THE EFFECT OF LIQUID SUCTION HEAT EXCHANGER SUB-COOLER ON PERFORMANCE OF A FREEZER USING R404A AS WORKING FLUID

2015 ◽  
Vol 76 (11) ◽  
Author(s):  
Muhammad Nuriyadi ◽  
Sumeru Sumeru ◽  
Henry Nasution
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Cooling Capacity ◽  
Experimental Results ◽  
Working Fluid ◽  
Liquid Line ◽  
Cabin Temperature

This study presents the effect of liquid-suction heat exchangers (LSHX) sub-cooler in a freezer. The LSHX sub-cooler is a method to increase the cooling capacity of the evaporator by lowering temperature at the condenser outlet. The decrease in temperature of the condenser outlet will cause a decrease in the quality refrigerant entering the evaporator. The lower the quality of the refrigerant entering the evaporator, the higher the cooling capacity produced by the evaporator. The LSHX sub-cooler utilizes a heat exchanger to transfer heat from the outlet of the condenser (liquid line) to the suction of the compressor. In the present study, three different LSHX sub-coolers in the freezer with cabin temperature settings of 0, -10 and -20oC were investigated. The results showed that the lowest and the highest of effectiveness of the heat exchanger were 0.28 and 0.58, respectively. The experimental results also showed that EER reduction is occurred at the cabin temperature setting of 0oC and -10oC, whereas the EER improvements were always occurred at the cabin temperature settings of -20oC.

Design and Analysis of Micro Plastic Heat Exchanger

2012 ◽  
Vol 562-564 ◽  
pp. 1776-1779
Author(s):  
Yue Han ◽  
Heng Zhi Cai ◽  
Ya Jun Zhang ◽  
Da Ming Wu ◽  
Xin Liang Wang
Keyword(s):  
Heat Exchanger ◽  
Thermal Performance ◽  
Heat Exchangers ◽  
Chemical Engineering ◽  
Mechanical Systems ◽  
Experimental Results ◽  
Micro Electro Mechanical Systems ◽  
Micro Heat Exchanger ◽  
Simulation And Experiment ◽  
Energy Engineering

The heat exchanger is widely used in energy engineering, chemical engineering etc. And with development of the MEMS (Micro Electro Mechanical Systems), many researchers are interested in the micro heat exchanger. In this paper, the micro plastic heat exchangers are manufactured by modified PPS. A heat exchanger with polypropylene (PP) is also made for comparison. Simulation and experiment are carried out to determine the thermal performance of the micro plastic heat exchangers. The experimental results are compared with that of simulation. The results show the performance of the micro plastic heat exchanger is very close to that of metal heat exchanger with the same dimension.

What is the Best Solution to Improve Thermal Performance of Storage Tanks With Immersed Heat Exchangers: Baffles or a Divided Tank?

2008 ◽  
Author(s):  
Aaron D. Wade ◽  
Jane H. Davidson ◽  
Julia F. Haltiwanger
Keyword(s):  
Heat Exchanger ◽  
Thermal Performance ◽  
Heat Exchangers ◽  
Thermal Stratification ◽  
Storage Tanks ◽  
Stored Energy ◽  
Tubular Heat Exchanger ◽  
Energy Delivery ◽  
Potential Methods

Prior studies of indirect water storage tanks that employ an immersed heat exchanger to discharge the stored energy have identified two potential methods of improving the rate of energy extraction: 1) an internal baffle to increase the velocity across the heat exchanger, and 2) a divided storage compartment to achieve thermal stratification. Thermal performance of these two options is compared to that of a conventional cylindrical tank during transient discharge. Each tank has a storage volume of 350 liters and a 10 m long, 0.3 m2 coiled tubular heat exchanger. For the specific configurations evaluated, the baffled heat exchanger provides the highest energy delivery rates and heat exchanger outlet temperatures. An analytic model shows the advantage of the divided storage depends on the NTU of the immersed heat exchanger. The heat exchanger employed in the present study is too small to realize the potential benefit of a divided storage. Both options, if used in the appropriate system, can improve thermal performance as measured by the rate and quality of delivered energy. The baffle is most appropriate when storage-side natural convection is the largest thermal resistance of the heat exchanger. The divided tank is useful when the NTU of the heat exchanger exceeds three.

Study on the Heat Transfer Performance of Two Kinds Material for Microstructure Heat Exchanger

2013 ◽  
Vol 712-715 ◽  
pp. 1593-1599
Author(s):  
Jian Zhuang ◽  
Da Ming Wu ◽  
Wei Wang ◽  
Ya Jun Zhang ◽  
Shi Bao Li ◽  
...  
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Heat Transfer Performance ◽  
Cooling Capacity ◽  
Polyphenylene Sulfide ◽  
Polymer Materials ◽  
Manufacturing Cost ◽  
Transfer Performance ◽  
Micro Heat Exchanger ◽  
Metal Materials

In order to verify the possibility that polymer materials for micro heat exchanger could replace metal materials, polymer micro heat exchangers are regarded as the study object. In terms of the experiments and the simulations by Flo EFD software, temperatures, pressures and speeds on micro heat exchanger made by aluminum and conductive plastic Polyphenylene Sulfide (PPS) were carried out analysis respectively. The results showed that the cooling capacities of micro-heat exchangers made by these two materials are quite the same. According to cooling capacity, manufacturing cost and weight, the micro heat exchanger made by conductive plastic is entirely possible to replace the existing metal heat exchanger.

Analysis and Verifications for Meso-Scale Heat Exchanger With Magneto-Hydrodynamic (MHD) Pumps

2003 ◽  
Author(s):  
Pei-Jen Wang ◽  
Chia-Yuan Chang
Keyword(s):  
Heat Exchanger ◽  
Flow Velocity ◽  
Heat Exchangers ◽  
Cooling System ◽  
Cooling Capacity ◽  
Magnetic Flux Density ◽  
Electrically Conducting ◽  
Experimental Apparatus ◽  
Explicit Finite Difference ◽  
Flow Velocity Of Coolant

Electronic devices have been mainly relying on passive heat exchangers to transfer heat away for preventing catastrophic thermal runaway. However, the passive heat exchangers usually provide limited cooling capacity due to spatial limitations of the target systems. In this paper, an active heat exchanging system, based upon MHD pumping principle for driving electrically conducting coolant without utilizing mechanical moving-parts, was studied and experimentally verified. Governing equations of electrically conducting liquids driven by the Lorentz forces were derived by assuming steady state, incompressible and fully developed laminar flow conditions. Furthermore, numerical simulations were conducted with the explicit Finite-Difference Method to evaluate the performance of the heat exchanger. Finally, an experimental apparatus was built for measuring the flow velocity of coolant and the associated total cooling capacity. A significant flow velocity of 1.09 × 102 mm/s at 3 Ampere applied current was observed when the magnetic flux density was kept at 0.4 Tesla. The experimental results concluded that the heat exchanger consumed very low electric power; hence, the cooling system is very promising for applications in micro-fluidic systems.

Analytical and Experimental Investigation of Flow-Reversible Heat Exchangers Using Temperature-Entropy Bond Graphs

1984 ◽  
Vol 106 (2) ◽  
pp. 170-175 ◽  
Author(s):  
Rahmatallah Shoureshi ◽  
Kevin M. McLaughlin
Keyword(s):  
Experimental Investigation ◽  
Heat Exchanger ◽  
Flow Rate ◽  
Heat Exchangers ◽  
Compressible Flows ◽  
Rate Of Change ◽  
Experimental Results ◽  
Bond Graphs ◽  
Rate Oscillation ◽  
Flow Heat

Modeling of heat exchangers using true bond graphs with temperature and rate of change of entropy as power variables is presented. Techniques used for modeling of irreversabilities and compressible flows are shown. The results of two and three lump models are compared with experimental results, with the agreement between those low order models and the experimental results being good. This paper shows how well a three lump model (6th order) can predict the dynamics of an actual reversal of flow. Heat exchanger response to mass flow rate oscillation is presented.

scholarly journals Investigation of heat transfer enhancement in an annular conduit with angled fins using functionalized GNP colloidal suspension

2021 ◽  
Vol 945 (1) ◽  
pp. 012058
Author(s):  
Sayshar Ram Nair ◽  
Cheen Sean Oon ◽  
Ming Kwang Tan ◽  
S.N. Kazi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Power Plants ◽  
Colloidal Suspension ◽  
Industrial Applications ◽  
Point Of View ◽  
Solid Particles ◽  
Working Fluid

Abstract Heat exchangers are important equipment with various industrial applications such as power plants, HVAC industry and chemical industries. Various fluids that are used as working fluid in the heat exchangers such as water, oil, and ethylene glycol. Researchers have conducted various studies and investigations to improve the heat exchanger be it from material or heat transfer point of view. There have been attempts to create mixtures with solid particles suspended. This invention had some drawbacks since the pressure drop was compromised, on top of the occurrence of sedimentation or even erosion, which incurs higher maintenance costs. A new class of colloidal suspension fluid that met the demands and characteristics of a heat exchanger was then created. This novel colloidal suspension mixture was then and now addressed as “nanofluid”. In this study, the usage of functionalized graphene nanoplatelet (GNP) nanofluids will be studied for its thermal conductivity within an annular conduit with angled fins, which encourage swirling flows. The simulation results for the chosen GNP nanofluid concentrations have shown an enhancement in thermal conductivity and heat transfer coefficient compared to the corresponding base fluid thermal properties. The data from this research is useful in industrial applications which involve heat exchangers with finned tubes.

scholarly journals Study on Shell-and-Tube Heat Exchanger Models with Different Degree of Complexity for Process Simulation and Control Design

2018 ◽  
Author(s):  
Javier Bonilla
Keyword(s):  
Heat Exchanger ◽  
Molten Salt ◽  
Heat Exchangers ◽  
Control Strategies ◽  
Thermal Storage ◽  
Working Fluid ◽  
Tube Heat Exchanger ◽  
Test Loop ◽  
Shell And Tube ◽  
Thermal Oil

Many commercial solar thermal power plants rely on indirect thermal storage systems in order to provide a stable and reliable power supply, where the working fluid is commonly thermal oil and the storage fluid is molten salt. The thermal oil - molten salt heat exchanger control strategies, to charge and discharge the thermal storage system, strongly affect the performance of the whole plant. Shell-and-tube heat exchangers are the most common type of heat exchangers used in these facilities. With the aim of developing advanced control strategies accurate and fast dynamic models of shell-and-tube heat exchangers are essential. For this reason, several shell-and-tube heat exchanger models with different degrees of complexity have been studied, analyzed and validated against experimental data from the CIEMAT-PSA molten salt test loop for thermal energy systems facility. Simulation results are compared in steady-state as well as transient predictions in order to determine the required complexity of the model to yield accurate results.

scholarly journals Modelling of Polymeric Shell and Tube Heat Exchangers for Low-Medium Temperature Geothermal Applications

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2737
Author(s):  
Francesca Ceglia ◽  
Adriano Macaluso ◽  
Elisa Marrasso ◽  
Maurizio Sasso ◽  
Laura Vanoli
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Power Plants ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Heat Transfer Area ◽  
Geothermal Fluid ◽  
Shell And Tube

Improvements in using geothermal sources can be attained through the installation of power plants taking advantage of low and medium enthalpy available in poorly exploited geothermal sites. Geothermal fluids at medium and low temperature could be considered to feed binary cycle power plants using organic fluids for electricity “production” or in cogeneration configuration. The improvement in the use of geothermal aquifers at low-medium enthalpy in small deep sites favours the reduction of drilling well costs, and in addition, it allows the exploitation of local resources in the energy districts. The heat exchanger evaporator enables the thermal heat exchange between the working fluid (which is commonly an organic fluid for an Organic Rankine Cycle) and the geothermal fluid (supplied by the aquifer). Thus, it has to be realised taking into account the thermodynamic proprieties and chemical composition of the geothermal field. The geothermal fluid is typically very aggressive, and it leads to the corrosion of steel traditionally used in the heat exchangers. This paper analyses the possibility of using plastic material in the constructions of the evaporator installed in an Organic Rankine Cycle plant in order to overcome the problems of corrosion and the increase of heat exchanger thermal resistance due to the fouling effect. A comparison among heat exchangers made of commonly used materials, such as carbon, steel, and titanium, with alternative polymeric materials has been carried out. This analysis has been built in a mathematical approach using the correlation referred to in the literature about heat transfer in single-phase and two-phase fluids in a tube and/or in the shell side. The outcomes provide the heat transfer area for the shell and tube heat exchanger with a fixed thermal power size. The results have demonstrated that the plastic evaporator shows an increase of 47.0% of the heat transfer area but an economic installation cost saving of 48.0% over the titanium evaporator.

scholarly journals Analysis of Yearly Effectiveness of a Diaphragm Ground Heat Exchanger Supported by an Ultraviolet Sterilamp

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2804
Author(s):  
Sławomir Rabczak ◽  
Paweł Kut
Keyword(s):  
Heat Exchanger ◽  
Ultraviolet Radiation ◽  
Heat Exchangers ◽  
Ground Heat Exchanger ◽  
Atmospheric Air ◽  
Ground Heat Exchangers ◽  
Air Handling Unit ◽  
Operational Costs ◽  
Uv C

Ground heat exchangers supplement ventilation systems and provide notable power gains by heating ventilated air during winter and cooling it in summer. Additionally, they prevent recuperator exchangers from freezing. In atmospheric air, there are many types of contaminants and microorganisms that significantly affect the quality of ventilated air. The air that flows through the system of pipes of the heat exchanger may also become contaminated. In order to remove contamination from ventilated air, ultraviolet radiation may be used. This article presents a concept of using a UV-C (ultraviolet with a wavelength of 200–280 nm) lamp in the air duct in front of the air handling unit connected to the ground heat exchanger. The UV-C lamp, apart from clearing the air, may also decrease operational costs thanks to eliminating contamination that forms bacterial jelly on heat exchanger elements.

Numerical Simulation of the Flow Boiling Heat Transfer Performance of R134a in a Microchannel Evaporator With Louvered Fins

2011 ◽  
Author(s):  
Justin J. Gossard ◽  
Andrew D. Sommers
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Exchangers ◽  
Flow Boiling ◽  
Control Volume ◽  
Cooling Capacity ◽  
Heat Exchanger Design ◽  
Microchannel Tubes ◽  
Louvered Fins

The need for more compact and more efficient heat exchangers in the aerospace, automotive, and HVAC&R industries has led to the development of heat exchangers that utilize minichannel or microchannel tubes coupled with louvered fins. Minichannel and microchannel heat exchangers exhibit enhanced heat transfer with a minimal increase in pressure drop over conventional round tube, plain fin heat exchangers often with a significant reduction in the required refrigeration charge and overall heat exchanger size. This paper presents the development and validation of a finite volume, steady-state evaporator model to be used as an aid in heat exchanger design and analysis. The model focuses on evaporator geometries that include minichannel and microchannel tubes with louvered fins and headers. Multiple published correlations provide the user with options for calculating the air-side and refrigerant-side heat transfer and pressure drops within the control volume. Once the model was validated, it was then briefly used to study the effects of maldistribution of refrigerant within the inlet headers on the cooling capacity and refrigerant side pressure drop.

Sign in / Sign up

Export Citation Format

Share Document