Hydrodynamic Optimization of a Containership

2021 ◽  
Author(s):  
Yanxin Feng ◽  
Bettar El Moctar ◽  
Thomas E. Schellin
Keyword(s):  
Hydrodynamic Optimization

New Promising Generation of Twin-Gondola LNG Carriers Optimized with the Aid of CFD Calculations

2005 ◽  
Author(s):  
Henk V. Valkhof ◽  
Eduardo Minguito ◽  
Klaas Kooiker
Keyword(s):  
Viscous Flow ◽  
Far East ◽  
Point Of View ◽  
Maximum Efficiency ◽  
Hull Form ◽  
Overall Design ◽  
Computational Fluid Dynamics Cfd ◽  
New Generation ◽  
Hydrodynamic Optimization ◽  
Adequate Design

As natural gas is becoming an important energy source, a large fleet is needed to transport it in liquefied form across the oceans in specially designed LNG carriers from mainly the Middle East towards the Far East. During the overall design process of such a vessel the shape of the hull form and its propulsors play an important role from a hydrodynamic point of view. This paper describes the design of a twin-gondola LNG carrier for Navantia. The twingondola aft body has proven to be an adequate design concept, but due to the complexity of the flow around the aft body the design should be carried out with great care. Computational Fluid Dynamics (CFD) tools are extremely valuable in the hydrodynamic optimization process of the hull. In this design both potential flow codes and viscous flow codes have been used to obtain the optimum hull form. With the results of the PARNASSOS viscous flow calculations it was possible to make decisions with regard to the horizontal angle and the inclination of the gondolas, and the slope of the buttocks in the area between the gondolas. Special attention has been paid to avoid flow separation around the aft body. The gondolas have been oriented in such a way that maximum efficiency is achieved. The performance of the resulting design has been verified by model tests in MARIN’s Deep Water Towing Tank. Given the very promising results of this new generation of LNG carriers, achieving besides the excellent propulsive properties also a higher payload target, the yard became more competitive and is expecting quite some orders for this particular ship type.

Hydrodynamic Optimization of a Wedge Hull

2015 ◽  
Author(s):  
Lijue Wang ◽  
Fuxin Huang ◽  
Chi Yang ◽  
Raju Datla
Keyword(s):  
Hydrodynamic Performance ◽  
Surface Mesh ◽  
Nurbs Surface ◽  
Bottom Edge ◽  
Hull Form ◽  
Entrance Angle ◽  
Total Drag ◽  
Rounded Corner ◽  
Bulbous Bow ◽  
Hydrodynamic Optimization

A novel wedge-shaped hull form is optimized for reduced drag using a further developed practical hydrodynamic optimization tool. The hull features a sharp entrance angle, rectilinear sides, sharp bottom edges, a triangular waterplane and a linear aftward taper from a deep bow to a shallow transom. The optimization involves two modifications of the hull form, one is to smooth out the sharp bottom edge with a rounded corner and the other is to generate a bulbous bow. In order to perform the hydrodynamic optimization of the hull, a Non-Uniform Rational BSpline (NURBS)-based hull surface modification tool, a NURBS surface mesh generator, a surrogate model and an evolutionary optimization solver are developed and integrated into the practical hydrodynamic optimization tool. The hydrodynamic performances, i.e., the total drag and the flow field near the obtained hull bodies are assessed and compared with the original wedge hull using numerical simulations. Results showed that rounding the sharp edge of the wedge hull can reduce the total drag by alleviating the flow separations around the hull body. The wedge hull with rounded bottom edge and optimized bulbous bow can achieve larger drag reduction and the flow separations are almost eliminated. The total drag of the optimal hull is compared with an earlier-optimized wedge hull that has a different type of bulbous bow, whose hydrodynamic performance has been validated by model tests.

scholarly journals Contribution to the marine propeller hydrodynamic design for small boats in the Amazon region

2016 ◽  
Vol 46 (1) ◽  
pp. 37-46 ◽  
Author(s):  
Breno Inglis FAVACHO ◽  
Jerson Rogério Pinheiro VAZ ◽  
André Luiz Amarante MESQUITA ◽  
Fábio LOPES ◽  
Antonio Luciano Seabra MOREIRA ◽  
...  
Keyword(s):  
Control Volume ◽  
Classical Model ◽  
Computational Cost ◽  
Marine Propeller ◽  
Propeller Design ◽  
Thrust And Torque ◽  
The Mathematical Model ◽  
Hydrodynamic Relation ◽  
Hydrodynamic Optimization ◽  
Low Computational Cost

ABSTRACTIn the Amazon, river navigation is very important due to the length of navigable rivers and the lack of alternative road networks. Boats usually operate in unfavorable conditions, since there is no hydrodynamic relation among propellers, geometry, and the dimensions of the boat hull. Currently, there is no methodology for propeller hydrodynamic optimization with low computational cost and easy implementation in the region. The aim of this work was to develop a mathematical approach for marine propeller design applied to boats typically found on Amazon rivers. We developed an optimized formulation for the chord and pitch angle distributions, taking into account the classical model of Glauert. A theoretical analysis for the thrust and torque relationships on an annular control volume was performed. The mathematical model used was based on the Blade Element Momentum Theory (BEMT). We concluded that the new methodology proposed in this work demonstrates a good physical behavior when compared with the theory of Glauert and the experimental data of the Wageningen B3-50 propeller.

Multidisciplinary Design Optimization of a Naval Surface Combatant

2003 ◽  
Vol 47 (01) ◽  
pp. 1-12 ◽  
Author(s):  
Daniele Peri ◽  
Emilio F. Campana
Keyword(s):  
Design Optimization ◽  
Multidisciplinary Design Optimization ◽  
Optimization Methods ◽  
Ship Design ◽  
Multidisciplinary Design ◽  
Construction Costs ◽  
Gradient Based ◽  
Numerical Tools ◽  
Surface Combatant ◽  
Hydrodynamic Optimization

Whereas shape optimal design has received considerable attention in many industrial contexts, the application of automatic optimization procedures to hydrodynamic ship design has not yet reached the same maturity. Nevertheless, numerical tools, combining together modern computational fluid dynamics and optimization methods, can aid in the ship design, enhancing the operational performances and reducing development and construction costs. This paper represents an attempt of applying a multidisciplinary design optimization (MDO) procedure to the enhancement of the performances of an existing ship. At the present stage the work involves modeling, development, and implementation of algorithms only for the hydrodynamic optimization. For a naval surface combatant, the David Taylor Model Basin (DTMB) model ship 5415, a three-objective functions optimization for a two-discipline design problem is devised and solved in the framework of the MDO approach. A simple decision maker is used to order the Pareto optimal solutions, and a gradient-based refinement is performed on the selected design.

Sign in / Sign up

Export Citation Format

Share Document