Hydrophilicity Effect of Rice Husk Silica on Mixed Matrix PSF Membrane Properties

2014 ◽  
Vol 70 (2) ◽  
Author(s):  
Zawati Harun ◽  
Muhamad Fikri Shohur ◽  
Mohd Riduan Jamalludin ◽  
Muhamad Zaini Yunos ◽  
Hatijah Basri
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Rice Husk ◽  
Pure Water ◽  
Water Flux ◽  
Membrane Properties ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Rice Husk Silica ◽  
Phase Inversion Technique

The effects of two types of additives rice husk silica (RHS) towards membrane hydrophilicity and flux performance were investigated. Different percentages or concentrations of rice husk silica (RHS) additive were used to form a mixed matrix membrane. This flat sheet mixed matrix membrane was prepared via phase inversion technique. The fabricated membrane was characterized by contact angle and surface roughness measurements, whereas the flux permeation was measured using pure water flux. The result demonstrated that the addition both types of rice husk silica have increased the hydrophilicity properties of the mixed matrix membrane. Stronger effect of hydrophilicity is shown upon addition of amorphous rice husk particle where both contact angle and surface roughness were reduced and increased, respectively.   

scholarly journals Effect of Polyvinyl Pyrolidone on Morphology and Performance of Cellulose Acetate Based Dialysis Membrane

2019 ◽  
Vol 9 (1) ◽  
pp. 3744-3749
Author(s):  
H. Waheed ◽  
A. Hussain
Keyword(s):  
Contact Angle ◽  
Cellulose Acetate ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Urea Clearance ◽  
And Performance ◽  
Operation Phase

Polyvinyl pyrolidone (PVP) was added as filler in cellulose acetate (CA) to produce mixed matrix membrane (MMM) for hemodialysis operation. Phase separation induced by diffusion (DIPS) was used for fabrication of mixed matrix CA/PVP flat sheet membranes. The effect of adding PVP was investigated on the morphology and permeation efficiencies of CA membranes. The surface arrangement of polymer and additives in pure and blended membrane was studied by FTIR, contact angle and SEM. Results revealed homogenous and significant mixing of PVP content into pure CA matrix. Performance efficiency of blended membranes was investigated by means of pure water flux (PWF), urea clearance and % rejection of bovine serum albumin (BSA). The observable decrease of contact angle from 83° to 69° in CA/PVP MMM membranes of varying composition effectively revealed enhancement in hydrophilicity of MMM membrane surface. For protein rejection, all CA/PVP membranes rejected>90% of BSA relative to 25% for pure CA membrane. Furthermore, urea clearance behavior for CA/PVP membranes was 62.4% in comparison to 52% for pure CA membrane. The incorporation PVP i.e 1% by weight (Mpvp1) significantly improved the hydrophilicity, PWF, BSA rejection and urea clearance percentages of modified CA membrane for dialysis application.

scholarly journals Synthesis of polyethersulfone (PES)/GO-SiO2 mixed matrix membranes for oily wastewater treatment

2019 ◽  
Vol 81 (7) ◽  
pp. 1354-1364 ◽  
Author(s):  
Maryam B. Alkindy ◽  
Vincenzo Naddeo ◽  
Fawzi Banat ◽  
Shadi W. Hasan
Keyword(s):  
Wastewater Treatment ◽  
Water Flux ◽  
Oil Refinery ◽  
Membrane Properties ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Oily Wastewater ◽  
Mixed Matrix ◽  
Phase Inversion Technique ◽  
Oily Wastewater Treatment

Abstract The treatment of oily wastewater continues to pose a challenge in industries worldwide. Membranes have been investigated recently for their use in oily wastewater treatment due to their efficiency and relatively facile operational process. Graphene oxide (GO) and silica (SiO2) nanoparticles have been found to improve membrane properties. In this study, a polyethersulfone (PES) based GO-SiO2 mixed matrix membrane (MMM) was fabricated, using the phase inversion technique, for the treatment of oil refinery wastewater. The PES/GO-SiO2 membrane exhibited the highest water flux (2,561 LMH) and a 38% increase in oil removal efficiency by comparison to a PES membrane. Compared to PES/GO and PES/SiO2 membranes, the PES/GO-SiO2 MMM also displayed the best overall properties in terms of tensile strength, water permeability, and hydrophilicity.

Fabrication and Characterization of PVDF/UiO-66(Zr) Mixed Matrix Membrane on Non-Woven PET Support

2020 ◽  
Vol 1005 ◽  
pp. 108-115
Author(s):  
John Rhoel Cementina ◽  
Michael V. Torres ◽  
Dante P. Bernabe ◽  
Stephen Lirio ◽  
Micah Belle Marie Yap Ang ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Polyvinylidene Fluoride ◽  
Gas Permeability ◽  
Metal Organic Framework ◽  
Pure Water ◽  
Polymer Concentration ◽  
Water Flux ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Metal Organic

Polyvinylidene fluoride (PVDF) membranes, enhanced with metal-organic framework (MOF), were fabricated on a non-woven polyethylene terephthalate (PET) support using the non-solvent induced phase inversion (NIPS) method to produce mixed matrix membrane (MMM). Polymer concentration of 10%, 15%, and 20% were used in the study whereas UiO-66(Zr) was used as a MOF filler. The resulting membranes were characterized in terms of their morphology, porosity, wettability, mechanical strength, pure water flux, and gas permeability. Results show that the presence of UiO-66(Zr) filler improved membrane morphology, mechanical strength, and hydrophobicity of MMM as compared to pristine PVDF.

scholarly journals INCORPORATION OF IMPRINTED-ZEOLITE TO POLYETHERSULFONE/CELLULOSE ACETATE MEMBRANE FOR CREATININE REMOVAL IN HEMODIALYSIS TREATMENT

2019 ◽  
Vol 81 (3) ◽  
Author(s):  
Yanuardi Raharjo ◽  
Mochamad Zakki Fahmi ◽  
Siti Wafiroh ◽  
Alfa Akustia Widati ◽  
Eviomitta Rizki Amanda ◽  
...  
Keyword(s):  
Cellulose Acetate ◽  
Pure Water ◽  
Water Flux ◽  
Hollow Fibre ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Cellulose Acetate Membrane ◽  
Zeolite A ◽  
Mixed Matrix ◽  
Water Contact

Polyethersulfon (PES) membrane has been widely used in the biomedical field especially in hemodialysis application. Many modifications of membranes have been applied into hemodialysis such as diffusion, adsorption, and mixed-matrix membrane. The main problem of those membranes is less selectivity to attract the uremic toxins. In this study, we report the modification of PES mixed with cellulose acetate (PES/CA) membrane as mixed-matrix membrane (MMM) using imprinted-zeolite (PES/CA/IZC) in order to increase the selectivity for targeted analyte. The hollow fibre membranes (HFM) were fabricated by dry-wet spinning technique. The successful zeolite A synthesised and was characterised by x-ray diffraction (XRD). The mixed-matrix membranes were characterised in terms of morphology using scanning electron microscopy (SEM), water contact angle (WCA), pure water flux (PWF), clearance of creatinine (CC), and BSA adsorption. In accordance with the results of characterisation, the synthesis of zeolite A, and imprinted-zeolite creatinine was successfully fabricated. The SEM results showed that the PES/CA/IZC membrane has uniform pores and fingerlike structure. The same result was obtained for PES/CA membrane, but not for PES/CA/ZA membrane. The WCA of the PES/CA; PES/CA/ZA; and PES/CA/IZC were 85.63; 84.98; and 77.53 (o), respectively. While the PWF were 22.84; 27.57, and 40.52 (Lm-2h-1), respectively. The addition of imprinted-zeolite into the membrane improved creatinine removal up to 74.99%. It showed that PES/CA/IZC has succeeded in increasing the selectivity of membranes to attract the creatinine as target analyte. Compared to the PES/CA, the creatinine clearance of membranes improved and increased up to 5.2%. For protein rejection, the PES/CA/IZC rejected 79.05% of bovine serum albumin (BSA). Based on these results, it can be concluded that PES/CA/IZC can be considered as hemodialysis membranes.

scholarly journals Preparation and characterization of polysulfone/zeolite mixed matrix membranes for removal of low-concentration ammonia from aquaculture wastewater

2017 ◽  
Vol 77 (2) ◽  
pp. 346-354 ◽  
Author(s):  
Pourya Moradihamedani ◽  
Abdul Halim Abdullah
Keyword(s):  
Pure Water ◽  
Water Flux ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Low Concentration ◽  
Pore Blockage ◽  
Pure Water Flux ◽  
Aquaculture Wastewater ◽  
Matrix Membranes

Abstract Removal of low-concentration ammonia (1–10 ppm) from aquaculture wastewater was investigated via polysulfone (PSf)/zeolite mixed matrix membrane. PSf/zeolite mixed matrix membranes with different weight ratios (90/10, 80/20, 70/30 and 60/40 wt.%) were prepared and characterized. Results indicate that PSf/zeolite (80/20) was the most efficient membrane for removal of low-concentration ammonia. The ammonia elimination by PSf/zeolite (80/20) from aqueous solution for 10, 7, 5, 3 and 1 ppm of ammonia was 100%, 99%, 98.8%, 96% and 95% respectively. The recorded results revealed that pure water flux declined in higher loading of zeolite in the membrane matrix due to surface pore blockage caused by zeolite particles. On the other hand, ammonia elimination from water was decreased in higher contents of zeolite because of formation of cavities and macrovoids in the membrane substructure.

Effects of polymer blend composition on membrane properties and separation performance of PEES/PEI blend membrane

2016 ◽  
Vol 29 (4) ◽  
pp. 467-475 ◽  
Author(s):  
R Saranya ◽  
JS Beril ◽  
D Mohan
Keyword(s):  
Thermal Stability ◽  
Contact Angle ◽  
Protein Separation ◽  
Pure Water ◽  
Water Flux ◽  
Membrane Properties ◽  
Separation Performance ◽  
Blend Membrane ◽  
Blend Membranes ◽  
Protein Rejection

In this work, an attempt has been made for protein rejection from aqueous solution using ultrafiltration blend membrane based on poly(phenylene ether ether sulfone) (PEES) and polyetherimide (PEI) was prepared in various blend compositions. Prepared membranes were characterized in terms of pure water flux, water content, membrane hydraulic resistance, porosity, contact angle, scanning electron microscopy, thermogravimetric analysis, and attenuated total reflectance-Fourier transform infrared spectroscopy. Studies were carried out to find out the rejection of proteins such as trypsin, pepsin, egg albumin, and bovine serum albumin. The extent of protein separation is directly proportional to molecular weight of protein. Pristine PEES membrane exhibited high-percentage protein rejection of BSA (92.7%), EA (88.2%), pepsin (85.8%), and trypsin (82.2%) compared to PEES/PEI blend membranes. PEES/PEI blend membranes have better hydrophilic property compared to pristine PEES membrane. Pristine PEES has a contact angle of 97.8°, embedded with PEI and reduced to 67.9°. The thermal stability of the membrane was slightly decreased when the percentage of PEI composition into the PEES/PEI blend increased and observed that the pure PEES membrane has superior thermal stability than PEES/PEI blend membranes

scholarly journals Hydrophilicity Enhancement of Metal Oxide Nanoparticles Incorporated Polysulfone Ultrafiltration Membrane

2017 ◽  
Vol 20 (1) ◽  
Author(s):  
N. S. M. Sabri ◽  
H. Hasbullah ◽  
N. Said ◽  
N. Ibrahim ◽  
R. M. Kasmani ◽  
...  
Keyword(s):  
Contact Angle ◽  
Metal Oxide ◽  
Average Pore Size ◽  
Pure Water ◽  
Metal Oxide Nanoparticles ◽  
Water Flux ◽  
Oxide Nanoparticles ◽  
Phase Inversion Technique ◽  
Pure Water Flux ◽  
Bsa Rejection

Hydrophilicity property of membrane is a crucial feature in preventing fouling by most organic components including proteins. In this work, two different metal oxide nanoparticles were selected and their effects on hydrophilicity of polysulfone (PSf) flat sheet membrane for ultrafiltration were investigated. Addition of copper oxide (CuO) and iron oxide (Fe2O3) of 0.25 wt% concentration in N-methyl-2-pyrrolidone (NMP) were also compared to a neat PSf membrane. The membranes were prepared via dry-wet phase inversion technique with 18 wt% of PSf with 5 wt% polyvinylpyrrolidone (PVP). The physical and chemical properties of the prepared membranes were observed by contact angle measurements, porosity, average pore size and scanning electron microscope (SEM). The membranes permeation performance was also examined in term of pure water flux (PWF) and protein rejection by using bovine serum albumin (BSA) solution. Contact angle value of CuO/PSf obtained was 67.1° that was lower than the neat PSf membrane of 87.9° whereas 68.1° for Fe2O3/PSf indicating that metal oxides addition did enhance the membrane hydrophilicity with CuO was slightly better than Fe2O3. The reduction in contact angle ensured that the pure water flux through the membrane with metal oxide additive would improve as well. For CuO, the PWF increased to 159.3 Lm-2hr-1 from 81.3 Lm-2hr-1 of neat PSf, while Fe2O3 showed the PWF at 93.4 Lm-2hr-1. Morphological analyses displayed asymmetric membranes with narrow finger-like structure were formed in this study. A well-formed dense top layer indicated that the membrane would possess good BSA rejection property with 92% of rejection achieved by CuO/PSf membrane. The incorporation of nanoparticles with the membrane is proven to be an effective mean to increase the membrane hydrophilicity with improved water flux and BSA rejection.

The Effect of Polyethelene Glycol on The Performance of Polysulfone Membrane Blend with Silica From Rice Husk

2013 ◽  
Vol 65 (4) ◽  
Author(s):  
Mohd Riduan Jamalludin ◽  
Zawati Harun ◽  
Hatijah Basri ◽  
Muhamad Zaini Yunos ◽  
Muhamad Fikri Shohur ◽  
...  
Keyword(s):  
Humic Acid ◽  
Rice Husk ◽  
Pure Water ◽  
Water Flux ◽  
Polysulfone Membrane ◽  
Membrane Performance ◽  
Membrane Characterization ◽  
Phase Inversion Technique ◽  
Pure Water Flux ◽  
Polyethelene Glycol

In the present work, the effect of rice husk silica (RHS) on the performance of polysulfone (PSf) blended with polyethylene glycol (PEG) membranes were investigated. The hybrid ultrafiltration membranes were prepared by phase inversion technique. The membrane performance was analyzed by using pure water flux, humic acid for the rejection test and followed by the membrane characterization. Results showed that PEG increased membrane pure water flux to 621.212 LMH and rejection humic acid at and 98%. The analysis of SEM revealed that PEG obviously changed the microstructure of the membrane especially at the top and sub layer.

scholarly journals Biochar/Kevlar Nanofiber Mixed Matrix Nanofiltration Membranes with Enhanced Dye/Salt Separation Performance

Membranes ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 443
Author(s):  
Shiguo Gu ◽  
Lei Li ◽  
Fei Liu ◽  
Jian Li
Keyword(s):  
Structural Characteristics ◽  
Pure Water ◽  
Water Flux ◽  
Physical Stability ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Inversion Method ◽  
Separation Performance ◽  
Mixed Matrix ◽  
High Separation

Mixed matrix membranes have received ever-growing attention due to their high separation performance, taking the advantages of both porous fillers and polymer backbones. However, limitations still exist due to the instability of polymers in harsh environments. Here, Kevlar aramid nanofibers, a nanoscale version of poly(paraphenylene terephthalamide), were applied to fabricate a nanofiltration membrane by a thermo-assisted phase inversion method due to their high mechanical strength, physical stability and resistance to solvents. Biochar was incorporated in the Kevlar nanofibers to evaluate its performance in dye/salt separation performance. The fillers’ distribution in the polymeric matrix, structural characteristics, and the interaction of fillers with the polymer in the membrane were characterized via SEM, FTIR, AFM and contact angle analysis. Under the optimal fabrication conditions, the obtained membrane exhibited a pure water flux of 3.83 L m−2 h−1 bar−1 with a dye rejection of 90.55%, 93.54% and 95.41% for Congo red, methyl blue and Reactive blue 19, respectively. Meanwhile, the mixed matrix membrane maintained a salt rejection of 59.92% and 85.37% for NaCl and Na2SO4, respectively. The obtained membrane with high separation performance suggested that Kevlar nanofiber and biochar are good candidates for membrane synthesis.

scholarly journals Elimination of an Endocrine Disruptive Chemical by PSf/TiO2 hybrid Membranes via Membrane Rejection and Photocatalytic Oxidation

2017 ◽  
Vol 19 (1) ◽  
Author(s):  
V. S. Babu ◽  
M. S. Jyothi ◽  
Laveena P. D’Souza ◽  
R. Shwetharani ◽  
Mahesh Padaki ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Photocatalytic Oxidation ◽  
Pure Water ◽  
Water Flux ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Organic Degradation ◽  
Physical Separation ◽  
Angle Measurements

This study reports removal of oxybenzone from TiO2 nanoparticles and those incorporated mixed matrix membrane. Polysulfone and TiO2 nanoparticles mixed matrix membrane were prepared by Diffusion Induced Phase Separation (DIPS) method. The TiO2 nanoparticles and membranes were characterized by XRD, SEM, TEM, Raman spectroscopy and FESEM techniques; analysis depicts 100% anatase with spherical crystallite size averaging around 17 nm. The mixed matrix membranes were used for bifunctional application, physical separation and organic degradation. The membranes were subjected to pure water flux and contact angle measurements, the influence of TiO2 were to increase the hydrophilicity of the membrane, the performance of the membrane in physical separation showed prominent results by removing oxybenzone up to 95% where as in organic degradation membrane showed 80% of degradation. The efficiency of the membrane in degradation was more prominent as compared to bare TiO2 nanoparticles. The TiO2 nanoparticles show around 70% of degradation, whereas, the bifunctionality of the membranes showed more prominence in removal of complete oxybenzone.

Sign in / Sign up

Export Citation Format

Share Document