Analysis of Open-Source Computational Fluids Dynamics Tool for Simulating Complex Hydrodynamic Problems

2021 ◽  
Author(s):  
Mohd Atif Siddiqui ◽  
HUILI XU ◽  
Marilena Greco ◽  
Giuseppina Colicchio
Keyword(s):  
Open Source ◽  
Computational Fluids Dynamics ◽  
Computational Fluids

Finite Element Model to Predict the Bioconversion Rate of Glucose to Fructose using Escherichia coli K12 for Sugar Production from Date

2015 ◽  
Vol 11 (1) ◽  
pp. 105-113 ◽  
Author(s):  
Maher Trigui ◽  
Karim Gabsi ◽  
Walid Zneti ◽  
Suzelle Barrington ◽  
Ahmed Noureddine Helal
Keyword(s):  
Escherichia Coli ◽  
Induction Time ◽  
Volume Fraction ◽  
Element Model ◽  
Initial Concentration ◽  
Computational Fluids Dynamics ◽  
Date Syrup ◽  
Computational Fluids ◽  
Two Phases ◽  
Inoculum Volume

Abstract In this study, Bioconversion process of glucose to fructose from date syrup using Escherichia coli K12 is modeled using a commercial computational fluids dynamics (CFD) code fluent FLUENT 6.3.23 [8] which we implemented a user-defined functions (UDF) to simulate the interrelationships at play between various phases. A two phases CFD model was developed using an Eulerian – Eulerian approach to calculate the fructose volume fraction produced during time. The bioconversion process was studied as function of three initial concentration of glucose (0.14, 0.242 and 0.463gL–1), three induction time (60, 120 and 180 mn) and three inoculum volume (100, 120 and 150mL). The numerical results are compared with experimental data for bioconversion rate and show good agreement (R2= 0.894). The optimal condition of diffusion was obtained by applying an initial concentration of glucose less than 0.2gL–1 and induction time great than 100 minutes.

Design and Testing of Innovative Rotational Mould Heated by Thermal Fluid

2010 ◽  
Author(s):  
M. D. Monzo´n ◽  
A. N. Beni´tez ◽  
P. Bordo´n ◽  
P. M. Herna´ndez ◽  
M. D. Marrero ◽  
...  
Keyword(s):  
Cycle Time ◽  
Energetic Efficiency ◽  
Internal Stresses ◽  
Cycle Times ◽  
Transfer Processes ◽  
Computational Fluids Dynamics ◽  
Heating And Cooling ◽  
Computational Fluids ◽  
Plastic Parts ◽  
Design And Testing

Rotomoulded plastic parts have no internal stresses, as it is a process carried out at lower temperatures than injection moulding and no pressure is applied. The main disadvantage is the high cycle times needed. This paper focuses on reducing this cycle time and in producing a mould using standardized parts. For cycle time reducing, it is proposed to heat the mould by thermal fluid in continuous circulation; heat transfer processes have been studied for over 20 different configurations of the oil’s inlet – outlet, obtaining acceptable results with a manifold with 25 perforations in the front and rear faces. This configuration has been optimized by computational fluids dynamics, allowing reducing heating and cooling time and improving the energetic efficiency and the uniformity of heating. Design, simulations and testing of a 100 mm3 cube have been carried out in order to produce a standardized mould; this mould consists in some standardized parts and a nickel shell, obtained by rapid prototyping and electroforming process. This shell can be removed from the rest of elements in the mould, allowing thus to obtain parts with any other geometry just by changing the nickel shell. An experimental machine for testing has been developed as well.

scholarly journals SIMULASI DISTRIBUSI TEMPERATUR DAN KELEMBABAN RELATIF RUANGAN DARI SISTEM DEHUMIDIFIKASI MENGGUNAKAN COMPUTATIONAL FLUIDS DYNAMICS (CFD)

ROTASI ◽  
2017 ◽  
Vol 19 (1) ◽  
pp. 1
Author(s):  
Eflita Yohana ◽  
Bambang Yunianto ◽  
Ade Eva Diana
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Simulation ◽  
Liquid Desiccant ◽  
Humidity Ratio ◽  
Computational Fluids Dynamics ◽  
Computational Fluids ◽  
Computational Fluid Dynamics Cfd

Dehumidifikasi merupakan proses pengurangan kadar uap air  yang berpengaruh terhadap besar nilai kelembaban relatif dan temperatur suatu ruangan. Dalam mengkondisikan kadar uap air dalam suatu ruangan tersebut agar dapat sesuai dengan kebutuhan, maka perlu diketahui distribusi kelembaban relatif dan temperatur dalam ruangan menggunakan Computational Fluid Dynamics (CFD). Pada penelitian ini, pengambilan data dilakukan selama 20 menit dan dilakukan pada pukul 08.00 WIB.  Liquid desiccant yang digunakan dijaga pada temperatur 10°C dengan variasi konsentrasi 40% dan 50%. Sensor DHT 11 dipasang pada lima sisi, atap, dinding, lantai, inlet, outlet, yang berfungsi untuk mencatat perubahan kelembaban dan temperatur selama pengujian berlangsung. Pada kondisi normal tanpa menyalakan alat dehumidifier, sensor mencatat temperatur rata-rata di dalam ruangan sebesar 29,9°C dan RH 58,9%. Simulasi dilakukan menggunakan software CFD Solidworks Flow Simulation 2014. Validasi hasil eksperimen dengan hasil simulasi dengan membandingan bahwa liquid desiccant 40% dan 50%, nozzle sprayer 0.2 mm dengan temperatur yang dijaga pada 10°C mempunyai distribusi yang cukup merata dengan konsentrasi 40% memiliki nilai RH terendah sebesar 65,21%, nilai RH tertinggi sebesar 68,99%, nilai ω = 18 gr/kg, serta mempunyai temperatur tertinggi 31,11°C dan temperatur terendah 30,05°C. Sedangkan dengan konsentrasi 50% distribusi dalam ruangan juga cukup merata karena memiliki nilai RH terendah sebesar 59,21%., nilai RH tertinggi sebesar 62,80%, nilai ω = 17 gr/kg, serta mempunyai temperatur tertinggi 31,71°C dan temperatur terendah 30,93°C. Sehingga liquid desiccant dengan konsentrasi 50% mempunyai nilai Humidity Ratio (ω) lebih rendah dibandingkan dengan yang memiliki konsentrasi 40%.

Study of the Gas Combustion LP in an Atmospheric Burner

2008 ◽  
Author(s):  
Armando Gallegos-Mun˜oz ◽  
Armando Balderas-Bernal ◽  
Alejandro Rami´rez-Barro´n ◽  
J. C. Prince-Avelino
Keyword(s):  
Fluid Dynamic ◽  
Premixed Combustion ◽  
Experimental Results ◽  
Experimental Measurements ◽  
Finite Rate ◽  
Gas Combustion ◽  
Finite Speed ◽  
Computational Fluids Dynamics ◽  
Computational Fluids ◽  
Laminar Flamelet

The study of the gas combustion LP in an atmospheric burner to bake ceramics is presented. The study includes different models from combustion and turbulence to find the best interaction chemistry-turbulence, applying Computational Fluids Dynamics (CFD) through FLUENT®. For the study different models of combustion were considered, where the finite speed of the reaction is important by means of kinetic chemistry from Arrhenius. The different models of combustion were; a generalized model of speed of Finite Rate/Eddy dissipation, non-premixed combustion Laminar Flamelet and Eddy dissipation. Each one of these models represents the combustion non-premixed of gas LP, to simulate the combustion of turbulent diffusive flames. For the study of the turbulence the model k-epsilon was applied. The results obtained for each combination turbulence-chemistry were compared with experimental measurements of temperature within the furnace. This comparison allowed making adjustments in the modeling of the process of combustion, identifying the best interaction between combustion and turbulence. According to the obtained results, the k-epsilon model represents adequately the fluid-dynamic development of the flame within the furnace. The models of combustion Finite Rate/Eddy dissipation and Laminar Flamelet show the best approach to the experimental results, where the k-epsilon model is applied to modeling the turbulence-chemistry interaction.

scholarly journals CFD simulation on centrifugal pump impeller with splitter blades

2020 ◽  
Vol 24 (1) ◽  
pp. 3-7 ◽  
Author(s):  
Henrique M. P. Rosa ◽  
Bruno S. Emerick
Keyword(s):  
Centrifugal Pump ◽  
Cfd Simulation ◽  
Computational Simulations ◽  
Pump Impeller ◽  
Impeller Blade ◽  
Flow Rates ◽  
Computational Fluids Dynamics ◽  
Ansys Cfx ◽  
Computational Fluids ◽  
Centrifugal Pump Impeller

ABSTRACT The present paper aims to present the analysis and comparison of results of computational simulations using Computational Fluids Dynamics (CFD) in impellers of centrifugal pump. Three impellers were simulated: 1) original impeller, 2) original impeller with splitter blades at outlet; 3) original impeller with splitter blades at inlet. The splitters occupied 30% of the length of the main blades. They were simulated using the ANSYS-CFX software system in 1500 rpm rotational speed and at different flow rates. The turbulence model assumed was the Shear Stress Transport (SST). The results were used to build impeller blade head curves, besides the presentation of pressure distribution and streamline behaviour inside the impeller. It was verified that the insertion of the splitter blades reduced the impeller blade head, mainly the impeller with outlet splitter, whose reduction was more intense.

scholarly journals A CFD approach to assess the effects of different opening combinations in poultry houses

2017 ◽  
Vol 21 (12) ◽  
pp. 852-857 ◽  
Author(s):  
Jairo A. O. Saraz ◽  
Keller S. O. Rocha ◽  
Flavio A. Damasceno ◽  
Ilda F. F. Tinoco ◽  
Robinson Osorio ◽  
...  
Keyword(s):  
Cfd Model ◽  
Temperature Level ◽  
Computational Fluids Dynamics ◽  
Air Inlet ◽  
Poultry Houses ◽  
Poultry Facilities ◽  
Computational Fluids ◽  
Building Typology ◽  
Commercial Poultry ◽  
Reduce Energy Consumption

ABSTRACT The aim of this study was to use computational fluids dynamics (CFD) to evaluate hygiene and comfort conditions in function of temperature level and ammonia (NH3) concentration during the night in commercial poultry houses used in Brazil and countries with tropical and subtropical climates. Four models with different curtain heights and different air inlet and outlet positions were used, adopting the open building typology without thermal insulation. The validated CFD model did not present statistical differences from the experimental data, making it possible to use this model to predict the behavior in the four proposed cases. This model can be used to improve the internal conditions of the poultry facilities during the night and could be an important tool to reduce energy consumption and generate better conditions for animal production of chicks over 21 days old.

Modeling and Simulation of an Underwater Remotely Operated Vehicle (ROV) for Surveillance and Inspection of Port Facilities Using CFD Tools

2008 ◽  
Author(s):  
Rau´l A. Valencia ◽  
Juan A. Rami´rez ◽  
Luis B. Gutie´rrez ◽  
Manuel J. Garci´a
Keyword(s):  
Visual Information ◽  
Computer Aided Design ◽  
3D Scanner ◽  
Remotely Operated Vehicle ◽  
Operational Conditions ◽  
Computational Fluids Dynamics ◽  
Port Facilities ◽  
Computational Fluids ◽  
Aided Design ◽  
Underwater Structures

This article presents theoretical and computational studies with Computational Fluids Dynamics (CFD) tools of an Underwater Remotely Operated Vehicle (ROV), required to obtain reliable visual information, used for surveillance and maintenance of ship shells and underwater structures of Colombian port facilities. The thrust force is analyzed at the operational conditions by using CFD tools (FLUENT™, CFX™, COSMOSFLOW™) and the information about forces, torques and power of the vehicle’s thrusters is obtained. The commercial propellers were modeled by using a reverse engineering process with a 3D scanner and Computer Aided Design (CAD) software (RAPIDFORM™). The results obtained with the CFD package allowed to evaluate several operating scenarios of the vehicle that are used for feedback purposes in the design process of the ROV before it be manufactured.

Sign in / Sign up

Export Citation Format

Share Document