PERFORMANCE EVALUATION OF FOUR-STROKE SI (SPARK IGNITION) ENGINE USING ETHANOL-GASOLINE BLEND E50 AT VARIABLE LOAD AND COMPRESSION RATIO

2016 ◽  
Vol 79 (1) ◽  
Author(s):  
M. A. Khattak ◽  
Anique Mukhtar ◽  
M. W. Anjum ◽  
S. Kamran Afaq ◽  
Muhammad Abdul Ahad ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Consumption Rate ◽  
Gasoline Engine ◽  
Spark Ignition Engine ◽  
Variable Load ◽  
Peak Oil ◽  
Si Engine ◽  
Fuel Consumption Rate

Due to combination of factors, such as environmental concerns, high oil prices and the potential for peak oil, development of cleaner alternative fuels and advanced power systems for vehicles has become a high priority for many governments and vehicle manufacturers around the world. Use of Gasoline as an alternative fuel in Gasoline engine is becoming a need, looking at the scarcity of petroleum fuels in near future. This paper investigates the influence of compression ratio and ethanol-gasoline blending to find the effects on four-stroke SI engine performance. In this research, air cooled engine having compression ratio of 9.1 & 9.7 is used. Fuel blend E50 is used in the study and engine operated at a speed range of 600-1100 rpm. Maximum power was obtained for E50 fuel at a compression ratio of 9.1, while, a minimum fuel consumption rate was obtained at a compression ratio of 9.7. This clearly depicts that as compression ratio increases, fuel consumption rate decreases considerably. Further, experimental results showed that comparing several blends, 50% ethanol is cost and power effective for the four-stroke SI engine. 

Assessment of Manual, Automatic and Continuously Variable Transmission Powertrains for Gasoline Engine Powered Midsize Saloon Vehicle

2015 ◽  
Vol 7 (3) ◽  
Author(s):  
Eid S. Mohamed ◽  
Mohamed I. Khalil ◽  
Shawki A. Abouel-Seoud
Keyword(s):  
Fuel Consumption ◽  
Consumption Rate ◽  
Gasoline Engine ◽  
Automatic Transmission ◽  
Continuously Variable Transmission ◽  
Fuel Consumption Rate ◽  
Variable Transmission ◽  
Unburned Hydrocarbons ◽  
Road Performance ◽  
Emission Index

Modern integrated powertrains allow great scope for improvements in driveability, emissions and fuel consumption by optimizing the engine speed and load selection to deliver the demanded power. The aim of this study is to assess the exhaust emissions, road performance, road acceleration and fuel consumption of gasoline engine powered vehicle. The proposed emission index and fuel consumption rate are verified through chassis dynamometer tests using the urban part of European drive cycle (ECE-15). A midsize saloon vehicle equipped with an integrated gasoline engine with manual transmission (MT), automatic transmission (AT) and continuously variable transmission (CVT) powertrains. The results indicate that most of the carbon monoxide, carbon dioxide and unburned hydrocarbons emission, driveability and fuel consumption rate were improved for the CVT powertrains.

scholarly journals An Attempt to Reduce the Emission of Spark-Ignition Engine with Mixtures of Bioethanol and Gasoline as Substitute Fuels

2019 ◽  
Vol 26 (3) ◽  
pp. 31-38
Author(s):  
Wojciech Gis ◽  
Maciej Gis ◽  
Piotr Wiśniowski ◽  
Mateusz Bednarski
Keyword(s):  
Carbon Dioxide ◽  
Fuel Consumption ◽  
Carbon Dioxide Emissions ◽  
Alternative Fuels ◽  
Negative Impact ◽  
Spark Ignition ◽  
Solid Particles ◽  
Spark Ignition Engine ◽  
Maximum Power ◽  
The Impact

Abstract Limiting emissions of harmful substances is a key task for vehicle manufacturers. Excessive emissions have a negative impact not only on the environment, but also on human life. A significant problem is the emission of nitrogen oxides as well as solid particles, in particular those up to a diameter of 2.5 microns. Carbon dioxide emissions are also a problem. Therefore, work is underway on the use of alternative fuels to power the vehicle engines. The importance of alternative fuels applies to spark ignition engines. The authors of the article have done simulation tests of the Renault K4M 1.6 16v traction engine for emissions for fuels with a volumetric concentration of bioethanol from 10 to 85 percent. The analysis was carried out for mixtures as substitute fuels – without doing any structural changes in the engine's crankshafts. Emission of carbon monoxide, carbon dioxide, hydrocarbons, oxygen at full throttle for selected rotational speeds as well as selected engine performance parameters such as maximum power, torque, hourly and unit fuel consumption were determined. On the basis of the simulation tests performed, the reasonableness of using the tested alternative fuels was determined on the example of the drive unit without affecting its constructions, in terms of e.g. issue. Maximum power, torque, and fuel consumption have also been examined and compared. Thus, the impact of alternative fuels will be determined not only in terms of emissions, but also in terms of impact on the parameters of the power unit.

scholarly journals Design of new clean and efficient combustion mode and thermodynamics research using NSGA-II algorithm

2020 ◽  
Vol 24 (5 Part A) ◽  
pp. 2699-2706
Author(s):  
Guoqing Shen
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Fuel Consumption ◽  
Consumption Rate ◽  
Thermodynamic Characteristics ◽  
Dual Fuel ◽  
Combustion Mode ◽  
Nsga Ii ◽  
Fuel Consumption Rate ◽  
Efficient Combustion

In order to study a new clean and efficient combustion mode, which can relieve the pressure of traditional energy and ensure low emissions, in this study, a diesel/natural gas dual fuel engine is designed by non-dominant sorting genetic algorithm (NSGA-?), and its thermodynamic characteristics are studied. The WP10.290 Diesel engine is modified into a diesel/natural gas dual fuel engine. The emissions of harmful substances and thermal efficiency of the modified engine under different working conditions are compared. The combustion chamber structure and adaptability between combustion chamber and injection parameters are optimized by using NSGA-II algorithm and CFD software. The results show that the emission of NOx and CH4 and the fuel consumption rate can be reduced simultaneously by using the composite combustion model compared with the original engine. When the CH4 emission is close to zero, the fuel consumption rate decreases obviously, and NOx slightly increases. When the angle between the injection holes is 141.57? the amount of NOx in the cylinder is large. When the injection advance angle is 21.91?CA, the pressure in the cylinder is the highest, the CH4 production is the lowest, the NOx production is higher, and the oxygen content in the combustion mixture is less. The NOx production is the lowest. diesel/natural gas dual fuel engine can ensure efficient combustion while reducing emissions. In this study, the performance of the dual fuel engine at various speeds can be further studied, which can provide theoretical support for the design of diesel/natural gas dual fuel engine.

Performance of biomass combustor based drying system for ginger drying

2021 ◽  
Vol 45 (01) ◽  
pp. 19-25
Author(s):  
D. K. Vyas ◽  
N. Seth ◽  
J. J. Chavda
Keyword(s):  
Fuel Consumption ◽  
Flow Rate ◽  
Consumption Rate ◽  
Air Flow ◽  
Air Flow Rate ◽  
Saw Dust ◽  
Fuel Consumption Rate ◽  
Hot Air ◽  
Drying System ◽  
Maize Cobs

A biomass combustor based dryer was evaluated with different biomass for drying of ginger. Biomass combustor based dryer consists of fuel hopper, combustion chamber, heat exchanger, grate for proper combustion of the combustible gas, chimney, ambient air inlet, hot air outlet and drying chamber. The system was evaluated at five fuel consumption rate (1 to 5 kg.h–1) and five air flow rate (100, 150, 200, 300 and 400 m3.h–1) using maize cobs, sized wood and saw dust briquettes for ginger drying. The experimental performances show that the hot air temperature inside the dryer vary between 36 to 81ºC for maize cobs, 53 to 85ºC for sized wood and 49 to 87ºC for biomass briquettes at tested air flow rate and fuel consumption rate in the system. The maximum efficiency of the system was found at the fuel consumption rate of 1 kg.h–1 and 400 m3.h–1 air flow rate using maize cobs, sized wood and saw dust briquettes as fuel respectively. The cost of operation of ginger drying at 1 kg.h–1 fuel consumption rate and 400 m3/h air flow rate was Rs. 32.76, 34.26, 34.76 and 55 per hour using maize cobs, sized wood, saw dust briquettes and mechanical drying system, respectively. Hence, the drying of ginger in biomass combustor based dryer using maize cobs at 1 kg.h–1 fuel consumption rate and 400 m3/h air flow rate resulted in better performance.

A comparative study of the effect of compression ratio on the efficiency and flame development angle in a Cooperative Fuel Research engine fueled with binary gasoline–alcohol blends

2019 ◽  
pp. 146808741985910 ◽  
Author(s):  
Guillermo Rubio-Gómez ◽  
Lis Corral-Gómez ◽  
David Rodriguez-Rosa ◽  
Fausto A Sánchez-Cruz ◽  
Simón Martínez-Martínez
Keyword(s):  
Comparative Study ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Flame Development ◽  
The Impact

In the last few years, increasing concern about the harmful effects of the use of fossil fuels in internal combustion engines has been observed. In addition, the limited availability of crude oil has driven the interest in alternative fuels, especially biofuels. In the context of spark ignition engines, bioalcohols are of great interest owing to their similarities and blend capacities with gasoline. Methanol and ethanol have been widely used, mainly due to their knocking resistance. Another alcohol of great interest is butanol, thanks to its potential of being produced as biofuel and its heat value closer to gasoline. In this study, a comparative study of gasoline–alcohol blend combustion, with up to 20% volume, with neat gasoline has been carried out. A single-cylinder, variable compression ratio, Cooperative Fuel Research-type spark ignition engine has been employed. The comparison is made in terms of fuel conversion efficiency and flame development angle. Relevant information related to the impact in the combustion process of the use of the three main alcohols used in blends with gasoline has been obtained.

scholarly journals Analysis of fuel consumption of a spark ignition engine in the conditions of a variable load

2017 ◽  
Vol 118 ◽  
pp. 00036 ◽  
Author(s):  
Andrzej Bieniek ◽  
Mariusz Graba ◽  
Krystian Hennek ◽  
Jarosław Mamala
Keyword(s):  
Fuel Consumption ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Variable Load

scholarly journals The Technological Progress of the Fuel Consumption Rate for Passenger Vehicles in China: 2009–2016

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2384 ◽  
Author(s):  
Jihu Zheng ◽  
Rujie Yu ◽  
Yong Liu ◽  
Yuhong Zou ◽  
Dongchang Zhao
Keyword(s):  
Fuel Consumption ◽  
Technological Progress ◽  
Consumption Rate ◽  
Joint Venture ◽  
Passenger Vehicles ◽  
Fuel Consumption Rate ◽  
The Difference ◽  
And Performance ◽  
The Relationship ◽  
Better Than

China has set stringent fuel consumption rate (FCR) targets to address the serious environmental and energy security problems caused by vehicles. Estimating the technological progress and tradeoffs between FCR and vehicle attributes is important for assessing the viability of meeting future targets. In this paper, we explored the relationship between vehicle FCR and other attributes using a regression model with data from 2009–2016. We also quantified the difference in the tradeoff between local and joint venture brands. The result showed that from 2009 to 2016, if power and curb mass were held constant, 2.3% and 2.9% annual technological progress should have been achieved for local and joint venture brands, respectively. The effectiveness of fuel-efficient technologies for joint venture brands is generally better than that of local brands. Impacts of other attributes on FCR were also assessed. The joint venture brands made more technological progress with FCR improvement than that of local brands. Even if 100% of technological progress (assume the technological progress in the future were the same as that of 2009–2016) investment were used to improve actual FCR after 2016, it would be difficult to meet 2020 target. Accelerating the adoption of fuel-efficient technologies, and controlling weight and performance, are both needed to achieve the 2020 and 2025 targets.

Sign in / Sign up

Export Citation Format

Share Document