INVESTIGATION OF THERMAL DEGRADATION OF POULTRY PROCESSING DEWATERED SLUDGE USING THERMOGRAVIMETRIC ANALYSIS METHOD

2015 ◽  
Vol 76 (5) ◽  
Author(s):  
N. Aniza ◽  
S. Hassan ◽  
M. F. M. Nor ◽  
K. E. Kee ◽  
Aklilu T.
Keyword(s):  
Particle Size ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Heating Rate ◽  
Degradation Process ◽  
Heating Rates ◽  
Initial Stage ◽  
Poultry Processing ◽  
Effect Of Particle Size ◽  
Dewatered Sludge

Thermal degradation of Poultry Processing Dewatered Sludge (PPDS) was studied using thermogravimetric analysis (TGA) method. The effect of particle size on PPDS samples and operational condition such as heating rates were investigated. The non-isothermal TGA was run under a constant flow of oxygen at a rate of 30 mL/min with temperature ranging from 30ºC to 800ºC. Four sample particle sizes ranging between 0.425 mm to 2 mm, and heating rate between 5 K/min to 20 K/min were used in this study. The TGA results showed that particle size does not have any significant effect on the thermogravimetry (TG) curves at the initial stage, but the TG curves started to separate explicitly at the second stage. Particle size may affect the reactivity of sample and combustion performance due to the heat transfer and temperature gradient. The TG and peak of derivative thermogravimetry (DTG) curves tend to alter at high temperature when heating rate is increased most likely due to the limitation of mass transfer and the delay of degradation process. 

Characterization and thermal degradation kinetics of thermoplastic polyimide based on BAPP

2017 ◽  
Vol 30 (7) ◽  
pp. 787-793 ◽  
Author(s):  
Xu Su ◽  
Yong Xu ◽  
Linshuang Li ◽  
Chaoran Song
Keyword(s):  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Degradation Kinetics ◽  
Degradation Process ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Step Method ◽  
Nitrogen Derivative ◽  
Degradation Reaction ◽  
Kinetics Of

Two kinds of thermoplastic polyimides (PIs) were synthesized via a two-step method with 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP), 4,4′-oxydianiline (ODA) diamine, and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), and their thermal degradation kinetics was studied by thermogravimetric analysis at different heating rates under nitrogen. Derivative thermogravimetric analysis curves indicated a simple, single-stage degradation process in PI BTDA-BAPP and a two-stage degradation process in PI BTDA-ODA-BAPP. The activation energies ( Eas) of the thermal degradation reaction were determined by the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods without a knowledge of the kinetic reaction mechanism. By comparing the values of Ea and weight loss temperatures, it was demonstrated that the thermal stability of PI BTDA-ODA-BAPP was superior to that of PI BTDA-BAPP.

Non-isothermal degradation kinetics for polycarbonate/ polymethylphenylsilsesquioxane composites

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Jiangbo Wang ◽  
Zhong Xin
Keyword(s):  
Activation Energy ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Flame Retardancy ◽  
Degradation Kinetics ◽  
Degradation Process ◽  
Nitrogen Atmosphere ◽  
Ozawa Method ◽  
Degradation Behaviors ◽  
Thermal Degradation Process

AbstractThe thermal degradation behaviors of PC/PMPSQ (polymethylphenylsilsesquioxane) systems were investigated by thermogravimetric analysis (TGA) under non-isothermal conditions in nitrogen atmosphere. During non-isothermal degradation, Kissinger and Flynn-Wall-Ozawa methods were used to analyze the thermal degradation process. The results showed that a remarkable decrease in activation energy ( E ) was observed in the early and middle stages of thermal degradation in the presence of PMPSQ, which indicated that the addition of PMPSQ promoted the thermal degradation of PC. Flynn-Wall-Ozawa method further revealed that PMPSQ significantly increased the activation energy of PC thermal degradation in the final stage, which illustrated that the PMPSQ stabilized the char residues and improved the flame retardancy of PC in the final period of thermal degradation process

scholarly journals Thermal Behavior of Sweet Potato Starch by Non-Isothermal Thermogravimetric Analysis

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 699 ◽  
Author(s):  
Ying Liu ◽  
Liutao Yang ◽  
Chunping Ma ◽  
Yingzhe Zhang
Keyword(s):  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Sweet Potato ◽  
Degradation Kinetics ◽  
Potato Starch ◽  
Activation Energies ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Sweet Potato Starch

In this study, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) methods were used to study the structure, the thermal degradation kinetics, and the thermogram of sweet potato starch, respectively. The thermal decomposition kinetics of sweet potato starch was examined within different heating rates in a nitrogen atmosphere. Different models of kinetic analysis were used to calculate the activation energies using the thermogravimetric data of the thermal degradation process. The activation energies got from Kissinger, Flynn–Wall–Ozawa, and Šatava–Šesták models were 173.85, 174.87, and 174.34 kJ·mol−1, respectively. Thermogravimetry–Fourier transform infrared spectroscopy (TG-FTIR) analysis showed that the main pyrolysis products included water, carbon dioxide, and methane.

scholarly journals Comparative study of the reaction kinetics of three residual biomasses

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2891-2905
Author(s):  
Arnaldo Martinez ◽  
Lourdes Meriño ◽  
Alberto Albis ◽  
Jorge Ortega
Keyword(s):  
Activation Energy ◽  
Heating Rate ◽  
Lignin Content ◽  
Cellulose Degradation ◽  
Calorific Value ◽  
Degradation Process ◽  
Proximate Analysis ◽  
Cellulose Content ◽  
Heating Rates ◽  
Biomass Residues

Kinetic analysis for the combustion of three agro-industrial biomass residues (coconut husk, corn husk, and rice husk) was carried out in order to provide information for the generation of energy from them. The analysis was performed using the results of the data obtained by thermogravimetric analysis (TGA) at three heating rates (10, 20, and 30 K/min). The biomass residues were characterized in terms of proximate analysis, elemental analysis, calorific value, lignin content, α-cellulose content, hemicellulose content, and holocellulose content. The biomass fuels were thermally degraded in an oxidative atmosphere. The results showed that the biomass thermal degradation process is comprised of the combustion of hemicellulose, cellulose, and lignin. The kinetic parameters of the distributed activation energy model indicated that the activation energy distribution for the pseudocomponents follows lignin, cellulose, and hemicellulose in descending order. The activation energy values for each set of reactions are similar between the heating rates, which suggests that it is independent of the heating rate between 10 K/min and 30 K/min. For all the biomass samples, the increased heating rate resulted in the overlap of the hemicellulose and cellulose degradation events.

scholarly journals Thermal Decomposition Kinetic Study of Non-Recyclable Paper and Plastic Waste by Thermogravimetric Analysis

2021 ◽  
Vol 5 (3) ◽  
pp. 54
Author(s):  
Ahmad Mohamed S. H. Al-Moftah ◽  
Richard Marsh ◽  
Julian Steer
Keyword(s):  
Power Generation ◽  
Thermal Decomposition ◽  
Thermogravimetric Analysis ◽  
Thermal Treatment ◽  
Solid Waste ◽  
Heating Rate ◽  
Heating Rates ◽  
Exponential Factor ◽  
Model Free ◽  
Treatment Processes

The global net emissions of the Kyoto Protocol greenhouse gases (GHG), such as carbon dioxide (CO2), fluorinated gases, methane (CH4), and nitrous oxide (N2O), remain substantially high, despite concerted efforts to reduce them. Thermal treatment of solid waste contributes at least 2.8–4% of the GHG in part due to increased generation of municipal solid waste (MSW) and inefficient treatment processes, such as incineration and landfill. Thermal treatment processes, such as gasification and pyrolysis, are valuable ways to convert solid materials, such as wastes into syngas, liquids, and chars, for power generation, fuels, or for the bioremediation of soils. Subcoal™ is a commercial product based on paper and plastics from the source segregated waste that is not readily recyclable and that would otherwise potentially find its way in to landfills. This paper looks at the kinetic parameters associated with this product in pyrolysis, gasification, and combustion conditions for consideration as a fuel for power generation or as a reductant in the blast furnace ironmaking process. Thermogravimetric Analysis (TGA) in Nitrogen (N2), CO2, and in air, was used to measure and compare the reaction kinetics. The activation energy (Ea) and pre-exponential factor A were measured at different heating rates using non-isothermal Ozawa Flynn Wall and (OFW) and Kissinger-Akahira-Sonuse (KAS) model-free techniques. The TGA curves showed that the thermal degradation of Subcoal™ comprises three main processes: dehydration, devolatilization, and char and ash formation. In addition, the heating rate drifts the devolatilization temperature to a higher value. Likewise, the derivative thermogravimetry (DTG) results stated that Tm degradation increased as the heating rate increased. Substantial variance in Ea was noted between the four stages of thermal decomposition of Subcoal™ on both methods. The Ea for gasification reached 200.2 ± 33.6 kJ/mol by OFW and 179.0 ± 31.9 kJ/mol by KAS. Pyrolysis registered Ea values of 161.7 ± 24.7 kJ/mol by OFW and 142.6 ± 23.5 kJ/mol by KAS. Combustion returned the lowest Ea values for both OFW (76.74 ± 15.4 kJ/mol) and KAS (71.0 ± 4.4 kJ/mol). The low Ea values in combustion indicate shorter reaction time for Subcoal™ degradation compared to gasification and pyrolysis. Generally, TGA kinetics analysis using KAS and OFW methods show good consistency in evaluating Arrhenius constants.

Thermal degradation kinetics of oxo-degradable PP/PLA blends

2018 ◽  
Vol 39 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Dev K. Mandal ◽  
Haripada Bhunia ◽  
Pramod K. Bajpai
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Kinetic Parameters ◽  
Degradation Kinetics ◽  
Nitrogen Atmosphere ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Kinetics Of

AbstractIn this article, the influence of polylactide and pro-oxidant on the thermal stability, degradation kinetics, and lifetime of polypropylene has been investigated using thermogravimetric analysis under nitrogen atmosphere at four different heating rates (i.e. 5, 10, 15, and 20°C/min). The kinetic parameters of degradation were studied over a temperature range of 30–550°C. The derivative thermogravimetric curves have indicated single stage and two stage degradation processes. The activation energy was evaluated by using the Kissinger, Kim-Park, and Flynn-Wall methods under the nitrogen atmosphere. The activation energy value of polypropylene was much higher than that of polylactide. Addition of polylactide and pro-oxidant in polypropylene decreased the activation energy. The lifetime of polypropylene has also decreased with the addition of polylactide and pro-oxidant.

Effect of Carbon as Foaming Agent on Pore Structure of Foam Glass

2010 ◽  
Vol 105-106 ◽  
pp. 765-768 ◽  
Author(s):  
Dong Sheng Lv ◽  
Xiu Hua Li ◽  
Lei Wang ◽  
Juan Juan Du ◽  
Jie Zhang
Keyword(s):  
Particle Size ◽  
Carbon Black ◽  
Heating Rate ◽  
Mechanical Performance ◽  
Foam Glass ◽  
Foam Formation ◽  
Heating Rates ◽  
Foaming Agent ◽  
Foam Structure ◽  
Powder Sintering

Insulation effect and mechanical performance of foam glass depend, to a large extent, on foam structure. Hence understanding foam formation is not only a problem of significant fundamental interest but also of tremendous practical impact. In this paper, foam growth was modeled comparing to grain growth theory in sintering. TG-DTG analysis of carbon black indicated that pre-oxidation took place prior to foaming temperature. Furthermore effects of heating rate and particle size of carbon black on foam structure have been taken into account. Several borosilicate foam glasses were fabricated by powder sintering process at different heating rates using carbon black of different particle sizes as foaming agent, respectively. It was found that increasing the heating rate tended to decrease the pre-oxidation of carbon black resulting in inhomogeneous foam distribution. Foam structure of sample heated at a rate of 8°C/min using carbon black with particle size of 0.15mm was optimal.

scholarly journals Kinetic Analysis of Pyrolysis and Thermo-Oxidative Decomposition of Tennis String Nylon Wastes

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7564
Author(s):  
Haibo Wan ◽  
Zhen Huang
Keyword(s):  
Thermal Degradation ◽  
Kinetic Analysis ◽  
Model Fitting ◽  
Degradation Process ◽  
Nylon 6 ◽  
Reaction Model ◽  
Heating Rates ◽  
Model Free ◽  
Order Chemical Reaction ◽  
First Order Chemical Reaction

Thermal degradation of nylon-6 tennis string nylon wastes in inert nitrogen and air atmospheres was investigated by means of multiple heating-rate thermogravimetric analyses. The results obtained under the heating rates of 5–20 K/min are compared in terms of degradation feature and specific temperature for two atmospheres. Using nonisothermal data, kinetic analysis was thoroughly conducted using various isoconversional model-free methods, including Starink, Madhusudanan–Krishnan–Ninan, Tang, Coats–Redfern, and Flynn–Wall–Ozawa methods. With these kinetic analysis methods, the activation energy over the entire degradation process was successfully calculated. By means of the model-fitting master-plots method, the first-order chemical reaction model was determined to be the most appropriate mechanism function for describing pyrolysis and oxidative thermal degradation of nylon-6 waste. Using kinetic parameters, satisfactory matching against experimental data resulted using the Coats–Redfern method for both cases. Furthermore, thermodynamic parameters such as changes in entropy, enthalpy, and Gibbs free energy during thermal degradation processes were evaluated.

Sign in / Sign up

Export Citation Format

Share Document