scholarly journals Experimental and Computational Investigations of Phase Change Thermal Energy Storage Canisters

2000 ◽  
Vol 122 (4) ◽  
pp. 176-182 ◽  
Author(s):  
Mounir Ibrahim ◽  
Pavel Sokolov ◽  
Thomas Kerslake ◽  
Carol Tolbert
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Radiation Heat Transfer ◽  
Convection Heat Transfer ◽  
Melting Time ◽  
Radiation Heat ◽  
Space Experiments

Two sets of experimental data for cylindrical canisters with thermal energy storage applications were examined in this paper: 1) Ground Experiments and 2) Space Experiments. A 2-D computational model was developed for unsteady heat transfer (conduction and radiation) with phase-change. The radiation heat transfer employed a finite volume method. The following was found in this study: 1) Ground Experiments, the convection heat transfer is equally important to that of the radiation heat transfer; Radiation heat transfer in the liquid is found to be more significant than that in the void; Including the radiation heat transfer in the liquid resulted in lower temperatures (about 15 K) and increased the melting time (about 10 min.); Generally, most of the heat flow takes place in the radial direction. 2) Space Experiments, Radiation heat transfer in the void is found to be more significant than that in the liquid (exactly the opposite to the Ground Experiments); Accordingly, the location and size of the void affects the performance considerably; Including the radiation heat transfer in the void resulted in lower temperatures (about 40 K). [S0199-6231(00)00304-X]

scholarly journals Effect of the Quasi-Petal Heat Transfer Tube on the Melting Process of the Nano-Enhanced Phase Change Substance in a Thermal Energy Storage Unit

2021 ◽  
Vol 13 (5) ◽  
pp. 2871
Author(s):  
Mohammad Ghalambaz ◽  
Seyed Abdollah Mansouri Mehryan ◽  
Reza Kalantar Feeoj ◽  
Ahmad Hajjar ◽  
Obai Younis ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Capric Acid ◽  
Melting Time ◽  
Storage Unit ◽  
Energy Storage Unit ◽  
Petal Shape

The melting heat transfer of nano-enhanced phase change materials was addressed in a thermal energy storage unit. A heated U-shape tube was placed in a cylindrical shell. The cross-section of the tube is a petal-shape, which can have different amplitudes and wave numbers. The shell is filled with capric acid with a fusion temperature of 32 °C. The copper (Cu)/graphene oxide (GO) type nanoparticles were added to capric acid to improve its heat transfer properties. The enthalpy-porosity approach was used to model the phase change heat transfer in the presence of natural convection heat transfer effects. A novel mesh adaptation method was used to track the phase change melting front and produce high-quality mesh at the phase change region. The impacts of the volume fraction of nanoparticles, the amplitude and number of petals, the distance between tubes, and the angle of tube placements were investigated on the thermal energy rate and melting-time in the thermal energy storage unit. An average charging power can be raised by up to 45% by using petal shape tubes compared to a plain tube. The nanoadditives could improve the heat transfer by 7% for Cu and 11% for GO nanoparticles compared to the pure phase change material.

Numerical Investigation on the Effect of Aluminum Foam in a Latent Thermal Energy Storage

2015 ◽  
Author(s):  
Bernardo Buonomo ◽  
Davide Ercole ◽  
Oronzio Manca ◽  
Hasan Celik ◽  
Moghtada Mobedi
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Numerical Investigation ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Metal Foam ◽  
Local Thermal Equilibrium ◽  
Melting Time ◽  
High Porosity

In this paper, a numerical investigation on Latent Heat Thermal Energy Storage System (LHTESS) based on a phase change material (PCM) is accomplished. The geometry of the system under investigation is a vertical shell and tube LHTES made with two concentric aluminum tubes. The internal surface of the hollow cylinder is assumed at a constant temperature above the melting temperature of the PCM to simulate the heat transfer from a hot fluid. The other external surfaces are assumed adiabatic. The phase change of the PCM is modeled with the enthalpy porosity theory while the metal foam is considered as a porous media that obeys to the Darcy-Forchheimer law. The momentum equations are modified by adding of suitable source term which it allows to model the solid phase of PCM and natural convection in the liquid phase of PCM. Both local thermal equilibrium (LTE) and local thermal non-equilibrium (LTNE) models are examined. Results as a function of time for the charging phase are carried out for different porosities and assigned pore per inch (PPI). The results show that at high porosity the LTE and LTNE models have the same melting time while at low porosity the LTNE has a larger melting time. Moreover, the presence of metal foam improves significantly the heat transfer in the LHTES giving a very faster phase change process with respect to pure PCM, reducing the melting time more than one order of magnitude.

Numerical Investigation on a Latent Thermal Energy Storage With Aluminum Foam

2016 ◽  
Author(s):  
Bernardo Buonomo ◽  
Davide Ercole ◽  
Oronzio Manca ◽  
Sergio Nardini
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Numerical Investigation ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Metal Foam ◽  
Local Thermal Equilibrium ◽  
Melting Time ◽  
High Porosity

In this paper, a numerical investigation on Latent Heat Thermal Energy Storage System (LHTESS) based on a phase change material (PCM) in a metal foam is accomplished. A vertical shell and tube LHTESS made with two concentric aluminum tubes is investigated. The internal surface of the hollow cylinder is at a constant temperature above the PCM melting temperature to simulate the heat transfer from a hot fluid. The other external surfaces are assumed adiabatic. The phase change of the PCM is modeled with the enthalpy porosity theory while the metal foam is considered as a porous media that obeys to the Darcy-Forchheimer law. Local thermal non-equilibrium (LTNE) model is assumed to analyze the metal foam and some comparison are accomplished with the local thermal equilibrium model assumption. The governing equations are solved employing the Ansys-Fluent 15 code. Numerical simulations for PCM, PCM in the porous medium in LTE and in LTNE assumptions are obtained. Results as a function of time for the charging phase are carried out for different porosities and assigned pore per inch (PPI). The results show that at high porosity the LTE and LTNE models have the same melting time while at low porosity the LTNE has a larger melting time. Moreover, the presence of metal foam improves significantly the heat transfer in the LHTESS giving a very faster phase change process with respect to pure PCM, reducing the melting time more than one order of magnitude.

Thermal Energy Storage Through Melting of a Commercial Phase Change Material in an Annulus with Radially Divergent Longitudinal Fins

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Tonny Tabassum Mainul Hasan ◽  
Latifa Begum
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage System ◽  
Operating Conditions ◽  
Melting Time ◽  
Bottom Part ◽  
Change Material

This study reports on the unsteady two-dimensional numerical investigations of melting of a paraffin wax (phase change material, PCM) which melts over a temperature range of 8.7oC. The PCM is placed inside a circular concentric horizontal-finned annulus for the storage of thermal energy. The inner tube is fitted with three radially diverging longitudinal fins strategically placed near the bottom part of the annulus to accelerate the melting process there. The developed CFD code used in Tabassum et al., 2018 is extended to incorporate the presence of fins. The numerical results show that the average Nusselt number over the inner tube surface, the total melt fraction, the total stored energy all increased at every time instant in the finned annulus compared to the annulus without fins. This is due to the fact that in the finned annulus, the fins at the lower part of the annulus promotes buoyancy-driven convection as opposed to the slow conduction melting that prevails at the bottom part of the plain annulus. Fins with two different heights have been considered. It is found that by extending the height of the fin to 50% of the annular gap about 33.05% more energy could be stored compared to the bare annulus at the melting time of 82.37 min for the identical operating conditions. The effects of fins with different heights on the temperature and streamfunction distributions are found to be different. The present study can provide some useful guidelines for achieving a better thermal energy storage system.

scholarly journals Latent Heat Phase Change Heat Transfer of a Nanoliquid with Nano–Encapsulated Phase Change Materials in a Wavy-Wall Enclosure with an Active Rotating Cylinder

2021 ◽  
Vol 13 (5) ◽  
pp. 2590
Author(s):  
S. A. M. Mehryan ◽  
Kaamran Raahemifar ◽  
Leila Sasani Gargari ◽  
Ahmad Hajjar ◽  
Mohamad El Kadri ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Wavy Wall ◽  
Governing Equations ◽  
Stefan Number ◽  
Change Material

A Nano-Encapsulated Phase-Change Material (NEPCM) suspension is made of nanoparticles containing a Phase Change Material in their core and dispersed in a fluid. These particles can contribute to thermal energy storage and heat transfer by their latent heat of phase change as moving with the host fluid. Thus, such novel nanoliquids are promising for applications in waste heat recovery and thermal energy storage systems. In the present research, the mixed convection of NEPCM suspensions was addressed in a wavy wall cavity containing a rotating solid cylinder. As the nanoparticles move with the liquid, they undergo a phase change and transfer the latent heat. The phase change of nanoparticles was considered as temperature-dependent heat capacity. The governing equations of mass, momentum, and energy conservation were presented as partial differential equations. Then, the governing equations were converted to a non-dimensional form to generalize the solution, and solved by the finite element method. The influence of control parameters such as volume concentration of nanoparticles, fusion temperature of nanoparticles, Stefan number, wall undulations number, and as well as the cylinder size, angular rotation, and thermal conductivities was addressed on the heat transfer in the enclosure. The wall undulation number induces a remarkable change in the Nusselt number. There are optimum fusion temperatures for nanoparticles, which could maximize the heat transfer rate. The increase of the latent heat of nanoparticles (a decline of Stefan number) boosts the heat transfer advantage of employing the phase change particles.

Improved Melting and Solidification in Thermal Energy Storage Through Topology Optimization of Highly Conductive Fins

2017 ◽  
Author(s):  
Alberto Pizzolato ◽  
Adriano Sciacovelli ◽  
Vittorio Verda
Keyword(s):  
Topology Optimization ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Optimization Method ◽  
Periodic Pattern ◽  
Melting Time ◽  
Bottom Part

Thermal energy storage units based on phase change materials (PCMs) need a fine design of highly conductive fins to improve the average heat transfer rate. In this paper, we seek the optimal distribution of a highly conductive material embedded in a PCM through a density-based topology optimization method. The phase change problem is solved through an enthalpy-porosity model, which accounts for natural convection in the fluid. Results show fundamental differences in the optimized layout between the solidification and the melting case. Fins optimized for solidification show a quasi-periodic pattern along the angular direction. On the other hand, fins optimized for melting elongate mostly in the bottom part of the unit leaving only two short baffles at the top. In both cases, the optimized structures show non-intuitive details which could not be obtained neglecting fluid flow. These additional features reduce the solidification and melting time by 11 % and 27 % respectively compared to a structure optimized for diffusion.

Solid/Liquid Phase Change Heat Transfer in Latent Heat Thermal Energy Storage

2009 ◽  
Author(s):  
D. Zhou ◽  
C. Y. Zhao
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Calcium Chloride ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Metal Foams ◽  
Chloride Hexahydrate

Phase change materials (PCMs) have been widely used for thermal energy storage systems due to their capability of storing and releasing large amounts of energy with a small volume and a moderate temperature variation. Most PCMs suffer the common problem of low thermal conductivity, being around 0.2 and 0.5 for paraffin and inorganic salts, respectively, which prolongs the charging and discharging period. In an attempt to improve the thermal conductivity of phase change materials, the graphite or metallic matrix is often embedded within PCMs to enhance the heat transfer. This paper presents an experimental study on heat transfer characteristics of PCMs embedded with open-celled metal foams. In this study both paraffin wax and calcium chloride hexahydrate are employed as the heat storage media. The transient heat transfer behavior is measured. Compared to the results of pure PCMs samples, the investigation shows that the additions of metal foams can double the overall heat transfer rate during the melting process. The results of calcium chloride hexahydrate are also compared with those of paraffin wax.

Sign in / Sign up

Export Citation Format

Share Document