLz lines which interfere constructively or destructively with the zero order reflection, depending on the crystal polarity. The crystal polarity can therefore be directly deduced from the relative intensity of these interactions.

Techniques For The Preparation of Tissue Samples Containing Injectable Polymer Microcapsules

1985 ◽  
Vol 43 ◽  
pp. 710-711
Author(s):  
G.E. Visscher ◽  
R. L. Robison ◽  
G. J. Argentieri
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Gastrocnemius Muscle ◽  
Degradation Process ◽  
Delivery Systems ◽  
Tissue Reaction ◽  
Electron Microscopic ◽  
Tissue Samples ◽  
Injectable Polymer ◽  
Microscopic Techniques

The use of various bioerodable polymers as drug delivery systems has gained considerable interest in recent years. Among some of the shapes used as delivery systems are films, rods and microcapsules. The work presented here will deal with the techniques we have utilized for the analysis of the tissue reaction to and actual biodegradation of injectable microcapsules. This work has utilized light microscopic (LM), transmission (TEM) and scanning (SEM) electron microscopic techniques. The design of our studies has utilized methodology that would; 1. best characterize the actual degradation process without artifacts introduced by fixation procedures and 2. allow for reproducible results.In our studies, the gastrocnemius muscle of the rat was chosen as the injection site. Prior to the injection of microcapsules the skin above the sites was shaved and tattooed for later recognition and recovery. 1.0 cc syringes were loaded with the desired quantity of microcapsules and the vehicle (0.5% hydroxypropylmethycellulose) drawn up. The syringes were agitated to suspend the microcapsules in the injection vehicle.

Correlative transmission and high-resolution scanning electron microscopic studies on pituitary cells

1990 ◽  
Vol 48 (3) ◽  
pp. 20-21
Author(s):  
S. Tai
Keyword(s):  
Cell Types ◽  
Depth Of Field ◽  
Secretory Cells ◽  
Specific Cell ◽  
Pituitary Cells ◽  
Electron Microscopic ◽  
3 Dimensional ◽  
Microscopic Studies ◽  
Structure And Activity ◽  
Intracellular Structure

Extensive cytological and histological research, correlated with physiological experimental analysis, have been done on the anterior pituitaries of many different vertebrates which have provided the knowledge to create the concept that specific cell types synthesize, store and release their specific hormones. These hormones are stored in or associated with granules. Nevertheless, there are still many doubts - that need further studies, specially on the ultrastructure and physiology of these endocrine cells during the process of synthesis, transport and secretion, whereas some new methods may provide the information about the intracellular structure and activity in detail.In the present work, ultrastructural study of the hormone-secretory cells of chicken pituitaries have been done by using TEM as well as HR-SEM, to correlate the informations obtained from 2-dimensional TEM micrography with the 3-dimensional SEM topographic images, which have a continous surface with larger depth of field that - offers the adventage to interpretate some intracellular structures which were not possible to see using TEM.

Ultrastructural Immunocytochemistry of Five Rat Pituitary Adenomas

1980 ◽  
Vol 38 ◽  
pp. 724-725
Author(s):  
D. J. McComb ◽  
N. Ryan ◽  
E. Horvath ◽  
K. Kovacs ◽  
E. Nagy ◽  
...  
Keyword(s):  
Pituitary Adenomas ◽  
Pituitary Tumors ◽  
Electron Microscopic ◽  
Electron Microscopic Immunocytochemistry ◽  
Transmission Electron ◽  
Rat Pituitary ◽  
Radiation Induced ◽  
Group 5 ◽  
Group 2 ◽  
Microscopic Techniques

Conventional light and electron microscopic techniques failed to clarify the cellular composition and derivation of spontaneous and induced, intrasellar and transplanted pituitary adenomas in rats (1). In the present work, electron microscopic immunocytochemistry was applied to evaluate five adenohypo-physial tumors using a technique described by Moriarty and Garner (2). Spontaneously occurring pituitary adenomas (group 1) were harvested from aging female Long-Evans rats. R-Amsterdam rats were treated with 2 x 1.0 mg estrone acetate (HogivaI) s.c. weekly for 6 months. Pituitary adenomas in excess of 30 mg were removed from these animals to make up the tumors of group 2. Groups 3 and 4 consisted of estrogen-induced autonomous transplan¬ted pituitary tumors MtT.WlO and MtT.F4. Group 5 was a radiation-induced transplanted autonomous pituitary tumor MtT.W5. The tumors of groups 3,4 and 5 were allowed to proliferate in host rats 6-8 weeks prior to removal for processing. Tissue was processed for transmission electron microscopy (glutaraldehyde fixation, OsO4 postfixation and epoxy resin embedding), and electron microscopic immunocytochemistry (3% paraformaldehyde fixation and Araldite embedding).

Sign in / Sign up

Export Citation Format

Share Document