Influence of Inlet Conditions on the Thermohydrodynamic State of a Fully Circumferentially Grooved Journal Bearing

2000 ◽  
Vol 123 (3) ◽  
pp. 525-532 ◽  
Author(s):  
P. S. Keogh ◽  
M. M. Khonsari
Keyword(s):  
Temperature Distribution ◽  
Energy Equation ◽  
Journal Bearing ◽  
Hydrodynamic Bearing ◽  
Simplified Approach ◽  
Supply Pressure ◽  
Axial Temperature ◽  
Viscosity Variation ◽  
Inlet Conditions

A thermohydrodynamic (THD) analysis of a fully circumferentially grooved hydrodynamic bearing is presented. The pressure distribution is obtained using the short bearing approximation taking into account the viscosity variation in the radial and circumferential coordinates. The axial temperature variation is also included by an axial averaging technique, which incorporates the supply pressure and film entry temperature in the energy equation. It is found that the determination of the lubricant temperature at the entry to the film plays an important role in the overall temperature distribution in the bearing. A simplified approach for determining this temperature is presented. An extensive set of experimental results performed by Maki and Ezzat (1980, ASME J. Lubr. Technol., 102, pp. 8–14) is used for validation purposes. The results show that mixing in the inlet groove may cause the film entry temperature to be significantly different from the nominal supply temperature and hence have a significant influence on the bearing temperature.

scholarly journals An Analytical Method for the Determination of Temperature Distribution in Short Journal Bearing Oil Film

Symmetry ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 539
Author(s):  
Nebojsa Nikolic ◽  
Zivota Antonic ◽  
Jovan Doric ◽  
Dragan Ruzic ◽  
Stjepan Galambos ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Oil Film ◽  
Symmetric Geometry ◽  
Experimental Values ◽  
Operating Regimes ◽  
Level Of Agreement

The aim of this paper is to derive an equation for the temperature distribution in journal bearing oil film, in order to predict the thermal load of a bearing. This is very important for the prevention of critical regimes in a bearing operation. To achieve the goal, a partial differential equation of the temperature field was first derived, starting from the energy equation coupled with the Reynolds equation of hydrodynamic lubrication for a short bearing of symmetric geometry. Then, by solving the equation analytically, the function of temperature distribution in the bearing oil film has been obtained. The solution is applied to the journal bearing, for which the experimental data are available in the references. Finally, the obtained results have been compared to the corresponding experimental values for two operating regimes, and a good level of agreement was achieved.

Analysis of a Finite Grooved Misaligned Journal Bearing Considering Cavitation and Starvation Effects

1990 ◽  
Vol 112 (1) ◽  
pp. 60-67 ◽  
Author(s):  
D. Vijayaraghavan ◽  
T. G. Keith
Keyword(s):  
Journal Bearing ◽  
Numerical Procedure ◽  
Diameter Ratio ◽  
Film Rupture ◽  
Supply Pressure ◽  
Starvation Effects ◽  
Inlet Conditions ◽  
Journal Misalignment ◽  
Length To Diameter Ratio

The effect of journal misalignment on the predicted performance of a finite grooved journal bearing is analyzed in this paper. The numerical procedure used incorporates a cavitation algorithm, which automatically predicts film rupture and reformation in the bearings. The misalignment considered varies in magnitude and direction with reference to the boundaries of the bearing. In addition to the misalignment, the effect of lubricant starvation at the groove is also considered and compared with flooded inlet conditions. The effects of various degrees of starvation, or higher lubricant supply pressure, bearing length to diameter ratio and groove size are also investigated.

A Comparative Thermal Analysis of Slot-Entry and Hole-Entry Hybrid Journal Bearings Lubricated With Non-Newtonian Lubricant

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
H. C. Garg ◽  
Vijay Kumar ◽  
H. B. Sharda
Keyword(s):  
Reynolds Equation ◽  
Energy Equation ◽  
Journal Bearing ◽  
Flow Equation ◽  
Journal Bearings ◽  
Constant Flow ◽  
Viscosity Variation ◽  
Bearing System ◽  
Flow Valve ◽  
Newtonian Behavior

The effect of viscosity variation due to temperature rise and non-Newtonian behavior of the lubricant on the performance of hole-entry and slot-entry hybrid journal bearings system is the focus of this investigation. The performance characteristics of nonrecessed hybrid journal bearings operating with different flow controlling devices, i.e., constant flow valve, capillary, orifice, and slot restrictors, have been compared. Finite element method has been used to solve the Reynolds equation governing the flow of lubricant in the bearing clearance space along with the restrictor flow equation, energy equation and conduction equation using suitable iterative technique. The non-Newtonian lubricant has been assumed to follow the cubic shear stress law. The results indicate that variation in viscosity due to rise in temperature and non-Newtonian behavior of the lubricant affects the performance of nonrecessed hybrid journal bearing system quite significantly. The results further indicate that bearing performance can be improved by selecting a particular bearing configuration in conjunction with a suitable compensating device.

scholarly journals Revisiting cosmic microwave background radiation using blackbody radiation inversion

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Koustav Konar ◽  
Kingshuk Bose ◽  
R. K. Paul
Keyword(s):  
Temperature Distribution ◽  
Cosmic Microwave Background ◽  
Background Radiation ◽  
Big Bang ◽  
Blackbody Radiation ◽  
Microwave Background ◽  
Background Spectrum ◽  
Microwave Background Radiation ◽  
Mathematical Process

AbstractBlackbody radiation inversion is a mathematical process for the determination of probability distribution of temperature from measured radiated power spectrum. In this paper a simple and stable blackbody radiation inversion is achieved by using an analytical function with three determinable parameters for temperature distribution. This inversion technique is used to invert the blackbody radiation field of the cosmic microwave background, the remnant radiation of the hot big bang, to infer the temperature distribution of the generating medium. The salient features of this distribution are investigated and analysis of this distribution predicts the presence of distortion in the cosmic microwave background spectrum.

scholarly journals Stator Non-Uniform Radial Ventilation Design Methodology for a 15 MW Turbo-Synchronous Generator Based on Single Ventilation Duct Subsystem

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2760
Author(s):  
Ruiye Li ◽  
Peng Cheng ◽  
Hai Lan ◽  
Weili Li ◽  
David Gerada ◽  
...  
Keyword(s):  
Finite Element ◽  
Temperature Distribution ◽  
Design Methodology ◽  
Large Scale ◽  
Synchronous Generator ◽  
Axial Direction ◽  
Scale Model ◽  
Element Analysis ◽  
Axial Temperature ◽  
Ventilation Duct

Within large turboalternators, the excessive local temperatures and spatially distributed temperature differences can accelerate the deterioration of electrical insulation as well as lead to deformation of components, which may cause major machine malfunctions. In order to homogenise the stator axial temperature distribution whilst reducing the maximum stator temperature, this paper presents a novel non-uniform radial ventilation ducts design methodology. To reduce the huge computational costs resulting from the large-scale model, the stator is decomposed into several single ventilation duct subsystems (SVDSs) along the axial direction, with each SVDS connected in series with the medium of the air gap flow rate. The calculation of electromagnetic and thermal performances within SVDS are completed by finite element method (FEM) and computational fluid dynamics (CFD), respectively. To improve the optimization efficiency, the radial basis function neural network (RBFNN) model is employed to approximate the finite element analysis, while the novel isometric sampling method (ISM) is designed to trade off the cost and accuracy of the process. It is found that the proposed methodology can provide optimal design schemes of SVDS with uniform axial temperature distribution, and the needed computation cost is markedly reduced. Finally, results based on a 15 MW turboalternator show that the peak temperature can be reduced by 7.3 ∘C (6.4%). The proposed methodology can be applied for the design and optimisation of electromagnetic-thermal coupling of other electrical machines with long axial dimensions.

Machine learning-based performance analysis of two-axial-groove hydrodynamic journal bearings

2021 ◽  
pp. 135065012199289
Author(s):  
Biswajit Roy ◽  
Sudip Dey
Keyword(s):  
Journal Bearing ◽  
Journal Bearings ◽  
Hydrodynamic Performance ◽  
Support Vector ◽  
Oil Viscosity ◽  
Hydrodynamic Analysis ◽  
Supply Pressure ◽  
Input Parameters ◽  
Precise Prediction ◽  
Output Behavior

The precise prediction of a rotor against instability is needed for avoiding the degradation or failure of the system’s performance due to the parametric variabilities of a bearing system. In general, the design of the journal bearing is framed based on the deterministic theoretical analysis. To map the precise prediction of hydrodynamic performance, it is needed to include the uncertain effect of input parameters on the output behavior of the journal bearing. This paper presents the uncertain hydrodynamic analysis of a two-axial-groove journal bearing including randomness in bearing oil viscosity and supply pressure. To simulate the uncertainty in the input parameters, the Monte Carlo simulation is carried out. A support vector machine is employed as a metamodel to increase the computational efficiency. Both individual and compound effects of uncertainties in the input parameters are studied to quantify their effect on the steady-state and dynamic characteristics of the bearing.

scholarly journals Influence of CFRC Insulating Plates on Spark Plasma Sintering Process

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 393
Author(s):  
Alexander M. Laptev ◽  
Jürgen Hennicke ◽  
Robert Ihl
Keyword(s):  
Temperature Distribution ◽  
Spark Plasma Sintering ◽  
Energy Demand ◽  
Composite Powders ◽  
Fem Method ◽  
Plasma Sintering ◽  
Axial Temperature ◽  
Spark Plasma ◽  
Power And Energy ◽  
The Impact

Spark Plasma Sintering (SPS) is a technology used for fast consolidation of metallic, ceramic, and composite powders. The upscaling of this technology requires a reduction in energy consumption and homogenization of temperature in compacts. The application of Carbon Fiber-Reinforced Carbon (CFRC) insulating plates between the sintering setup and the electrodes is frequently considered as a measure to attain these goals. However, the efficiency of such a practice remains largely unexplored so far. In the present paper, the impact of CFRC plates on required power, total sintering energy, and temperature distribution was investigated by experiments and by Finite Element Modeling (FEM). The study was performed at a temperature of 1000 °C with a graphite dummy mimicking an SPS setup. A rather moderate influence of CFRC plates on power and energy demand was found. Furthermore, the cooling stage becomes considerably longer. However, the application of CFRC plates leads to a significant reduction in the axial temperature gradient. The comparative analysis of experimental and modeling results showed the good capability of the FEM method for prediction of temperature distribution and required electric current. However, a discrepancy between measured and calculated voltage and power was found. This issue must be further investigated, considering the influence of AC harmonics in the DC field.

Sign in / Sign up

Export Citation Format

Share Document