DESIGN OF COMBUSTOR FOR MICRO GAS TURBINE TEST RIG AND ITS PERFORMANCE PREDICTION

2015 ◽  
Vol 77 (8) ◽  
Author(s):  
Feng Xian Tan ◽  
Srithar Rajoo ◽  
Meng Soon Chiong ◽  
Cheng Tung Chong ◽  
Alessandro Romagnoli ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Performance Prediction ◽  
Test Rig ◽  
Fuel Price ◽  
Power Generator ◽  
Micro Gas Turbine ◽  
Backup System ◽  
Range Extender ◽  
Auxiliary Power ◽  
And Performance

Stringent emission rules, air pollution, fluctuation of fuel price and depletion of fossil fuel resources are driving the industry to seek for better alternative of power generation. Micro gas turbine (MGT) provides a promising potential to solve the facing problems. MGT could be used in many applications such as in range extender vehicle, auxiliary power generator, power backup system, combine heat and power system, etc. Combustor plays a very crucial role in MGT system as its performance directly affects the emission quality, power output and fuel consumption of the entire system. This paper demonstrates the literature review, design methodology and performance prediction of the combustor designed for a 14.5kW MGT test rig.

Integration of Distributing Energy System I: Modeling and Simulation

2012 ◽  
Vol 512-515 ◽  
pp. 1156-1162
Author(s):  
Jin Yang Wang ◽  
Guo Min Cui ◽  
Fu Yu Peng
Keyword(s):  
Numerical Simulation ◽  
Gas Turbine ◽  
Performance Prediction ◽  
System Modeling ◽  
Energy System ◽  
Primary Energy ◽  
Simulation System ◽  
Generation System ◽  
Micro Gas Turbine ◽  
And Performance

The heating, power and cooling distributing energy system is studied by numerical simulation. System modeling and performance prediction are studied on the tri-generation system based on micro gas turbine as primary energy utilizing equipment in part Ⅰ. The results show: The numerical simulation can replace pilotscale experiment of objective project in the aspects of design and performance prediction of distributing energy system.

Experimental and numerical investigation on micro gas turbine as a range extender for electric vehicle

2020 ◽  
Vol 173 ◽  
pp. 115236 ◽  
Author(s):  
Fenzhu Ji ◽  
Xiangbo Zhang ◽  
Farong Du ◽  
Shuiting Ding ◽  
Yunhai Zhao ◽  
...  
Keyword(s):  
Numerical Investigation ◽  
Gas Turbine ◽  
Electric Vehicle ◽  
Micro Gas Turbine ◽  
Range Extender

Status of the Automotive Ceramic Gas Turbine Development Program: Year Five Progress

1996 ◽  
Author(s):  
Tsubura Nisiyama ◽  
Norio Nakazawa ◽  
Masafumi Sasaki ◽  
Masumi Iwai ◽  
Haruo Katagiri ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Development Program ◽  
Ceramic Materials ◽  
Inlet Temperature ◽  
Test Rig ◽  
Target Values ◽  
Ceramic Components ◽  
Combined Test ◽  
And Performance ◽  
The Individual

Petroleum Energy Center of Japan has been carrying out a 7-year development program to prove the potential of an automotive ceramic gas turbine for five years with the support of the Ministry of International Trade and Industry. The ceramic gas turbine now under development is a regenerative single shaft engine. The output is 100kW, and the turbine inlet temperature (TIT) is 1350°C. All the ceramic components are now entering the 1350°C TIT test phase after completing 1200°C TIT evaluation tests, including durability tests, in various types of test rigs. The compressor-turbine combined test rig and the full assembly test rig which is the same as an actual engine and incorporates all the components are now going through 1200°C TIT function and performance evaluation tests. In the near future, we are planning to increase the TIT to 1350°C. In consideration of the current level of high-temperature, long-term strength available from the ceramic materials, we decided to change the rated speed to 100,000 rpm because the initial rated speed of 110,000 rpm, if unchanged, involves considerable risks. Then we reviewed mainly the designs of the compressor and turbine and revised the target values of the individual components to match the specifications that satisfy the target performance of the engine.

Impact of Different Volume Sizes on Dynamic Stability of a Gas Turbine Fuel Cell Hybrid System

2019 ◽  
Author(s):  
Alessio Abrassi ◽  
Alberto Traverso ◽  
David Tucker ◽  
Eric Liese
Keyword(s):  
Fuel Cell ◽  
Gas Turbine ◽  
Cell System ◽  
Open Loop ◽  
Operating Conditions ◽  
Micro Gas Turbine ◽  
Performance Pressure ◽  
Lumped Parameter ◽  
Turbine Shaft ◽  
And Performance

Abstract A dynamic model is developed for a Micro Gas Turbine (MGT), characterized by an intrinsic free-spool configuration, coupled to large volumes. This is inspired by an experimental facility at the National Energy Technology Laboratory (NETL) called Hyper, which emulates a hybrid MGT and Fuel Cell system. The experiment and model can simulate stable and unstable operating conditions. The model is used to investigate the effects of different volumes on surge events, and to test possible strategies to safely avoid or recover from unstable compressor working conditions. The modelling approach started from the Greitzer lumped parameter approach, and it has been improved with integration of empirical methods and simulated components to better match the real Hyper plant layout and performance. Pressure, flow rate, and frequency plots are shown for the surge behavior comparing two different volume sizes, for cases where gas turbine shaft speed is uncontrolled (open loop) and controlled (closed loop). The ability to recover from a surge event is also demonstrated.

scholarly journals A Test Rig for the Experimental Investigation of a MGT/SOFC Hybrid Power Plant Based on a 3kWel Micro Gas Turbine

2019 ◽  
Vol 113 ◽  
pp. 02012
Author(s):  
Martina Hohloch ◽  
Melanie Herbst ◽  
Anna Marcellan ◽  
Timo Lingstädt ◽  
Thomas Krummrein ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Electrical Power ◽  
Test Rig ◽  
Micro Gas Turbine ◽  
Hybrid Power ◽  
Hybrid Power Plant ◽  
Set Up ◽  
Electrical Power Output

A hybrid power plant consisting of a micro gas turbine (MGT) and a solid oxide fuel cell (SOFC) is a promising technology to reach the demands for future power plants. DLR aims to set up a MGT/SOFC hybrid power plant demonstrator based on a 3 kWel MTT EnerTwin micro gas turbine and an SOFC module with an electrical power output of 30 kWel from Sunfire. For the detailed investigation of the subsystems under hybrid conditions two separate test rigs are set up, one in which the MGT is connected to an emulator of the SOFC and vice versa. The paper introduces the set-up and the functionalities of the MGT based test rig. The special features are highlighted and the possibilities of the cyber physical system for emulation of a hybrid system are explained.

Experimental Investigation of the Performance of a Micro Gas Turbine Fueled With Mixtures of Natural Gas and Biogas

2013 ◽  
Author(s):  
Homam Nikpey ◽  
Mohsen Assadi ◽  
Peter Breuhaus
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Co2 Emissions ◽  
Fuel Mixture ◽  
Combined Heat And Power ◽  
Test Rig ◽  
Heating Value ◽  
Micro Gas Turbine ◽  
Fuel Mixtures ◽  
The Impact

Previously published studies have addressed modifications to the engines when operating with biogas, i.e. a low heating value (LHV) fuel. This study focuses on mapping out the possible biogas share in a fuel mixture of biogas and natural gas in micro combined heat and power (CHP) installations without any engine modifications. This contributes to a reduction in CO2 emissions from existing CHP installations and makes it possible to avoid a costly upgrade of biogas to the natural gas quality as well as engine modifications. Moreover, this approach allows the use of natural gas as a “fallback” solution in the case of eventual variations of the biogas composition and or shortage of biogas, providing improved availability. In this study, the performance of a commercial 100kW micro gas turbine (MGT) is experimentally evaluated when fed by varying mixtures of natural gas and biogas. The MGT is equipped with additional instrumentation, and a gas mixing station is used to supply the demanded fuel mixtures from zero biogas to maximum possible level by diluting natural gas with CO2. A typical biogas composition with 0.6 CH4 and 0.4 CO2 (in mole fraction) was used as reference, and corresponding biogas content in the supplied mixtures was computed. The performance changes due to increased biogas share were studied and compared with the purely natural gas fired engine. This paper presents the test rig setup used for the experimental activities and reports results, demonstrating the impact of burning a mixture of biogas and natural gas on the performance of the MGT. Comparing with when only natural gas was fired in the engine, the electrical efficiency was almost unchanged and no significant changes in operating parameters were observed. It was also shown that burning a mixture of natural gas and biogas contributes to a significant reduction in CO2 emissions from the plant.

Sign in / Sign up

Export Citation Format

Share Document