Dynamic Modulus of Western Australia Asphalt Wearing Course

2014 ◽  
Vol 71 (3) ◽  
Author(s):  
Gunawan Wibisono ◽  
Hamid Nikraz
Keyword(s):  
Western Australia ◽  
Dynamic Modulus ◽  
Asphalt Mixtures ◽  
Predictive Equation ◽  
Master Curves ◽  
Time Rate ◽  
Low Frequencies ◽  
Design Guide ◽  
Preliminary Study ◽  
Air Void

In the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG), the dynamic modulus |E*| test has been selected to assess the performance of asphalt concretes. The type of test, which relates asphalt mixtures modulus to temperature and time rate of loading, is never used in Western Australia. This paper presents a study on the dynamic modulus of typical Western Australia asphalt mixtures. Five mixtures with 10mm nominal sizes and two types of bitumen classes, i.e. C170 (Pen 60/80) and C320 (Pen 40/60) comply with Main Road Western Australia (MRWA) Specification were used in the research. Mixing and compacting process were carried out according to Austroads methods. The specimens were compacted using a gyratory compactor to achieve 5±0.5% target air void. Testing was performed at four temperatures (4, 20, 40 and 55OC) and six frequencies (25, 10, 5, 1, 0.5, 0.1 and 0.05 Hz). Dynamic modulus and phase angle master curves were generated from the results. The master curves were compared to the curves from Witczak’s predictive equation. From this preliminary study, it was found that the measured values correlated well with the predictive equation except at high temperatures or low frequencies. 

Dynamic Modulus Characteristic of Large Stone Permeable Asphalt Mixtures

2013 ◽  
Vol 423-426 ◽  
pp. 1110-1113
Author(s):  
Jin Cheng Wei ◽  
Jin Li
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixtures ◽  
Sigmoidal Function ◽  
Master Curves ◽  
Low Frequencies ◽  
High Frequencies ◽  
Modified Asphalt ◽  
Large Stone ◽  
Dynamic Modulus Test

To study the dynamic modulus characteristic of LSPM mixes, dynamic modulus test was conducted for Large Stone Permeable Asphalt Mixtures (LSPM ) with neat asphalt and with modified asphalt and the range of dynamic modulus values for LSPM was determined and the dynamic modulus master curves were developed. The magnitude of the dynamic modulus decreased with an increase in temperature and increased with an increase in the frequency. The phase angle decreased as the frequency increased at low temperature. With temperature increase, there was a transition interval, where the phase angle increased up to frequencies of 0.5 Hz, and then it started to decrease as frequency increased. After the transition interval, the phase angle increased with an increase in frequency. Master curves developed by sigmoidal function showed that LSPM with modified asphalt exhibited higher dynamic modulus values at middle and high frequencies and lower dynamic modulus values at low frequencies.

EVALUATION OF THE HIRSCH MODEL FOR DYNAMIC MODULUS ESTIMATION OF ASPHALT MIXTURES

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Hassan Malekzehtab ◽  
Hamid Nikraz
Keyword(s):  
Western Australia ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Recycled Asphalt ◽  
Asphalt Mixture Performance Tester ◽  
Comparison Of The Results ◽  
Asphalt Concrete Pavement ◽  
Cylindrical Samples ◽  
Do So

The dynamic modulus of the asphalt mixtures is an important factor in designing or analyzing an asphalt concrete pavement, but it is expensive and time consuming to measure. Therefore, it is important to develop a model to predict this value. In this regard, the Hirsch model is a popular model, however, it is developed based on a range of U.S. asphalt mixtures and standards. Therefore, it is not certain that it can be used for asphalt mixtures based on materials and codes other than U.S. This article investigated whether this model performs satisfactorily with two typical asphalt mixtures in Western Australia (WA) containing 0, 10, 20, and 30% of recycled asphalt pavement. To do so, cylindrical samples were made with materials and locally established standards in Western Australia and then tested in Asphalt Mixture Performance Tester (AMPT) machine to acquire their dynamic modulus and phase angle values in different loading frequencies (0.01 to 10 Hz) and temperatures (4 to 40°C). Meanwhile, the results are estimated by the Hirsch model using some properties of the mixture and binder. The properties of the binder in different test conditions are obtained using a dynamic shear rheometer. The comparison of the results showed that the dynamic modulus underestimation or overestimation error can reach to 50 and 280% respectively. Generally, this model did not perform well in this study.

scholarly journals Application of FWD data in developing dynamic modulus master curves of in-service asphalt layers

2017 ◽  
Vol 23 (5) ◽  
pp. 661-671 ◽  
Author(s):  
Nader SOLATIFAR ◽  
Amir KAVUSSI ◽  
Mojtaba ABBASGHORBANI ◽  
Henrikas SIVILEVIČIUS
Keyword(s):  
Dynamic Modulus ◽  
Master Curve ◽  
Asphalt Pavements ◽  
Falling Weight Deflectometer ◽  
Master Curves ◽  
Simple Method ◽  
High Frequencies ◽  
Design Guide ◽  
Falling Weight

This paper presents a simple method to determine dynamic modulus master curve of asphalt layers by con­ducting Falling Weight Deflectometer (FWD) for use in mechanistic-empirical rehabilitation. Ten new and rehabilitated in-service asphalt pavements with different physical characteristics were selected in Khuzestan and Kerman provinces in south of Iran. FWD testing was conducted on these pavements and core samples were taken. Witczak prediction model was used to predict dynamic modulus master curves from mix volumetric properties as well as the bitumen viscosity characteristics. Adjustments were made using FWD results and the in-situ dynamic modulus master curves were ob­tained. In order to evaluate the efficiency of the proposed method, the results were compared with those obtained by us­ing the developed procedure of the state-of-the-practice, Mechanistic-Empirical Pavement Design Guide (MEPDG). Re­sults showed the proposed method has several advantages over MEPDG including: (1) simplicity in directly constructing in-situ dynamic modulus master curve; (2) developing in-situ master curve in the same trend with the main predicted one; (3) covering the large differences between in-situ and predicted master curve in high frequencies; and (4) the value obtained for the in-situ dynamic modulus is the same as the value measured by the FWD for a corresponding frequency.

scholarly journals Predict the Phase Angle Master Curve and Study the Viscoelastic Properties of Warm Mix Crumb Rubber-Modified Asphalt Mixture

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5051
Author(s):  
Fei Zhang ◽  
Lan Wang ◽  
Chao Li ◽  
Yongming Xing
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Master Curve ◽  
Loss Modulus ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Master Curves ◽  
Modified Asphalt ◽  
Sigmoidal Model

To identify the most accurate approach for constructing of the dynamic modulus master curves for warm mix crumb rubber modified asphalt mixtures and assess the feasibility of predicting the phase angle master curves from the dynamic modulus ones. The SM (Sigmoidal model) and GSM (generalized sigmoidal model) were utilized to construct the dynamic modulus master curve, respectively. Subsequently, the master curve of phase angle could be predicted from the master curve of dynamic modulus in term of the K-K (Kramers–Kronig) relations. The results show that both SM and GSM can predict the dynamic modulus very well, except that the GSM shows a slightly higher correlation coefficient than SM. Therefore, it is recommended to construct the dynamic modulus master curve using GSM and obtain the corresponding phase angle master curve in term of the K-K relations. The Black space diagram and Wicket diagram were utilized to verify the predictions were consistent with the LVE (linear viscoelastic) theory. Then the master curve of storage modulus and loss modulus were also obtained. Finally, the creep compliance and relaxation modulus can be used to represent the creep and relaxation properties of warm-mix crumb rubber-modified asphalt mixtures.

scholarly journals The Effects of Asphalt Migration on the Dynamic Modulus of Asphalt Mixture

2019 ◽  
Vol 9 (13) ◽  
pp. 2747 ◽  
Author(s):  
Hui Wang ◽  
Shihao Zhan ◽  
Guojun Liu
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Testing Temperature ◽  
Asphalt Mixtures ◽  
Loading Frequency ◽  
Stiffness Parameter ◽  
Master Curves ◽  
Asphalt Content

Asphalt migration is one of the significant detrimental effects on asphalt pavement performance. In order to simulate the state after the occurrence of asphalt migration amid asphalt pavement layers and further investigate the effects of asphalt migration on the dynamic modulus of asphalt mixture, samples with different asphalt contents layers were firstly separated into the upper and lower half portions and then compacted together. By conducting the dynamic modulus test with the Superpave Simple Performance Tester (SPT), the variation laws of the dynamic modulus (|E*|) and the phase angle (δ) at different testing temperatures and loading frequencies were analyzed in this paper. Further, the dynamic modulus and the stiffness parameter (|E*|/sinδ) at the loading frequency of 10 Hz and testing temperature of 50 °C were illustrated. Simultaneously, the master curves of the dynamic modulus and phase angle of asphalt mixtures under different testing conditions were constructed to better investigate the effects of asphalt migration on the dynamic modulus by means of Williams–Landel–Ferry (WLF) equation and Sigmoidal function. Results show that, after the asphalt migration, the dynamic modulus of asphalt mixtures increase with the increasing loading frequency while they decrease with the increasing testing temperature; the dynamic modulus and the stiffness parameter are the highest when asphalt mixtures have the optimum asphalt content layers, and then decrease with the incremental difference of asphalt content in the upper and lower half portions. Besides this, different from the master curves of dynamic modulus, the master curves of phase angle firstly increase with the increase of loading frequency to the highest point and then decrease with the further increase of loading frequency and are not as smooth as that of dynamic modulus. It can be concluded that the asphalt migration has compromised the mixture’s mechanical structure, and the more asphalt migrates, the weaker the mechanical properties of asphalt mixture will be. Additionally, based on the shift factors and master curves in the time–temperature superposition principle (TTSP), the effects of asphalt migration on the dynamic modulus and the variation laws of the dynamic modulus of asphalt mixture after the occurrence of asphalt migration can be better construed at the quantitative level.

Sign in / Sign up

Export Citation Format

Share Document