EFFECT OF WET-DRY CYCLING ON BOND BEHAVIOR OF GFRP STRENGTHENED HISTORIC MASONRY STRUCTURES

2016 ◽  
Vol 78 (5-2) ◽  
Author(s):  
Meng Jing ◽  
Werasak Raongjant
Keyword(s):  
Research Work ◽  
Fiber Reinforced Polymer ◽  
Masonry Structures ◽  
Test Results ◽  
Bond Behavior ◽  
Historic Masonry ◽  
Water Permeation ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Cycling Condition

The objective of this research work is to determine the effect of wet-dry cycling on bond behavior of historic masonry structures strengthened by Glass Fiber Reinforced Polymer (GFRP). Shear bond testing was carried out through total 36 specimens exposed to dry, full moisture or wet-dry cycling conditions.  The selected samples were then tested at 0, 30, 60 and 90 days. Post-ageing test was also preceded on total sixty masonry prisms exposed to dry, full moisture or wet-dry cycling conditions. The compressive strengths of selected samples were then tested at 0, 40, 70 and 100 days. The test results showed an obvious decrease of the bond strength between GFRP sheets and bricks in the wet-dry cycling condition. For masonry prisms with or without GFRP strengthening, in the first 40 days, the compressive strength of GFRP bonded prism decreased quickly to the value near that of prism without GFRP. After 40 days the rate of decrease became slow, which means that, sheets retrofitted outside the masonry prisms helped to improve their durability by reducing water permeation. 

Research on Static Load Tests of Damaged Bridge Strengthened with Pre-Stressed HFRP

2014 ◽  
Vol 1079-1080 ◽  
pp. 258-265
Author(s):  
Chen Ning Cai ◽  
Shan He ◽  
Li Na Liu ◽  
Shi Kun Ou
Keyword(s):  
Static Load ◽  
Flexural Rigidity ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Structural Members ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Load Tests

Thispaper presents an experimental study to strengthen an existing bridge usingpre-stressed carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer(GFRP) materials. The method using pre-stressed hybrid fiber reinforced polymer(HFRP) to strengthened structural members is an emerging pre-stressed strengtheningtechnology. In this study, experimental data selected from result of staticloading test conducted to hollow slabs with CFRP/GFRP has been compared with specimenswithout strengthening. Test results showed that the strengthening methoddeveloped in this study could effectively reduce the stress in hollow slab,improving the flexural rigidity and inhibiting the concrete from fracture.

scholarly journals Punching Shear Strength of Reinforced Concrete Flat Plates with GFRP Vertical Grids

2021 ◽  
Vol 11 (6) ◽  
pp. 2736
Author(s):  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Punching Shear ◽  
Test Results ◽  
Shear Reinforcement ◽  
Flat Plates ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Vertical Grids

In this study, the structural behavior of reinforced concrete flat plates shear reinforced with vertical grids made of a glass fiber reinforced polymer (GFRP) was experimentally evaluated. To examine the shear strength, experiments were performed on nine concrete slabs with different amounts and spacings of shear reinforcement. The test results indicated that the shear strength increased as the amount of shear reinforcement increased and as the spacing of the shear reinforcement decreased. The GFRP shear reinforcement changed the cracks and failure mode of the specimens from a brittle punching to flexure one. In addition, the experimental results are compared with a shear strength equation provided by different concrete design codes. This comparison demonstrates that all of the equations underestimate the shear strength of reinforced concrete flat plates shear reinforced with GFRP vertical grids. The shear strength of the equation by BS 8110 is able to calculate the punching shear strength reasonably for a concrete flat plate shear reinforced with GFRP vertical grids.

Concrete Beams Reinforced with GFRP Plates

2017 ◽  
Vol 747 ◽  
pp. 220-225
Author(s):  
Alberto Pedro Busnelli ◽  
Ruben Edgardo López ◽  
Jorge Carlos Adue
Keyword(s):  
Glass Fiber ◽  
Carbon Fibers ◽  
Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
The World ◽  
Critical Resistance

This is the presentation of the research carried out by the Faculty of Engineering at Universidad Nacional de Rosario on the use of pultruded Glass Fiber Reinforced Polymer (GFRP) plates to increase the flexural strength of reinforced concrete beams.Pultruded plates are the type of elements made of composite materials which are most widely used for this kind of strengthening. Although around the world the material used for these plates is carbon fibers, its high cost prevents its widespread use in our country.One of the aims of our research program is, precisely, to verify whether it is possible to substitute such plates for significantly cheaper glass fiber elements manufactured in Argentina. The test results have proved that this alternative is feasible.What's more, the greater thickness of the glass fiber plates allows the use of additional anchor bolts. These bolts provide the system with post-critical resistance and ductility-characteristics which are absolutely necessary, for example, in structures in seismic areas.

scholarly journals Sulfate and Calcium Chloride Resistance of Steel/Glass Fiber-Reinforced Polymer Hybrid Panel for Improved Movable Weir Application

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
S.-K. Lee ◽  
S.-Y. Yoo ◽  
C.-G. Park
Keyword(s):  
Glass Fiber ◽  
Calcium Chloride ◽  
Residual Strength ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Glass Fiber Reinforced Polymer ◽  
Sand Blasting ◽  
Steel Panel ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

This study evaluated the performance of a hybrid panel that can overcome the current problem of corrosion of the steel panels of improved movable weirs when they are exposed to a sulfate and calcium chloride environment such as sea water. A hybrid panel with glass fiber-reinforced polymer (GFRP) layers on both sides of a steel panel means that the central panel is not exposed to the external elements, which can avoid corrosion problems. In this study, to maximize the hybrid panel’s strength and durability, the moisture absorption characteristics and the durability in an accelerated environment were evaluated. The test results were considered to indicate no durability issues as the final absorption ratio was approximately 2.0% or less in all environments. Also, from the accelerated deterioration test results when the steel panel processed by sand blasting was applied in all accelerated deterioration environments, it satisfied the residual strength level of 65% or more. However, in the case without surface processing, upon exposure to MgSO4 solution, it did not satisfy the standard residual strength level of 65%. These results show that sand blasting on the surface of a steel panel is adequate for hybrid panels for improved movable weirs.

Strengthening of reinforced concrete corbels with GFRP overlays

2011 ◽  
Vol 18 (1-2) ◽  
pp. 69-77 ◽  
Author(s):  
Sevket Ozden ◽  
Hilal Meydanli Atalay
Keyword(s):  
Reinforced Concrete ◽  
Reinforcement Ratio ◽  
Fiber Reinforced Polymer ◽  
Peak Performance ◽  
Test Results ◽  
Loading Test ◽  
Load Bearing Capacity ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Normal Strength

AbstractThe strength and post-peak performance of reinforced concrete corbels, strengthened with epoxy bonded glass fiber reinforced polymer (GFRP) overlays, were experimentally investigated. The test variables were the corbel shear span to depth ratio, corbel main reinforcement ratio, and the number and orientation of the GFRP fibers. In total, 24 normal strength concrete, one-third scale, corbel specimens, without hoop reinforcement, were tested to failure under quasi-static gravity loading. Test results revealed that GFRP overlays can easily be used for the enhancement of corbel load bearing capacity, depending on the fiber orientation. The main reinforcement ratio and the number of GFRP plies were found to be the two main variables affecting the level of strength gain in the corbel specimens.

scholarly journals Shear Behavior in Beams Reinforced with Glass-Fiber Reinforced Polymer Bars (GFRPB) without stirrups

2021 ◽  
Vol 9 (1) ◽  
pp. 72-78
Author(s):  
Osama Daoud ◽  
Ahmed Fadul
Keyword(s):  
Shear Strength ◽  
Glass Fiber ◽  
Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Glass Fiber Reinforced Polymer ◽  
Shear Span ◽  
Gfrp Bars ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

The behavior and shear strength of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars was investigated. Total of six reinforced concrete beams without stirrups were constructed and tested up to failure. The beams measured 1400 mm long, 150 mm wide and 300 mm deep and were tested in two-points bending with constant shear span 350 mm in all tested beams, and shear span to depth ratio a/d 1.37. The test variable was the reinforcement ratio. The test beams included three beams designed as tension control (T.C) with GFRP bars, three beams designed as compression control (C.C) with GFRP bars. The test results were compared with predictions provided by ACI 440.1R-15 design guideline and proposed equations in the literature. The test results indicated that the relatively low modulus of elasticity of FRP bars resulted in reducing shear strength. In addition, shear strength provided by ACI 440.1R-15 guideline underestimate shear strength capacity in which proposed equations in the literature had given better prediction than ACI 440.1R-15. The failure mode in T.C beams is diagonal tension by bond failure not by rupture of FRP and C.C beams is shear compression by crushing of the web in extreme fiber.  

Shear Strength of Concrete Wide Beams Shear Reinforced with GFRP Plates

2018 ◽  
Vol 26 (1) ◽  
pp. 111-118
Author(s):  
Min Sook Kim ◽  
Joowon Kang ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Shear Reinforcement ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Shear Performance ◽  
Wide Beams ◽  
Better Than

This paper discusses the experimental results on the shear behavior of concrete wide beams reinforced with glass fiber reinforced polymer (GFRP) plates as shear reinforcement. In order to examine the shear performance, a total of six concrete wide beams were manufactured and tested. All the specimens were designed to have the same number of legs of shear reinforcement. The transverse spacing of shear reinforcement was considered as a variable to investigate the influence of transverse spacing of concrete wide beams. From the test results, it is observed that the shear strength increased when transverse spacing of the shear reinforcement decreased. In addition, an equation is proposed to predict the shear strength of concrete wide beams in order to consider the influence of transverse spacing of the shear reinforcement. The equation is based on the test results and modified ACI 318–14. It is verified that the proposed equation is considered to be better than ACI 318–14.

A Study on Chemical Ageing of Composite Ribbed GFRP Bars under Load

2021 ◽  
Vol 410 ◽  
pp. 611-616
Author(s):  
Zakhar G. Sakoshev ◽  
Aleksey N. Blaznov ◽  
Vyacheslav V. Firsov
Keyword(s):  
Strength Loss ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Gfrp Bars ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Gfrp Bar ◽  
Naoh Solution ◽  
Chemical Ageing ◽  
Reinforcing Filler

Here we explored the chemical durability of glass fiber-reinforced polymer (GFRP) bars under load. Three batches of ribbed GFRP bar specimens were fabricated using binder matrices: ED-22+isomethyltetrahydrophthalic anhydride (iso-MTGFA), ED-22+Ethal-450 and NPPN-631+ iso-MTGFA. As the reinforcing filler, we used an EC17 glass roving (for all the specimen batches). The specimens of each batch were aged in a 1 N alkaline NaOH solution at 60 °C for 2000 hrs. The ageing was performed under a 300 MPa load (30% of the failure stress). The tensile strength of the specimens from each batch following ageing was measured. The tensile test results demonstrated that that the strength loss of the specimens following chemical ageing was 58.9% for batch 1 based on ED-22+iso-MTGFA, 6.6% for batch 2 based on ED-22+Ethal-450, and 33.6% for batch 3 based on NPPN-631 + iso-MTGFA. The specimens of batch 2 based on ED-22+Ethal-450 exhibited the greatest resistance to the NaOH alkaline solution (a strength loss of 6.6%).

Bond-Slip Constitutive Behavior between Fiber-Reinforced Polymer and Masonry

2012 ◽  
Vol 446-449 ◽  
pp. 3165-3170 ◽  
Author(s):  
Yi Zheng ◽  
Jin Qing Jia ◽  
Li Li ◽  
Shi Kuan You
Keyword(s):  
Constitutive Models ◽  
Bond Stress ◽  
Fiber Reinforced Polymer ◽  
Strain Gauges ◽  
Test Results ◽  
Hydraulic Jack ◽  
Bond Slip ◽  
Bond Behavior ◽  
Frp Composite ◽  
Reinforced Polymer

To study the bond behavior and the force transference of FRP plates adhered to masonry. In this paper, experiments of anchorage strength of FRP attached to masonry are done, a 100KN capacity hydraulic jack activated by a manual pump was used to load the specimen. The tensile strength was measured by using a loading transducer, and strain gauges were mounted directly onto the surface of the FRP composite to measure the strain during application of load. Besides the strain and bond stress development and distribution under every grade of loading were studied. Test results show that the maximum local bond stress is not influenced by the FRP bond length, instead it increases with masonry strength. At the same time, the local bond stress--slip curve is obtained. Based on the test results, two new bond stress-slip constitutive models between FRP and masonry were proposed and they turned out to be good matches to the experimental results, which indicate its valuable references for the corresponding codes and engineering applications.

Sign in / Sign up

Export Citation Format

Share Document