PENCIRIAN SESAR-SESAR MAJOR DI SEKITAR SEMENANJUNG MALAYSIA BERDASARKAN TEKNIK SATELIT GRAVITI

2018 ◽  
Vol 80 (2) ◽  
Author(s):  
Nurul Fairuz Diyana Bahrudin ◽  
Umar Hamzah
Keyword(s):  
Gravity Data ◽  
Gravity Anomalies ◽  
Peninsular Malaysia ◽  
Gravity Inversion ◽  
Kuala Lumpur ◽  
Euler Deconvolution ◽  
Satellite Gravity ◽  
3D Euler Deconvolution ◽  
Major Fault ◽  
Fault Structures

Major fault structures of Peninsular Malaysia were interpreted by satellite gravity data obtained from EGM2008. Filtering including THD, TVD, TDR, TDX and Euler Deconvolution inversion techniuques were applied to the data and successfully delineated the major faults especially located in the area separating the granite and sedimentary rock such as Bok Bak, Kuala Lumpur, Bukit Tinggi and Lebir faults. The main finding of this research is the boundary separating the western and eastern belt of Peninsular Malaysia namely the Bentong-Raub Suture by the abrupt changes of gravity anomalies between the two belts. The average depths and dips of Kuala Lumpur, Bukit Tinggi and Seremban faults were estimated by gravity inversion 3D Euler Deconvolution. 

Study of gravity anomalies in the Bragantina region: Comparison between terrestrial and satellite gravity data

2017 ◽  
Author(s):  
Nelson de Lima Ribeiro Filho ◽  
Raissa Moraes Baldez ◽  
Boris Chaves Freimann
Keyword(s):  
Gravity Data ◽  
Gravity Anomalies ◽  
Satellite Gravity

A method for inversion of 1D vertical soundings of gravity anomalies

Geophysics ◽  
2018 ◽  
Vol 83 (2) ◽  
pp. G15-G23
Author(s):  
Andrea Vitale ◽  
Domenico Di Massa ◽  
Maurizio Fedi ◽  
Giovanni Florio
Keyword(s):  
Potential Field ◽  
Field Data ◽  
Gravity Data ◽  
Finite Size ◽  
Gravity Anomalies ◽  
Real Data ◽  
Gravity Inversion ◽  
Chain Process ◽  
Potential Field Data ◽  
Gamma Density

We have developed a method to interpret potential fields, which obtains 1D models by inverting vertical soundings of potential field data. The vertical soundings are built through upward continuation of potential field data, measured on either a profile or a surface. The method assumes a forward problem consisting of a volume partitioned in layers, each of them homogeneous and horizontally finite, but with the density changing versus depth. The continuation errors, increasing with the altitude, are automatically handled by determining the coefficients of a third-order polynomial function of the altitude. Due to the finite size of the source volume, we need a priori information about the total horizontal extent of the volume, which is estimated by boundary analysis and optimized by a Markov chain process. For each sounding, a 1D inverse problem is independently solved by a nonnegative least-squares algorithm. Merging of the several inverted models finally yields approximate 2D or 3D models that are, however, shown to generate a good fit to the measured data. The method is applied to synthetic models, producing good results for either perfect or continued data. Even for real data, i.e., the gravity data of a sedimentary basin in Nevada, the results are interesting, and they are consistent with previous interpretation, based on 3D gravity inversion constrained by two gamma-gamma density logs.

Topography of the crust–mantle interface under the Western Superior craton from gravity data

2003 ◽  
Vol 40 (10) ◽  
pp. 1307-1320 ◽  
Author(s):  
B Nitescu ◽  
A R Cruden ◽  
R C Bailey
Keyword(s):  
Gravity Data ◽  
Three Dimensional ◽  
Gravity Anomalies ◽  
Gravity Inversion ◽  
Constant Density ◽  
Inversion Algorithm ◽  
Data Set ◽  
Mantle Boundary ◽  
Refraction Seismic ◽  
Superior Craton

The Moho undulations beneath the western part of the Archean Superior Province have been investigated with a three-dimensional gravity inversion algorithm for a single interface of constant density contrast. Inversion of the complete gravity data set produces unreal effects in the solution due to the ambiguity in the possible sources of some crustal gravity anomalies. To avoid these effects a censored gravity data set was used instead. The inversion results are consistent with reflection and refraction seismic data from the region and, therefore, provide a basis for the lateral correlation of the Moho topography between parallel seismic lines. The results indicate the existence of a major linear east–west-trending rise of the Moho below the metasedimentary English River subprovince, which is paralleled by crustal roots below the granite–greenstone Uchi and Wabigoon subprovinces. This correlation between the subprovincial structure at the surface and deep Moho undulations suggests that the topography of the crust–mantle boundary is related to the tectonic evolution of the Western Superior belts. Although certain features of the crust–mantle boundary are likely inherited from the accretionary and collisional stages of the Western Superior craton, gravity-driven processes triggered by subsequent magmatism and crustal softening may have played a role in both the preservation of those features, as well as in the development of new ones.

scholarly journals GRAVITY ANOMALY ASSESSMENT USING GGMS AND AIRBORNE GRAVITY DATA TOWARDS BATHYMETRY ESTIMATION

2016 ◽  
Vol XLII-4/W1 ◽  
pp. 287-297
Author(s):  
A. Tugi ◽  
A. H. M. Din ◽  
K. M. Omar ◽  
A. S. Mardi ◽  
Z. A. M. Som ◽  
...  
Keyword(s):  
Gravity Anomaly ◽  
Gravity Field ◽  
Ocean Circulation ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Airborne Gravity ◽  
Satellite Gravity ◽  
Earth’S Gravity Field ◽  
Explorer Mission ◽  
Satellite Gravity Missions

The Earth’s potential information is important for exploration of the Earth’s gravity field. The techniques of measuring the Earth’s gravity using the terrestrial and ship borne technique are time consuming and have limitation on the vast area. With the space-based measuring technique, these limitations can be overcome. The satellite gravity missions such as Challenging Mini-satellite Payload (CHAMP), Gravity Recovery and Climate Experiment (GRACE), and Gravity-Field and Steady-State Ocean Circulation Explorer Mission (GOCE) has introduced a better way in providing the information on the Earth’s gravity field. From these satellite gravity missions, the Global Geopotential Models (GGMs) has been produced from the spherical harmonics coefficient data type. The information of the gravity anomaly can be used to predict the bathymetry because the gravity anomaly and bathymetry have relationships between each other. There are many GGMs that have been published and each of the models gives a different value of the Earth’s gravity field information. Therefore, this study is conducted to assess the most reliable GGM for the Malaysian Seas. This study covered the area of the marine area on the South China Sea at Sabah extent. Seven GGMs have been selected from the three satellite gravity missions. The gravity anomalies derived from the GGMs are compared with the airborne gravity anomaly, in order to figure out the correlation (R<sup>2</sup>) and the root mean square error (RMSE) of the data. From these assessments, the most suitable GGMs for the study area is GOCE model, GO_CONS_GCF_2_TIMR4 with the R<sup>2</sup> and RMSE value of 0.7899 and 9.886 mGal, respectively. This selected model will be used in the estimating the bathymetry for Malaysian Seas in future.

scholarly journals Efficient Use of Satellite Gravity Anomalies for mapping the Great Sumatran Fault in Aceh Province

2019 ◽  
Vol 9 (02) ◽  
pp. 61
Author(s):  
Muhammad Yanis ◽  
Marwan Marwan ◽  
Nazli Ismail
Keyword(s):  
Gravity Data ◽  
Gravity Anomalies ◽  
Geological Structure ◽  
Geological Mapping ◽  
Capital City ◽  
Satellite Gravity ◽  
Alluvial Deposits ◽  
The North ◽  
Aceh Province ◽  
Tilt Derivative

<p>Gravity Satellite has been widely used in tectonic studies and regional of geological mapping. The Satellite Gravity data are provided free by Scripps Institution of Oceanography, University of California San Diego. The data are acquired by GEOSAT and ERS-1 satellites with a 1.5 km resolution for one pixel. For a further application, the tilt derivative analytic technique was used in order to enhance linear trends of the geological structure revealed by the Bouguer anomalies. The method is represented by the value of an angle between the total horizontal and vertical derivative from the gravity data. The results show that the tilt derivative calculation has been able to map clearly some geological structures on the north of Sumatra i.e., the Aceh and the Seulimeuem segments, as well as some local faults around them. On the other hand, Banda Aceh as the capital city of Aceh Province and Pidie District is dominated by positive values of the tilt derivative anomalies. The data coincide with geological maps of both areas where they are covered by alluvial deposits. Based on the result, it can be concluded that the tilt derivative method is potentially used for quick interpretation of the satellite gravity data.</p>

Stacked global satellite gravity profiles

Geophysics ◽  
1999 ◽  
Vol 64 (6) ◽  
pp. 1748-1755 ◽  
Author(s):  
Mara M. Yale ◽  
D. T. Sandwell
Keyword(s):  
Reference Model ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
The Caspian Sea ◽  
Satellite Altimeter ◽  
Satellite Gravity ◽  
Gravity Field Recovery ◽  
Global Gravity ◽  
Wavelength Resolution ◽  
Along Track

Gravity field recovery from satellite altimetry provides global marine coverage but lacks the accuracy and resolution needed for many exploration geophysics studies. The repeating ground tracks of the ERS-1/2, Geosat, and Topex/Poseidon altimeters offer the possibility of improving the accuracy and resolution of gravity anomalies along widely spaced (∼40-km spacing) tracks. However, complete ocean coverage is usually needed to convert the sea‐surface height (or along‐track slope) measurements into gravity anomalies. Here we develop and test a method for constructing stacked gravity profiles by using a published global gravity grid (Sandwell and Smith, 1997), V7.2, as a reference model for the slope‐to‐gravity anomaly conversion. The method is applied to stacks (averages) of Geosat/ERM (up to 62 cycles), ERS-1/2 (up to 43 cycles), and Topex (up to 142 cycles) satellite altimeter profiles. We assess the accuracies of the ERS-1/2 profiles through a comparison with a gravity model of the northern Gulf of Mexico (profiles provided by EDCON Inc.). The 40 ERS profiles evaluated have a mean rms difference of 3.77 mGal and full wavelength resolution (0.5 coherence) of 24 km. Our processing retains wavelengths as short as 10 km so smaller, large‐amplitude features can be resolved, especially in shallow ocean areas (<1000 m deep). We provide an example of combining these higher resolution profiles with lower resolution gravity data in the Caspian Sea.

Euler deconvolution of gravity anomalies from thick contact/fault structures with extended negative structural index

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. I51-I58 ◽  
Author(s):  
Petar Stavrev ◽  
Alan Reid
Keyword(s):  
Field Data ◽  
Gravity Anomalies ◽  
Potential Fields ◽  
Contact Structures ◽  
Euler Deconvolution ◽  
Structural Index ◽  
Infinite Slab ◽  
Fault Structures ◽  
Structural Indices ◽  
Analytical Expressions

The concept of extended Euler homogeneity of potential fields is examined with respect to all variables of length dimension in their analytical expressions. This reveals the possible existence of positive degrees of homogeneity or corresponding negative structural indices considered as extensions of the Thompson’s structural indices in Euler deconvolution. This approach is implemented for a contact gravity model, represented by a 2D semi-infinite slab with large thickness relative to its depth. Applying Euler deconvolution on synthetic and field data indicates that the positive degree of homogeneity, i.e., the extended negative structural index, is the appropriate one for the inversion of gravity anomalies from contact structures.

scholarly journals A NOVEL REGIONAL-RESIDUAL SEPARATION APPROACH FOR GRAVITY DATA THROUGH CRUSTAL MODELING

2018 ◽  
Vol 36 (4) ◽  
pp. 1
Author(s):  
Nelson Ribeiro Filho ◽  
Cristiano Mendel Martins ◽  
Renata de Sena Santos
Keyword(s):  
Gravity Data ◽  
Gravity Anomalies ◽  
Forward Modeling ◽  
Gravity Modeling ◽  
Gravity Inversion ◽  
Separation Procedure ◽  
New Approach ◽  
Crustal Model ◽  
Main Target ◽  
Complex Geology

ABSTRACT. Gravity anomalies normally contain information of all sources beneath Earth’s surface. Once residual anomalies exhibit information about the main target, the knowledge of this specific residual signal is extremely important to interpretation. To find this signal, it’s necessary to perform regional-residual separation. We present here a new approach of separation by using gravity crustal modeling. We divide the surface in prisms, with density given by GEMMA. We calculate the regional signal, assuming Earth’s crust can be the source of observed anomaly. This methodology was applied on Barreirinhas basin-Brazil. Its formation is related to geologic events in South America-Africa break. Besides, the complex geology is the main obstacle on finding the residual anomaly. We compare our methodology with robust-polynomial fitting and spectral-analysis. They were not able to identify the residual anomaly. Main trouble relies on absence of crust information. Those kind of environment usually requires forward modeling and/or gravity inversion. On the other hand, our approach considers all crust’s parameters. Then the difficulty on choosing the residual no longer exists. The residual anomaly follows a geologic pattern. The crustal depocenter was mapped between structural faults. Therefore, our results satisfies the main expectation and are extremely linked to Barreirinhas basin’s geological background. We recommend this separation procedure, once Earth’s crustal model and gravity data are available for all planet.Keywords: Gravity modeling; GEMMA model; Barreirinhas basin; residual anomaly. RESUMO. Anomalias gravimétricas contêm informações de todas as fontes na superfície terrestre. Uma vez que anomalias residuais exibem informações sobre alvos principais, o conhecimento desse específico sinal residual é extremamente importante para interpretação. Para encontrá-lo, é necessário realizar separação regional-residual. Apresentamos aqui uma nova abordagem de separação utilizando a modelagem gravimétrica crustal. Discretizamos a superfície em prismas, com densidade fornecida pelo modelo GEMMA. Calculamos o sinal regional, assumindo que a crosta terrestre é a fonte da anomalia observada. Aplicamos esta metodologia na bacia de Barreirinhas - Brasil, que tem sua formação relacionada aos eventos geológicos de separação da América do Sul e África. Além disso, a complexidade geológica é considerada o principal obstáculo para encontrar esta anomalia residual. Comparamos nossa metodologia com Ajuste Polinomial Robusto e Análise Espectral. Essas técnicas não foram capazes de identificar a anomalia residual. O principal problema se dá pela ausência de informações acerca da crosta. Para esse ambiente, geralmente requer modelagem direta e/ou inversão geofísica. Por outro lado, nossa abordagem considera todos os parâmetros crustais e a dificuldade em escolher o residual deixa de existir. A anomalia residual apresenta um padrão geológico. O depocentro crustal foi mapeado entre falhas estruturais. Nossos resultados satisfazem a expectativa principal e estão extremamente ligados ao cenário geológico da bacia. Recomendamos este procedimento de separação, uma vez que os modelos crustais e dados gravimétricos estão disponíveis para todo o planeta.Palavras-chave: Modelagem gravimétrica; modelo GEMMA; bacia de Barreirinhas; anomalia residual

scholarly journals Usporedba različitih pristupa Bouguer-ove redukcije na temelju satelitskih gravimetrijskih podataka

Geofizika ◽  
2020 ◽  
Vol 37 (2) ◽  
pp. 237-261
Author(s):  
Fan Luo ◽  
Xin Tao ◽  
Guangming Fu ◽  
Chong Zhang ◽  
Kun Zhang ◽  
...  
Keyword(s):  
Gravity Anomaly ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Gravitational Effect ◽  
Seismic Profile ◽  
Bouguer Gravity ◽  
Seismic Profiles ◽  
Satellite Gravity ◽  
Free Air ◽  
Free Air Gravity

Satellite gravity data are widely used in the field of geophysics to study deep structures at the regional and global scales. These data comprise free-air gravity anomaly data, which usually need to be corrected to a Bouguer gravity anomaly for practical application. Bouguer reduction approaches can be divided into two methods based on the coordinate system: the spherical coordinates method (SBG) and the Cartesian coordinates method; the latter is further divided into the CEBG and CBG methods, which do and do not include the Earth’s curvature correction. In this paper, free-air gravity anomaly data from the eastern Tibetan Plateau and its adjacent areas were used as the basic data to compare the CBG, CEBG, and SBG Bouguer gravity correction methods. The comparison of these three Bouguer gravity correction methods shows that the effect of the Earth’s curvature on the gravitational effect increases with increasing elevation in the study area. We want to understand the inversion accuracy for the data obtained by different Bouguer gravity reduction approaches. The depth distributions of the Moho were obtained by the interface inversion of the Bouguer gravity anomalies obtained by the CBG, CEBG, and SBG, and active seismic profiles were used as references for comparison and evaluation. The results show that the depths of the Moho obtained by the SBG inversion are more consistent with the measured seismic profile depths. Therefore, the SBG method is recommended as the most realistic approach in the process of global or regional research employing gravity data.

Sign in / Sign up

Export Citation Format

Share Document