UNDERWATER POLE INSPECTION USING TWO MICRO AUVS

2015 ◽  
Vol 74 (9) ◽  
Author(s):  
Yoong Siang Song ◽  
Mohd Rizal Arshad

This article describes the strategy to use two Autonomous Underwater Vehicles (AUVs) in underwater pole inspection work. They are called vehicle A and vehicle B. Vehicle A will surround the pole in counter clockwise direction whereas vehicle B will surround the pole in clockwise direction until the two vehicles meet. Then they will dive a certain distance and continuous surrounding the pole in opposite direction. The mechanical design of both vehicle A and vehicle B are exactly the same. The only different between them is vehicle A will make use of higher capability of underwater navigation and tracking system. Therefore, vehicle A is functioning as lead vehicle. Vehicle A and vehicle B will communicate with each other periodically for control signal dissemination and positioning error.  This article also mention about the prototype design of vehicle A And vehicle B. Some preliminary result of proposed pole inspection system is also included in this article.

Author(s):  
Benedetto Allotta ◽  
Riccardo Costanzi ◽  
Enrico Meli ◽  
Alessandro Ridolfi ◽  
Luigi Chisci ◽  
...  

Developing reliable navigation strategies is mandatory in the field of Underwater Robotics and in particular for Autonomous Underwater Vehicles (AUVs) to ensure the correct achievement of a mission. Underwater navigation is still nowadays critical, e.g. due to lack of access to satellite navigation systems (e.g. the Global Positioning System, GPS): an AUV typically proceeds for long time intervals only relying on the measurements of its on-board sensors, without any communication with the outside environment. In this context, the filtering algorithm for the estimation of the AUV state is a key factor for the performance of the system; i.e. the filtering algorithm used to estimate the state of the AUV has to guarantee a satisfactory underwater navigation accuracy. In this paper, the authors present an underwater navigation system which exploits measurements from an Inertial Measurement Unit (IMU), Doppler Velocity Log (DVL) and a Pressure Sensor (PS) for the depth, and relies on either an Extended Kalman Filter (EKF) or an Unscented Kalman Filter (UKF) for state estimation. A comparison between the EKF approach, classically adopted in the field of underwater robotics and the UKF is given. These navigation algorithms have been experimentally validated through the data related to some sea tests with the Typhoon class AUVs, designed and assembled by the Department of Industrial Engineering of the Florence University (DIEF) for exploration and surveillance of underwater archaeological sites in the framework of the THESAURUS and European ARROWS projects. The comparison results are significant as the two filtering strategies are based on the same process and sensors models. At this initial stage of the research activity, the navigation algorithms have been tested offline. The presented results rely on the experimental navigation data acquired during two different sea missions: in the first one, Typhoon AUV #1 navigated in a Remotely Operated Vehicle (ROV) mode near Livorno, Italy, during the final demo of THESAURUS project (held in August 2013); in the latter Typhoon AUV #2 autonomously navigated near La Spezia in the framework of the NATO CommsNet13 experiment, Italy (held in September 2013). The achieved results demonstrate the effectiveness of both navigation algorithms and the superiority of the UKF without increasing the computational load. The algorithms are both affordable for online on-board AUV implementation and new tests at sea are planned for spring 2015.


2021 ◽  
Vol 2076 (1) ◽  
pp. 012016
Author(s):  
Wen-Lan Wang ◽  
Xiong-Huai Bai

Abstract The Inner Mongolia has abundant solar energy and electricity resources. Because of the long distance between cities, transmission lines are too long, making it difficult to check lines. In order to solve the problems existing in the inspection work, this paper studies a kind of outdoor inspection vehicle using solar energy, the energy system of the inspection vehicle can independently complete the charge and discharge, so as to realize the inspection task. This paper focuses on the energy autonomy of the on-site inspection vehicle for solar energy. According to the design requirements of the inspection vehicle, appropriate parts are selected to build an energy autonomy inspection system for the inspection vehicle. Then the solar tracking algorithm and maximum power tracking control algorithm are used to improve the conversion rate of solar panels and achieve fast charging. Finally, the hardware and software of the solar controller are designed, and the corresponding functions are debugged.


2020 ◽  
Vol 8 (6) ◽  
pp. 413
Author(s):  
Đula Nađ ◽  
Filip Mandić ◽  
Nikola Mišković

SCUBA diving activities are classified as high-risk due to the dangerous environment, dependency on technical equipment that ensures life support, reduced underwater navigation and communication capabilities all of which compromise diver safety. While autonomous underwater vehicles (AUVs) have become irreplaceable tools for seabed exploration, monitoring, and mapping in various applications, they still lack the higher cognitive capabilities offered by a human diver. The research presented in this paper was carried out under the EU FP7 “CADDY—Cognitive Autonomous Diving Buddy”. It aims to take advantage of both human diver and AUV complementary traits by making their synergy a potential solution for mitigation of state of the art diving challenges. The AUV increases diver safety by constantly observing the diver, provides navigation aiding by directing the diver and offers assistance (e.g., lights, tool fetching, etc.). The control algorithms proposed in the paper provide a foundation for implementing these services. These algorithms use measurements from stereo-camera, sonar and ultra-short baseline acoustic localization to ensure the vehicle constantly follows and observes the diver. Additionally, the vehicle maintains a relative formation with the diver to allow observation from multiple viewpoints and to aid underwater navigation by pointing towards the next point of interest. Performance of the proposed algorithms is evaluated using results from pool experiments.


2019 ◽  
Vol 72 (5) ◽  
pp. 1233-1253 ◽  
Author(s):  
Pengyun Chen ◽  
Pengfei Zhang ◽  
Teng Ma ◽  
Peng Shen ◽  
Ye Li ◽  
...  

Conventional underwater navigation and positioning methods for Autonomous Underwater Vehicles (AUVs) either require the installation of acoustic arrays, which make AUVs less independent, or result in cumulative errors. This paper proposes an Underwater Terrain Positioning Method (UTPM) using Maximum a Posteriori (MAP) estimation and a Pulse Coupled Neural Network (PCNN) model for highly accurate navigation by AUVs. The PCNN model is used as a secondary discriminant to effectively identify pseudo-anchor points in flat terrain feature areas and to find the true positioning point, which significantly improves the matching positioning accuracy in these areas. Simulation results show that the proposed method effectively corrects Inertial Navigation System (INS) cumulative errors and has high matching positioning accuracy, which satisfy the requirements of AUV underwater navigation and positioning.


2015 ◽  
Vol 68 (6) ◽  
pp. 1155-1172 ◽  
Author(s):  
Pengyun Chen ◽  
Ye Li ◽  
Yumin Su ◽  
Xiaolong Chen ◽  
Yanqing Jiang

Underwater terrain matching navigation technology is an important research area for the underwater navigation of Autonomous Underwater Vehicles (AUVs). Terrain matching navigation can realise long-term, subtle, all-weather, and high-precision underwater AUV navigation. In this paper, the research status of the application of AUV underwater terrain matching navigation is reviewed, the system composition, theory and terrain matching methods of underwater terrain matching navigation are summarised and the advantages of a multi-beam bathymetric system in underwater terrain matching navigation are discussed. The current research thoughts are summarised, the key issues are pointed out, and possible future development trends are discussed.


2019 ◽  
Vol 72 (06) ◽  
pp. 1602-1622
Author(s):  
Teng Ma ◽  
Ye Li ◽  
Yusen Gong ◽  
Rupeng Wang ◽  
Mingwei Sheng ◽  
...  

Although topographic mapping missions and geological surveys carried out by Autonomous Underwater Vehicles (AUVs) are becoming increasingly prevalent, the lack of precise navigation in these scenarios still limits their application. This paper deals with the problems of long-term underwater navigation for AUVs and provides new mapping techniques by developing a Bathymetric Simultaneous Localisation And Mapping (BSLAM) method based on graph SLAM technology. To considerably reduce the calculation cost, the trajectory of the AUV is divided into various submaps based on Differences of Normals (DoN). Loop closures between submaps are obtained by terrain matching; meanwhile, maximum likelihood terrain estimation is also introduced to build weak data association within the submap. Assisted by one weight voting method for loop closures, the global and local trajectory corrections work together to provide an accurate navigation solution for AUVs with weak data association and inaccurate loop closures. The viability, accuracy and real-time performance of the proposed algorithm are verified with data collected onboard, including an 8 km planned track recorded at a speed of 4 knots in Qingdao, China.


Sign in / Sign up

Export Citation Format

Share Document