Impact of Flow Boiling Instabilities on Heat Transfer Coefficient and Critical Heat Flux in a Microchannel

2021 ◽  
Author(s):  
Matthew Clark ◽  
Justin Weibel ◽  
Suresh Garimella
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Critical Heat Flux ◽  
Flow Boiling

The Effect of Inlet Orifice on Critical Heat Flux and Flow Boiling Heat Transfer in Single Horizontal Microtube

2013 ◽  
Author(s):  
Yanfeng Fan ◽  
Ibrahim Hassan
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Critical Heat Flux ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Saturation Pressure ◽  
Working Fluid ◽  
Flow Boiling Heat Transfer

Flow oscillation is a crucial issue for the development of flow boiling heat transfer in the applications. Inlet orifice has been proven be an option to eliminate the oscillation. However, the effects of inlet orifice on critical heat flux and flow boiling heat transfer coefficient are lack of study. In this work, the effects of inlet restriction on critical heat flux and heat transfer coefficient in single horizontal microtube under uniform heating condition is experimentally investigated using FC-72 as working fluid. A stainless steel microtube with an inner diameter of 889 μm is selected as main microtube. Two smaller microtubes are assembled at the inlet of main microtube to achieve the restriction configurations of 50% and 20% area ratios. The experimental measurement is carried out at mass fluxes ranging from 160–870 kg/m2·s and heat fluxes varying from 6–170 kW/m2. Two saturation pressures, 10 and 45 kPa, are tested. The experimental results of critical heat flux and two phase heat transfer coefficient obtained in the microtube without orifice are compared with the existing correlations. The addition of an orifice does not enhance the normal critical heat flux but increases the premature critical heat flux. In aspect of heat transfer, the orifice shows improvement on heat transfer coefficient at low mass flux and high saturation pressure.

Enhancing Flow Boiling Heat Transfer in Microchannels Using Monolithically-Coated Silicon Nanowires

2011 ◽  
Author(s):  
Dan Li ◽  
Gensheng Wu ◽  
Wei Wang ◽  
Yunda Wang ◽  
Ronggui Yang
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Critical Heat Flux ◽  
Silicon Nanowires ◽  
Flow Instability ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Variable Cross

Flow boiling in microchannels has been attractive for cooling of high power electronics. However, the flow instability hinders the heat transfer performance such as the premature initiation of the critical heat flux (CHF) and could result in device burnout. Numerous methods have been implemented to suppress the instability of flow boiling, including integrating micro pin fins in the channels [1] and inlet restrictors [2], as well as fabricating microchannels with variable cross-sectional areas [3]. Recently, Li et al [4] and Chen et al [5] explored the pool boiling enhancement using nanowires, which shows much more uniform bubble generation and a higher heat transfer coefficient and critical heat flux compared to plain surfaces. The work presented here is the very first effort to explor the impacts of nanowire coating on the flow boiling performance in parallel microchannels. We present here a monolithic integration process to fabricate silicon micro-channels coated with silicon nanowires and the flow boiling characterization of the microchannels. By comparing the flow boiling curves in the microchannels with and without nanowire coating, we show significant performance enhancement for a nanowire-coated microchannel, such as earlier ONB (onset of nucleate boiling), delayed OFO (onset of flow oscillation), enhanced HTC (heat transfer coefficient) and suppressed flow instability.

Sign in / Sign up

Export Citation Format

Share Document