Is fiscal revenue concentration ratio in China too high?

World Economy ◽  
2019 ◽  
Vol 42 (7) ◽  
pp. 1932-1960
Author(s):  
Hongsheng Fang ◽  
Wenjun Shuai ◽  
Linhui Yu ◽  
Jun Zhang
Keyword(s):  
Concentration Ratio ◽  
Fiscal Revenue ◽  
Revenue Concentration

Silicate analysis of carbonated rocks using ICP-AES with calibration by the concentration ratio

2020 ◽  
Vol 86 (5) ◽  
pp. 16-21
Author(s):  
T. A. Karimova ◽  
G. L. Buchbinder ◽  
S. V. Kachin
Keyword(s):  
Inductively Coupled Plasma ◽  
Concentration Ratio ◽  
Total Error ◽  
Atomic Emission ◽  
Emission Spectrometry ◽  
Calibration Error ◽  
Plasma Atomic Emission Spectrometry ◽  
Standard Samples ◽  
Inductively Coupled ◽  
Carbonate Materials

Calibration by the concentration ratio provides better metrological characteristics compared to other calibration modes when using the inductively coupled plasma atomic emission spectrometry (ICP-AES) for analysis of geological samples and technical materials on their base. The main reasons for the observed improvement are: i) elimination of the calibration error of measuring vessels and the error of weighing samples of the analyzed materials from the total error of the analysis; ii) high intensity of the lines of base element; and iii) higher accuracy of measuring the ratio of intensities compared to that of measuring the absolute intensities. Calcium oxide is better suited as a base when using calibration by the concentration ratio in analysis of carbonate rocks, technical materials, slags containing less than 20% SiO2 and more than 20% CaO. An equation is derived to calculate the content of components determined in carbonate materials when using calibration by the concentration ratio. A method of ICP-AES with calibration by the concentration ratio is developed for determination of CaO (in the range of contents 20 – 100%), SiO2 (2.0 – 35%), Al2O3 (0.1 – 30%), MgO (0.1 – 20%), Fe2O3 (0.5 – 40%), Na2O (0.1 – 15%), K2O (0.1 – 5%), P2O5 (0.001 – 2%), MnO (0.01 – 2%), TiO2 (0.01 – 2.0%) in various carbonate materials. Acid decomposition of the samples in closed vessels heated in a HotBlock 200 system is proposed. Correctness of the procedure is confirmed in analysis of standard samples of rocks. The developed procedure was used during the interlaboratory analysis of the standard sample of slag SH17 produced by ZAO ISO (Yekaterinburg, Russia).

Sustainable Cooling with Hybrid Concentrated Photovoltaic Thermal (CPVT) System and Hydrogen Energy Storage

2018 ◽  
Vol 1 (2) ◽  
pp. 40-51 ◽  
Author(s):  
Muhammad Burhan ◽  
Muhammad Wakil Shahzad ◽  
Kim Choon Ng
Keyword(s):  
Energy Storage ◽  
Solar Energy ◽  
Optimization Algorithm ◽  
Concentration Ratio ◽  
Cooling System ◽  
Renewable Energy Sources ◽  
Hot Water ◽  
Hydrogen Energy ◽  
Adsorption Chiller ◽  
Back Plate

Standalone power systems have vital importance as energy source for remote area. On the other hand, a significant portion of such power production is used for cooling purposes. In this scenario, renewable energy sources provide sustainable solution, especially solar energy due to its global availability. Concentrated photovoltaic (CPV) system provides highest efficiency photovoltaic technology, which can operate at x1000 concentration ratio. However, such high concentration ratio requires heat dissipation from the cell area to maintain optimum temperature. This paper discusses the size optimization algorithm of sustainable cooling system using CPVT. Based upon the CPV which is operating at x1000 concentration with back plate liquid cooling, the CPVT system size is optimized to drive a hybrid mechanical vapor compression (MVC) chiller and adsorption chiller, by utilizing both electricity and heat obtained from the solar system. The electrolysis based hydrogen is used as primary energy storage system along with the hot water storage tanks. The micro genetic algorithm (micro-GA) based optimization algorithm is developed to find the optimum size of each component of CPVT-Cooling system with uninterrupted power supply and minimum cost, according to the developed operational strategy. The hybrid system is operated with solar energy system efficiency of 71%.

The Effect of Concentrated Light Intensity on Temperature Coefficient of the InGaP/InGaAs/Ge Triple-Junction Solar Cell

2015 ◽  
Vol 8 (1) ◽  
pp. 106-111 ◽  
Author(s):  
Zilong Wang ◽  
Hua Zhang ◽  
Wei Zhao ◽  
Zhigang Zhou ◽  
Mengxun Chen
Keyword(s):  
Solar Cell ◽  
Light Intensity ◽  
Temperature Dependence ◽  
Temperature Coefficient ◽  
Triple Junction ◽  
Concentration Ratio ◽  
Crystalline Silicon ◽  
Photovoltaic System ◽  
Solar Pv ◽  
Junction Solar Cell

Research on automatic tracking solar concentrator photovoltaic systems has gained increasing attention in developing the solar PV technology. A paraboloidal concentrator with secondary optic is developed for a three-junction GaInP/GalnAs/Ge solar cell. The concentration ratio of this system is 200 and the photovoltaic cell is cooled by the heat pipe. A detailed analysis on the temperature coefficient influence factors of triple-junction solar cell under different high concentrations (75X, 100X, 125X, 150X, 175X and 200X) has been conducted based on the dish-style concentration photovoltaic system. The results show that under high concentrated light intensity, the temperature coefficient of Voc of triple-junction solar cell is increasing as the concentration ratio increases, from -10.84 mV/°C @ 75X growth to -4.73mV/°C @ 200X. At low concentration, the temperature coefficient of Voc increases rapidly, and then increases slowly as the concentration ratio increases. The temperature dependence of η increased from -0.346%/°C @ 75X growth to - 0.103%/°C @ 200X and the temperature dependence of Pmm and FF increased from -0.125 W/°C, -0.35%/°C @ 75X growth to -0.048W/°C, -0.076%/°C @ 200X respectively. It indicated that the temperature coefficient of three-junction GaInP/GalnAs/Ge solar cell is better than that of crystalline silicon cell array under concentrating light intensity.

scholarly journals Stretchable micro-scale concentrator photovoltaic module with 15.4% efficiency for three-dimensional curved surfaces

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Daisuke Sato ◽  
Taizo Masuda ◽  
Kenji Araki ◽  
Masafumi Yamaguchi ◽  
Kenichi Okumura ◽  
...  
Keyword(s):  
Concentration Ratio ◽  
Power Conversion ◽  
Three Dimensional ◽  
Thin Film Solar Cells ◽  
Photovoltaic Module ◽  
Silicon Compound ◽  
Curved Surfaces ◽  
Power Sources ◽  
Micro Scale ◽  
Module Design

AbstractStretchable photovoltaics are emerging power sources for collapsible electronics, biomedical devices, and buildings and vehicles with curved surfaces. Development of stretchable photovoltaics are crucial to achieve rapid growth of the future photovoltaic market. However, owing to their rigidity, existing thin-film solar cells based predominantly on silicon, compound semiconductors, and perovskites are difficult to apply to 3D curved surfaces, which are potential real-world candidates. Herein, we present a stretchable micro-scale concentrator photovoltaic module with a geometrical concentration ratio of 3.5×. When perfectly fitted on a 3D curved surface with a sharp curvature, the prototype module achieves an outdoor power conversion efficiency of 15.4% and the daily generated electricity yield improves to a maximum of 190% relative to a non-concentration stretchable photovoltaic module. Thus, this module design enables high areal coverage on 3D curved surfaces, while generating a higher electricity yield in a limited installation area.

scholarly journals A New Approach for Design Optimization and Parametric Analysis of Symmetric Compound Parabolic Concentrator for Photovoltaic Applications

2021 ◽  
Vol 13 (9) ◽  
pp. 4606
Author(s):  
Faisal Masood ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Javed Akhter ◽  
Mohammad Azad Alam
Keyword(s):  
Parametric Analysis ◽  
Concentration Ratio ◽  
Synergistic Effects ◽  
Geometric Optimization ◽  
Design Parameters ◽  
Imaging Device ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications ◽  
Half Angle ◽  
The Impact

A compound parabolic concentrator (CPC) is a non-imaging device generally used in PV, thermal, or PV/thermal hybrid systems for the concentration of solar radiation on the target surface. This paper presents the geometric design, statistical modeling, parametric analysis, and geometric optimization of a two-dimensional low concentration symmetric compound parabolic concentrator for potential use in building-integrated and rooftop photovoltaic applications. The CPC was initially designed for a concentration ratio of “2×” and an acceptance half-angle of 30°. A MATLAB code was developed in house to provoke the CPC reflector’s profile. The height, aperture width, and concentration ratios were computed for different acceptance half-angles and receiver widths. The interdependence of optical concentration ratio and acceptance half-angle was demonstrated for a wide span of acceptance half-angles. The impact of the truncation ratio on the geometric parameters was investigated to identify the optimum truncation position. The profile of truncated CPC for different truncation positions was compared with full CPC. A detailed statistical analysis was performed to analyze the synergistic effects of independent design parameters on the responses using the response surface modeling approach. A set of optimized design parameters was obtained by establishing specified optimization criteria. A 50% truncated CPC with an acceptance half-angle of 21.58° and receiver width of 193.98 mm resulted in optimum geometric dimensions.

Electrolyte handling by the superficial nephron of the rabbit

1986 ◽  
Vol 250 (4) ◽  
pp. F590-F595 ◽  
Author(s):  
N. L. Wong ◽  
S. J. Whiting ◽  
C. L. Mizgala ◽  
G. A. Quamme
Keyword(s):  
Glomerular Filtration Rate ◽  
Proximal Tubule ◽  
Concentration Ratio ◽  
Filtration Rate ◽  
Distal Tubule ◽  
Mean Value ◽  
Loop Of Henle ◽  
Collection Site ◽  
Micropuncture Study ◽  
The Mean

A micropuncture study of the rabbit was performed to evaluate the function of the superficial nephron. The mean glomerular filtration rate of the left micropunctured kidney was 4.0 +/- 0.8 ml/min. The concentration profile of electrolytes within the proximal tubule was similar to that of species previously investigated except for potassium. The mean tubular fluid (TF)-ultrafilterable (UF) concentration ratios were as follows: sodium, 1.01 +/- 0.03; chloride, 1.14 +/- 0.04; calcium, 1.12 +/- 0.04; magnesium, 1.47 +/- 0.08; and phosphate, 0.94 +/- 0.09, with a mean TF-plasma (P) inulin concentration ratio of 1.78 +/- 0.14 (n = 32). The TF/UF potassium value significantly increased in association with TF/P inulin to a mean value of 1.26 +/- 0.06. Accordingly, 29% of the filtered potassium was reabsorbed in the superficial proximal tubule compared with 43% of the filtered sodium. The loop of Henle reabsorbed 55-60% of the filtered sodium, chloride, and calcium, whereas considerably less magnesium (33%) was reabsorbed. Segments beyond the distal tubule collection site reabsorbed little of the delivered magnesium, which supports the notion that the loop of Henle is the principal segment accounting for adjustments in magnesium balance. These studies indicate that the superficial nephron of the rabbit performs similar to other species reported, except potassium reabsorption is significantly less in the proximal convoluted tubule.

Sign in / Sign up

Export Citation Format

Share Document