Position Analysis in Analytical Form of the 3-PSP Mechanism

1999 ◽  
Vol 123 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Raffaele Di Gregorio ◽  
Vincenzo Parenti-Castelli
Keyword(s):  
Nonlinear Equations ◽  
Parallel Mechanism ◽  
Analytical Form ◽  
Rigid Bodies ◽  
The Other ◽  
Kinematic Chains ◽  
Position Analysis ◽  
Fixed Base ◽  
Inverse Position Analysis ◽  
Movable Platform

In this paper the direct and the inverse position analysis of a 3-dof fully-parallel mechanism, known as 3-PSP mechanism, is addressed and solved in analytical form. The 3-PSP mechanism consists of two rigid bodies, one movable (platform) and the other fixed (base), connected to each other by means of three equal serial kinematic chains (legs) of type PSP, P and S standing for prismatic and spherical pair respectively. Both the direct and the inverse position analysis of this mechanism lead to nonlinear equations that are difficult to solve. In particular, the inverse position analysis comprises different subproblems which need specific solution techniques. Finally a numerical example is reported.

Position Analysis in Analytical Form of the 3-PSP Mechanism

1999 ◽  
Author(s):  
Raffaele Di Gregorio ◽  
Vincenzo Parenti-Castelli
Keyword(s):  
Parallel Mechanism ◽  
Linear Equations ◽  
Analytical Form ◽  
Rigid Bodies ◽  
Kinematic Chains ◽  
Position Analysis ◽  
Fixed Base ◽  
Inverse Position Analysis ◽  
Movable Platform ◽  
Non Linear Equations

Abstract In this paper the direct and the inverse position analysis of a 3-dof fully-parallel mechanism, known as 3-PSP mechanism, is addressed and solved in analytical form. The 3-PSP mechanism consists of two rigid bodies, one movable (platform) and the other fixed (base), connected to each other by means of three equal serial kinematic chains (legs) of type PSP, P and S standing for prismatic and spherical pair respectively. Both the direct and the inverse position analysis of this mechanism lead to non-linear equations that are difficult to solve. In particular, the inverse position analysis comprises different sub-problems which need specific solution techniques. Finally a numerical example is reported.

Analytic Form Solution of the Direct Position Analysis of a Wide Family of Three-Legged Parallel Manipulators

2005 ◽  
Vol 128 (1) ◽  
pp. 264-271 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Analytic Form ◽  
Parallel Manipulators ◽  
Analytical Form ◽  
Form Solution ◽  
Kinematic Chains ◽  
Position Analysis ◽  
In Series ◽  
The One ◽  
Generic Structures ◽  
Wide Family

A wide family of parallel manipulators (PMs) is the one that groups all PMs with three legs where the legs become kinematic chains constituted of a passive spherical pair (S) in series with either a passive prismatic pair (P) or a passive revolute pair (R) when the actuators are locked. The topologies of the structures generated by these manipulators, when the actuators are locked, are ten. Two out of these topologies are the SR-2PS topology (one SR leg and two PS legs) and the SP-2RS topology (one SP leg and two RS legs). This paper presents two algorithms. The first one determines all the assembly modes of the SR-2PS structures. The second one determines all the assembly modes of the SP-2RS structures. The presented algorithms can be applied without changes to solve, in analytical form, the direct position analysis (DPA) of all the parallel manipulators that generate a SR-2PS structure or a SP-2RS structure when the actuators are locked. In particular, the closure equations of two generic structures, one of type SR-2PS and the other of type SP-2RS, are written. The eliminants of the two systems of equations are determined and the solution procedures are presented. Finally, the proposed procedures are applied to real cases. This work demonstrates that (i) the DPA solutions of any PM that becomes a SR-2PS structure are at most eight, and (ii) the DPA solutions of any PM that becomes a SP-2RS structure are at most sixteen.

Direct Position Analysis in Analytical Form of Parallel Manipulators Generating Structures With Topology SR-2PS

2004 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Analytical Form ◽  
Solution Procedure ◽  
Generic Structure ◽  
Kinematic Chains ◽  
Position Analysis ◽  
In Series ◽  
The One ◽  
Wide Family

A wide family of parallel manipulators (PMs) is the one that groups all the PMs with three legs where the legs become kinematic chains constituted of a passive spherical pair (S) in series with either a passive prismatic pair (P) or a passive revolute pair (R) when the actuators are locked. The topologies of the structures generated by these manipulators, when the actuators are locked, are ten. One out of these topologies is the SR-2PS topology (one SR leg and two PS legs). This paper presents an algorithm that determines all the assembly modes of the structures with topology SR-2PS in analytical form. The presented algorithm can be applied without changes to solve, in analytical form, the direct position analysis of any parallel manipulator which generates a SR-2PS structure when the actuators are locked. In particular, the closure equations of a generic structure with topology SR-2PS are written. The eliminant of this system of equations is determined and the solution procedure is presented. Finally, the proposed procedure is applied to a real case. This work demonstrates that the solutions of the direct position analysis of any parallel manipulator which generates a SR-2PS structure when the actuators are locked are at most eight.

scholarly journals Polynomial Solution to the Position Analysis of Two Assur Kinematic Chains With Four Loops and the Same Topology

2009 ◽  
Vol 1 (2) ◽  
Author(s):  
Júlia Borràs ◽  
Raffaele Di Gregorio
Keyword(s):  
Polynomial Solution ◽  
Large Family ◽  
The Other ◽  
End Effector ◽  
Closed Loops ◽  
Kinematic Chains ◽  
Position Analysis ◽  
One To One ◽  
Actuated Joints

The direct position analysis (DPA) of a manipulator is the computation of the end-effector poses (positions and orientations) compatible with assigned values of the actuated-joint variables. Assigning the actuated-joint variables corresponds to considering the actuated joints locked, which makes the manipulator a structure. The solutions of the DPA of a manipulator one to one correspond to the assembly modes of the structure that is generated by locking the actuated-joint variables of that manipulator. Determining the assembly modes of a structure means solving the DPA of a large family of manipulators since the same structure can be generated from different manipulators. This paper provides an algorithm that determines all the assembly modes of two structures with the same topology that are generated from two families of mechanisms: one planar and the other spherical. The topology of these structures is constituted of nine links (one quaternary link, four ternary links, and four binary links) connected through 12 revolute pairs to form four closed loops.

DIRECT KINEMATIC ANALYSIS OF A FAMILY OF 4-DOF PARALLEL MANIPULATORS WITH A PASSIVE CONSTRAINING LEG

2011 ◽  
Vol 35 (3) ◽  
pp. 437-459 ◽  
Author(s):  
Soheil Zarkandi ◽  
Hamid R. Mohammadi Daniali
Keyword(s):  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Numerical Example ◽  
Fixed Base ◽  
Univariate Polynomials ◽  
Movable Platform ◽  
Univariate Polynomial ◽  
Kinematic Singularities

This paper presents direct kinematic analysis of a family of 3R1T parallel manipulators, while R and T denote the rotational and translational degrees of freedom respectively. The manipulators consist of two rigid bodies, a movable platform and a fixed (base) connected to each other by four active legs and one constraining passive leg. First, the direct position kinematics of the manipulators is analyzed. For a general manipulator of this class, this analysis results in a univariate polynomial of degree 30 along with a set of other univariate polynomials of degree 16 and 4 respectively. However, for a special architecture of the manipulators, it is shown that the direct position kinematics leads to a minimal univariate polynomial of degree 12. A numerical example is also included to confirm the results. Moreover, direct velocity and direct kinematic singularities of the manipulators are analyzed using Jacobian matrices.

Direct Position Analysis of a Reconfigurable 4-DOF Parallel Mechanism

2012 ◽  
Vol 562-564 ◽  
pp. 1168-1171
Author(s):  
Er Jiang Zhang ◽  
Yong Gang Li
Keyword(s):  
Parallel Mechanism ◽  
Structural Features ◽  
Graphical Representations ◽  
Elimination Method ◽  
Numerical Examples ◽  
The Real ◽  
Real Solutions ◽  
Position Analysis ◽  
Movable Platform ◽  
Absolute Coordinates

This article presents a direct position analysis of a reconfigurable 2PRS-2PUS parallel mechanism. Based on the structural features of this new mechanism, take the absolute coordinates of the four balls vice center on movable platform as the output variables, a direct position analysis which using elimination method is presented. The solution is verified by a group of numerical examples, which given by matlab. In addition, graphical representations of the real solutions are presented.

scholarly journals Design of Self-Reconfigurable Multiarm Robot Mechanism Based on Deployable Kinematic Chains

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Fu-Qun Zhao ◽  
Sheng Guo ◽  
Hai-Jun Su ◽  
Hai-Bo Qu ◽  
Ya-Qiong Chen
Keyword(s):  
Parallel Mechanism ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Assembly Method ◽  
Operation Modes ◽  
Object Based ◽  
Switch Operation ◽  
Storage Area ◽  
Mechanism Theory

Abstract As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addressing this issue, this paper presents a type of multiarm robot that can be adequately folded into a designed area. The robot can achieve different operation modes by combining different arms and objects. First, deployable kinematic chains (DKCs) are designed, which can be folded into a designated area and be used as an arm structure in the multiarm robot mechanism. The strategy of a platform for storing DKCs is proposed. Based on the restrictions in the storage area and the characteristics of parallel mechanisms, a class of DKCs, called base assembly library, is obtained. Subsequently, an assembly method for the synthesis of the multiarm robot mechanism is proposed, which can be formed by the connection of a multiarm robot mechanism with an operation object based on a parallel mechanism structure. The formed parallel mechanism can achieve a reconfigurable characteristic when different DKCs connect to the operation object. Using this method, two types of multiarm robot mechanisms with four DKCs that can switch operation modes to perform different tasks through autonomous combination and release operation is proposed. The obtained mechanisms have observable advantages when compared with the traditional mechanisms, including optimizing the occupied volume during transportation and using parallel mechanism theory to analyze the switching of operation modes.

KINEMATICS AND WORKSPACE ANALYSIS OF A 3 DEGREE OF FREEDOM PARALLEL MECHANISM WITH PARALLELOGRAM LINKAGE

2017 ◽  
Vol 41 (5) ◽  
pp. 922-935
Author(s):  
HongJun San ◽  
JunSong Lei ◽  
JiuPeng Chen ◽  
ZhengMing Xiao ◽  
JunJie Zhao
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Analytical Method ◽  
Theoretical Basis ◽  
Parallel Mechanism ◽  
Graphical Method ◽  
Degree Of Freedom ◽  
Workspace Analysis ◽  
Fixed Base ◽  
Moving Platform

In this paper, a 3-DOF translational parallel mechanism with parallelogram linkage was studied. According to the space vector relation between the moving platform and the fixed base, the direct and inverse position solutions of this mechanism was deduced through analytical method. In addition, the error of the algorithm was analyzed, and the algorithm had turned out to be effective and to have the satisfactory computational precision. On the above basis, the workspace of this mechanism was found through graphical method, which was compared with that of finding through Monte Carlo method, and there was the feasibility for analyzing the workspace of the mechanism by graphical method. The characteristic of the mechanism was analyzed by comparing the results of two analysis methods, which provided a theoretical basis for the application of the mechanism.

The Parallel Mechanism and Variable Acceleration Control Method

2013 ◽  
Vol 579-580 ◽  
pp. 659-664
Author(s):  
Xiang Bo Ouyang ◽  
Ke Tian Li ◽  
Hong Jian Xia ◽  
Su Juan Wang ◽  
Huan Wei Zhou ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Control Method ◽  
The Other ◽  
Connecting Rod ◽  
Motion Platform ◽  
The Third ◽  
Symmetric Structure ◽  
Slide Block ◽  
Operation Process ◽  
Moving Platform

t presents the parallel mechanism and variable acceleration control method, which is composed of slider, connecting rod, moving platform and linear guide etc. The motion platform is supported by three connecting rods through hinging, the other end of the connecting rods are respectively hinged with two sliders. Among them two pairs of connecting rod, two sliders and the moving platform formed a symmetric structure that is the so called Parallel Mechanism. The third connecting rod is parallel to one of two connecting rods, so that the two parallel connecting rods, slide block and the moving platform formed a parallelogram structure, it makes that the moving platform is always parallel to liner guiderail in the process of movement. By controlling the two sliders moving in the way of variable acceleration, it can make the trajectory curve, speed curve and acceleration curve of the moving platform are continuous, smooth, so impact and vibration of the moving platform is limited in the operation process.

Drive System Sizing of a 6-DOF Parallel Robotic Platform

2014 ◽  
Author(s):  
Hermes Giberti ◽  
Davide Ferrari
Keyword(s):  
Optimal Solution ◽  
Parallel Robot ◽  
Drive System ◽  
Pareto Optimal ◽  
Hardware In The Loop ◽  
Motion Simulation ◽  
Inverse Dynamic ◽  
Kinematic Chains ◽  
Fixed Base ◽  
Parallel Kinematic

In this work, it is considered a 6-DoF robotic device intended to be applied for hardware-in-the-loop (HIL) motion simulation with wind tunnel models. The requirements have led to a 6-PUS parallel robot whose linkages consist of six closed-loop kinematic chains, connecting the fixed base to the mobile platform with the same sequence of joints: actuated Prism (P), Universal (U), and Spherical (S). As is common for parallel kinematic manipulators (PKMs), the actual performances of the robot depend greatly on its dimensions. Therefore, a kinematic synthesis has been performed and several Pareto-optimal solutions have been obtained through a multi-objective optimization of the machine geometric parameters, using a genetic algorithm. In this paper, the inverse dynamic analysis of the robot is presented. Then, the results are used for the mechanical sizing of the drive system, comparing belt- to screw-driven units and selecting the motor-reducer groups. Finally, the best compromise Pareto-optimal solution is definitely chosen.

Sign in / Sign up

Export Citation Format

Share Document